![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)
Performance - Ford Focus MK4 (2018-Present)
forge Motorsport Forge Motorsport - Ford Focus MK4 ST 280 Brake Lines
Product Description A set of 4 ultra-high performance brake lines for the Ford Focus ST 280. These are a direct replacement/upgrade for the OEM brake line set and require no further modifications to fit. Hosetechnik lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings, resulting in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level. They are available in multiple hard-wearing PVC sleeve colours, which look amazing, and protect against dirt and water ingress. Our hoses eliminate all the problems associated with standard OE lines Immediate brake pedal response Lifetime Warranty Choice of colour Reduces pedal sponginess under hard braking Compatible with all brake fluids Will not corrode
£101.99
forge Motorsport Forge Motorsport - Gold Heat Resistant Wrap
State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…
£27.51
forge Motorsport Forge Motorsport - Recirculating Valve for Ford Focus ST MK4
Product Description Replaces OEM part Number CJ5G-9U465-BA This valve is for the turbocharged 2.3-litre EcoBoost petrol engine found in the Ford Focus ST280. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade. Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included, and everything is designed to make installation as simple as possible.
£249.63
forge Motorsport Forge Motorsport - Atmospheric Dump Valve for Ford Focus ST MK4
Replaces OEM part Number CJ5G-9U465-BA This valve is for the turbocharged 2.3-litre EcoBoost petrol engine found in the Ford Focus ST280. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade. Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included, and everything is designed to make installation as simple as possible.
£249.63
forge Motorsport Forge Motorsport - Boost Gauge Fitting Kit for VAG 1.5 TSI and Ford Focus ST280
Forge Motorsport Boost Tap Kit for 1.5 TSI Engines and late 1.4 TSI engine from 2018 onwards. This adaptor installs inbetween the intake manifold vacuum pipe and the vacuum hose coming from it A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment. Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible. In the Box: AdapterSmall Forge StickerCable ties (x10)3 metres of 4mm Vacuum HoseInstructions Download
£49.91
forge Motorsport Forge Motorsport - Pipercross Carbon Air Filter Canister with 76mm O/D Inlet/Outlets
Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.
£91.94
forge Motorsport Forge Motorsport - Atmospheric Dump Valve for Ford Focus 1.5T
This valve is for the turbocharged 1.5-litre EcoBoost petrol engine. It is recommended for any vehicle where the boost pressure has or is going to be increased by an ECU software upgrade, Our alternative is a fully engineered solution, offering significantly improved reliability. Our valve and installation kit replaces the original unit with a pressure/vacuum operated piston valve, that still also retains the desirable OEM ECU control over valve actuation. This product has been thoroughly designed and tested with the expressed intent of offering improved valve response and maintaining ECU control while resulting in absolutely NO fault codes, NO check engine lights, and no adverse effects of any kind. All of the necessary components and detailed instructions are included and everything is designed to make installation as simple as possible. In the Box:Solenoid & Bracket Wiring Harness Vac Tap Blue idle springForge Keyring & Sticker4mm Vacuum HoseCable Ties (x10)Instructions Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
£159.76
![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)