This tube is designed to be a part of the intake system, generally placed between the Air Filter and primary hose when replacing the Airbox for an Open Air intake kit
Measuring 70mm externally from edge to edge and housing the twist type sensors found on post 2015 fords.
Pipe is fully black with engraved EP Logo, Featuring Bracket and black screw to secure sensor.
Designed to fit with an air filter using a 70mm Inlet
Confirmed Fitment:
Ford Fiesta MK8 & MK8.5 2018 >
Ford Puma ST MK2 2019 >
Ford Focus MK4 All Petrol Models 2018 >
May fit others.
This is a replacement ring only for Enhanced Performance Weighted Gear Knob (CEWGKC)
Simply slide off your original band and swap it for a different colour, either if you fancy a change or if you have grubby hands and have discoloured your existing band!
-----------------
This beautiful piece of kit just got more personal!
We give you the customisable Enhanced Performance Weighted Gear Knob
Finished in an Anodized Black and supplied with a silicone ring in your chosen colour, not only does this give you an element of performance gain with its weight, combined with the comfort provided from our aesthetic design - but the look can be totally unique to yourself and your theme!
The silicone Band is available in one of 4 colours and can be easily removed and replaced with another colour, by simply purchasing our silicone ring pack!
Summary
Perfect fit for our Gear Knob
Easily replaced, simply stretch old one off and slide new ring on
High quality silicone material, easily cleaned and maintained
4 vibrant colours with potential for more in future
Confirmed fitment:
Ford Fiesta MK7 with Lift Up reverse Lever (2012-2017)
Ford Fiesta MK8 All Models
Ford Focus MK3 All Models
Ford Focus MK4 All Models
Ford Transit Custom All Models
Any Vehicle with M12 x 1.25 thread & Lift Up Reverse Lever
Please note: Whilst this is hard anodized for durability, the wearing of rings on your shift hand could cause scratches to the surface area - This isn't covered under warranty
This beautiful piece of kit just got more personal!
We give you the customisable Enhanced Performance Weighted Gear Knob
Finished in an Anodized Black and supplied with a silicone ring in your chosen colour, not only does this give you an element of performance gain with its weight, combined with the comfort provided from our aesthetic design - but the look can be totally unique to yourself and your theme!
The silicone Band is available in one of 4 colours and can be easily removed and replaced with another colour, by simply purchasing our silicone ring pack!
Summary
Hard Anodised in Black for that perfect aesthetic
Choice of 4 colours - as well as additional ring pack
Laser Engraved EP (Enhanced Performance) Logo
Direct replacement for existing Gear Knob
Confirmed fitment:
Ford Fiesta MK7 with Lift Up reverse Lever (2012-2017)
Ford Fiesta MK8 All Models
Ford Focus MK3 All Models
Ford Focus MK4 All Models
Ford Transit Custom All Models
Any Vehicle with M12 x 1.25 thread & Lift Up Reverse Lever
Please note: Whilst this is hard anodized for durability, the wearing of rings on your shift hand could cause scratches to the surface area - This isn't covered under warranty
The Enhanced Performance sump plug is not just for show, It is a simple yet highly effective upgrade that can help lengthen the life of your engine!
Cut from a single piece of Billet aluminium and headed off with a powerful magnet the plug helps to pick up all the metal flowing round the system and keep it within the sump, so as not to flow further round the internals and cause more damage.
Compatible with the following vehicle:
MK4 Focus ST 2.3 EcoBoost (2018-)
Any Other Vehicle using M12 x 1.5 Sump Plug
What's in the kit:
1x Magnetic Sump Plug
1x Washer
The Enhanced Performance sump plug is not just for show, It is a simple yet highly effective upgrade that can help lengthen the life of your engine!
Cut from a single piece of Billet aluminium and headed off with a powerful magnet the plug helps to pick up all the metal flowing round the system and keep it within the sump, so as not to flow further round the internals and cause more damage.
Compatible with the following vehicle:
MK4 Focus 1.5 EcoBoost
Any Other Vehicle using M14 x 1.5 Sump Plug
What's in the kit:
1x Magnetic Sump Plug
1x Washer
Its finally here!
The Enhanced Performance quick shift for the MK4 Focus 1L EcoBoost from CEUK
Made from CNC Machined T6061 Aluminium
Easily installed in 10-15 minutes
Hard Anodized Black for durabilit
3 Different throw Levels (10% / 20% / 30% reduction)
Engraved with CEUK Traditional Logo
Perfectly engineered to allow you to speed up your shifting and get the power down sooner!
Protected under UK Copyright Law - Design Right Reference: 6103777
Protected by UK Copyright Law: Ref 6122261
Its finally here!
The Enhanced Performance quick shift for the MK4 Focus 1.5T from CEUK
Made from CNC Machined T6061 Aluminium
Easily installed in 10-15 minutes
Hard Anodized Black for durability
2 Different throw Levels (15% & 25% reduction)
Engraved with CEUK Traditional & Workshop Logo
Perfectly engineered to allow you to speed up your shifting and get the power down sooner!
Protected by UK Copyright Law: Ref 6122258
The all new Enhanced Performance by CEUK quick shift is here for the MK4 Focus ST
Fits both Diesel & Petrol Models
A 20% reduction in the throw of your gear changes allows for a quicker transition through the gearbox as you aim to improve that 0-60 time!
Simply attaching to your shifter arm the quick shift changes the location of the linkage connection point allowing for smooth and fast changes!
These take literally 3-4 minutes to install
Features:
Made from CNC Billet aluminium for extreme strength and durability
20% Reduction in gear change
Lifetime warranty on the EP part
Stainless Steel fixings & bolts
Enhanced Performance & CEUK Logo
This is a completely DIY item and can be removed easily!
Please Note: It is recommended to use Loctite on all 3 bolts & the ball screw!
Copyright Pending
Installation Video
Enamel EP logo badge
Perfect for the boot of your vehicle or anywhere else you would like to affix it, this badge comes with a super strong foam tape backing to be secured on any smooth surface!
Show your support in style with this beautifully crafted chrome EP logo shaped badge!
Quality has to be seen to be believed, they’re second to none!
"Its so good we put our name on it"
Giving you the brand new Enhanced Pro Filter - Made by ProRam exclusively for CEUK (RamAir)
The filter itself has a 90mm Inlet, and comes with 4x Reducer Rings allowing it to be installed to an 85mm, 80mm, 75mm and 70mm inlet also!
A metal end cap allows for our EP Logo & the iconic CEUK logo to be laser engraved, whilst durable rubber polymer is used at the base to provide strength!
Reinforced wire mesh holds this synthetic black cotton piece together with the grab bar featuring the iconic ProRam Logo.
The perfect replacement filter for your air intake kit!
Neck Inside Diameter (A): 90mm
Overall Width (B): 150mm
Overall Length: 165mm