![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)
Performance - Ford Focus MK4 (2018-Present)
Wide Mouth / Snorkel - MK4 / 4.5 Ford Focus
Wide Mouth / Snorkel / Big Mouth / RamAir Snorkel - MK4 / 4.5 Focus Injection moulded and manufactured from ABS, not 3D printed like others! Bolts straight in place (No Fitting Kit Supplied) Available in multiple colours. Enables cold air from the grille to be sucked directly into the air feed and straight to the airbox.
£48.00
Enhanced Edition Double Boot Light Kit - Full Replacement LED Boot Unit - MK4 Focus
A standard boot bulb not bright enough? The LED bulb just not quite cutting it? One unit just not giving you enough? This is for you! The all new Double Boot Kit with Full LED replacement Unit is here, and features a whopping 18 LED'S Per side that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! And thats just per side! This fully replaces the OEM unit and bulb to look fully OEM once installed! This kit does require you to trim the boot plastic to create a hole for the new unit to sit. When you remove the trim, there is a cutting template on the rear of the panel to follow! Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just Minutes after the cutting is complete 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK4 Focus All Models (Including Facelift) Whats in the kit? 2x 18SMD Full Replacement Boot Units 1x Wiring Loom Extension How does this kit work? The kit uses the single plug already in place that plugs to your current boot light, the extension has a splitter at the connection end and then enough cable to route to the other side of the boot to reach the second unit, so both light units are powered off a single connection. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£34.00
Maxton Design Maxton Design - Front Splitter V.8 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.8 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.7 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.7 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.6 Ford Focus ST / ST-Line Mk4
Front Splitter V.6 Ford Focus ST / ST-Line Mk4 FITS ONLY:Ford Focus Hatchback ST Mk4 2019 - 2021Ford Focus Hatchback ST-Line Mk4 2018 - 2021Ford Focus Estate ST Mk4 2019 - 2021Ford Focus Estate ST-Line Mk4 2018 - 2021 COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.5 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.5 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.3 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.3 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.2 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.2 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.1 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.1 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Set of 4 vinyl logo stickers
Set of 4 vinyl stickers to use interior or exterior the possibilities are endless Approx 3cm
£2.00
ebc EBC Big Brake Kit (Multiple Options) - Ford Focus MK4 ST
KIT IS 355MM FITS: MAKE MODEL VARIANT ENGINE SIZE (L) FUEL TYPE YEAR BHP Ford Focus ST MK4 2.3 Turbo Petrol 2019 280 Ford Focus ST MK4 2.3 Turbo Petrol 2020 280 Ford Focus ST MK4 2.3 Turbo Petrol 2021 280 Ford Focus ST MK4 2.3 Turbo Petrol 2022 280
£2,073.02
GFB GFB T9484 VTA with integrated solenoid for Ford EcoBoost Engines
performance blow-off valve for Ford EcoBoost engines Fits 2019-on 1.5, 1.6 (US-spec), 2.3 and 3.0 EcoBoost.The T9484 VTA is a performance blow-off valve solution for Ford EcoBoost enginesIf You Want Sound With Your Performance (Or Performance With Your Sound!), GFB’s T9484 VTA Delivers!By combining atmosphere venting with the proven performance benefits of our ground-breaking DV+, the VTA delivers an aggressive blow-off sound, improved throttle response, as well as superior boost holding and reliability.With its low-profile integrated solenoid and compact design, installing the T9484 is a breeze. Just swap out your factory diverter valve with the VTA, and you’re good to go!Key features and benefits: Blow off sound AND better performance Reliable boost holding Sharper throttle response, faster boost recovery Low-profile integrated solenoid for seamless installation Australian-made, backed by a lifetime warranty T9484 is a direct bolt-on for Ford EcoBoost vehicles that have an electronic OEM diverter/bypass valve.Fits: Ford Mustang S550 2.3 EcoBoost 2019-2023 Ford Fiesta ST 1.5 EcoBoost 2019-On Ford Focus 1.5 EcoBoost (4 Cylinder) (Mk4 2019-On) Ford Fiesta ST 1.6 Ecoboost 2013-2017 (US Spec Only) Ford Mustang S550 2.3 EcoBoost 2014-2018 Ford Focus 1.5/1.6 EcoBoost (Mk3 2015-18) Ford Focus ST 2.3L EcoBoost (Mk4 2019-On) Ford Mustang S550 2.3 EcoBoost 2019-2023 Ford Ranger Raptor 3.0 EcoBoost 2022-On Kit includes: 1 x T9484 VTA blow-off valves are constructed with the same materials and valve mechanism as the DV+, and they offer the exact same performance and boost holding. However, venting to atmosphere gives it the signature blow-off sound, whilst the DV+ keeps things quiet. Competitors' products for the same vehicles that make sound (i.e. BOV "Spacers") typically retain the performance deficiencies of the factory diverter valve, delete the ECU control, or require frequent maintenance and rebuilds. The VTA on the other hand is the complete package - performance, fit, reliability, and sound! Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet. Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications. Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.
£207.90
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Number Plate Tags - Ford Logo's
Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo
£6.00
Ford Replacement Door Sill Plates
For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles! But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up? And up we came with this! Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice! Then, you can choose your design and design colours accordingly! These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside! Simply clean the area, remove the backing tape and stick in place - away you go! These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up! Build your own: The base plate is always GLOSS BLACK - this can not be seen! Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended) Accent Colour: This is the design at either side of the logo - EG the lines Logo Colour: The colour you want of the logo in the centre! Measurements: 50cm Sill 60cm Sill CM MM Width: 50cm Width: 500mm Width: 60cm Width: 600mm Height: 5cm Height: 50mm Height: 5cm Height: 50mm Thickness: 0.5cm Thickness: 5mm Thickness: 0.5cm Thickness: 5mm Customisation: Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote! ETA This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!
£25.00 - £30.00
CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Estate)
CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). ESTATE ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus ESTATE Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 2 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!
£12.00
Scorpion Scorpion Exhausts - Exhaust Tunnel Brace - Ford Focus MK4
Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) FITS: Focus ST MK4 Focus ST MK4 Estate
£79.00£71.10
CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Hatchback)
CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). HATCHBACK ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus Hatchback Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 4 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through - should you wish to have a coloured ST logo insert for your guards these are sold separately here Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!
£12.00
Enhanced Edition 955 (T15) LED indicator upgrade - canbus friendly
955 (T15) LED indicator upgrade these replace any wedge fit indicator bulbs for ultra bright LED canbus friendly alternative upgrade your output today and be sure to never be missed again! 5x brighter than OEM - Canbus friendly in most vehicles
£20.00£18.00
![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)