![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)
Performance - Ford Focus MK4 (2018-Present)
Wide Mouth / Snorkel - MK4 / 4.5 Ford Focus
Wide Mouth / Snorkel / Big Mouth / RamAir Snorkel - MK4 / 4.5 Focus Injection moulded and manufactured from ABS, not 3D printed like others! Bolts straight in place (No Fitting Kit Supplied) Available in multiple colours. Enables cold air from the grille to be sucked directly into the air feed and straight to the airbox.
£48.00
Enhanced Edition Double Boot Light Kit - Full Replacement LED Boot Unit - MK4 Focus
A standard boot bulb not bright enough? The LED bulb just not quite cutting it? One unit just not giving you enough? This is for you! The all new Double Boot Kit with Full LED replacement Unit is here, and features a whopping 18 LED'S Per side that are all pointing in the direction that you need it! 5x Brighter than our boot bulb upgrade alone and 18x brighter than OEM, this really is Enhanced! And thats just per side! This fully replaces the OEM unit and bulb to look fully OEM once installed! This kit does require you to trim the boot plastic to create a hole for the new unit to sit. When you remove the trim, there is a cutting template on the rear of the panel to follow! Specs: Long Life Span & Fully Error Free Low Power Consumption with High Lumen Output Simple to install - Takes just Minutes after the cutting is complete 12v | 5000K White OR Choice Of Colour | Direct OEM Plug Fitment Confirmed Fitting Vehicles (May Fit Others Not Listed): MK4 Focus All Models (Including Facelift) Whats in the kit? 2x 18SMD Full Replacement Boot Units 1x Wiring Loom Extension How does this kit work? The kit uses the single plug already in place that plugs to your current boot light, the extension has a splitter at the connection end and then enough cable to route to the other side of the boot to reach the second unit, so both light units are powered off a single connection. Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
£34.00
Maxton Design Maxton Design - Side Skirts Diffusers V.4 Ford Focus ST / ST-Line Mk4 Facelift
Side Skirts Diffusers V.4 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS: -> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
£184.00
Maxton Design Maxton Design - Side Skirts Diffusers V.5 Ford Focus ST / ST-Line Mk4 Facelift
Side Skirts Diffusers V.5 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS: -> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
£184.00
Maxton Design Maxton Design - Side Skirts Diffusers V.3 Ford Focus ST / ST-Line Mk4 Facelift
Side Skirts Diffusers V.3 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS: -> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
£184.00
Maxton Design Maxton Design - Side Skirts Diffusers V.1 Ford Focus ST / ST-Line Mk4 Facelift
Side Skirts Diffusers V.1 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS: -> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
£184.00
Maxton Design Maxton Design - Front Splitter V.8 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.8 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.7 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.7 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.6 Ford Focus ST / ST-Line Mk4
Front Splitter V.6 Ford Focus ST / ST-Line Mk4 FITS ONLY:Ford Focus Hatchback ST Mk4 2019 - 2021Ford Focus Hatchback ST-Line Mk4 2018 - 2021Ford Focus Estate ST Mk4 2019 - 2021Ford Focus Estate ST-Line Mk4 2018 - 2021 COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.5 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.5 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.3 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.3 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.2 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.2 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.1 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.1 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches. Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox
£174.00
Maxton Design Maxton Design - Front Splitter V.4 Ford Focus ST / ST-Line Mk4 Facelift
Front Splitter V.4 Ford Focus ST / ST-Line Mk4 Facelift FITS ONLY:Ford Focus ST Hatchback Mk4 Facelift 2021 -Ford Focus ST Estate Mk4 Facelift 2021 -Ford Focus ST-Line Hatchback Mk4 Facelift 2021 -Ford Focus ST-Line Estate Mk4 Facelift 2021 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.
£174.00
Maxton Design Maxton Design - Spoiler CAP V.2 Ford Focus Estate ST-Line Mk4
Spoiler CAP V.2 Ford Focus Estate ST-Line Mk4 FITS ONLY:Ford Focus Estate ST-Line Mk4 (2018-) COMPLETE SET CONTAINS:-> Spoiler Extension + 3M Tape-> Degreasing Cloth-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.
£134.00
PlexiClick® - Invisible Number Plate Holder Clip
This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily
£10.00
Set of 4 vinyl logo stickers
Set of 4 vinyl stickers to use interior or exterior the possibilities are endless Approx 3cm
£2.00
Pro Props Pro Props Carbon Fibre Bonnet / Boot / Door Show Prop
Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)
£69.99
Number Plate Tags - Ford Logo's
Check out our 4D Number Plate Tags, Designed to be fitted with 4D number plates (but can be fitted to any UK Number plate) Available in any colour you want, with an array of logo's; again, in any colour you want! These simply stick to the left side of your number plate using the pre applied weatherproof backing tape! The tags are only 50mm wide meaning they are 100% legal in terms of sizing under UK number plate law. This listing is for one pair (2 tags) Customise: You choose the colour of your tag! You choose the logo / emblem You choose the orientation of the logo You choose the colour of the logo! Options: We've created 2 sizes, Option 1 is for vehicles who do not use a number plate holder or frame of any kind and just have the plate on the car, this is designed to stick on the left side of the plate and cover it fully. Option 2 is for vehicles which have a number plate frame / holder - is designed a bit smaller so that it fits inside and still gives you the desired look (See disclaimer below) Measurements: Option 1: H 110mm // W 50mm // T 3mm Option 2: H 100mm // W 47mm // T 3mm Want something Custom? Drop us an email to support@ceuk.org and our design team would love to help! Dislciamer: The full size option may not follow the corners of your number plate and may be larger - this is designed to be universal and fit all number plates, it will always cover the corner completely The smaller option may have a 1-2mm border between the tag and your frame, as all frames are different sizes this has been designed to be universal - see photo
£6.00
Ford Replacement Door Sill Plates
For nearly 10 years, CEUK have offered illuminated door sills, in various colours and styles! But we had a thought, what about those customers who want a fancy sill plate to greet them on entry to their vehicle, but arent necessarily bothered about it lighting up? And up we came with this! Made from a Dual layer premium Acrylic, our door sills are built on a 2mm acrlyic backing plate with a 3mm face plate in any colour of your choice! Then, you can choose your design and design colours accordingly! These are supplied as pairs and come fully built up ready to install using the 3m Tape already affixed to the underside! Simply clean the area, remove the backing tape and stick in place - away you go! These are truly universal and will fit any 3 or 5 door vehicle! Please note, they do not light up! Build your own: The base plate is always GLOSS BLACK - this can not be seen! Face Plate: This is the colour of the sill that you will see (Black in our images, Matte Black is recommended) Accent Colour: This is the design at either side of the logo - EG the lines Logo Colour: The colour you want of the logo in the centre! Measurements: 50cm Sill 60cm Sill CM MM Width: 50cm Width: 500mm Width: 60cm Width: 600mm Height: 5cm Height: 50mm Height: 5cm Height: 50mm Thickness: 0.5cm Thickness: 5mm Thickness: 0.5cm Thickness: 5mm Customisation: Want something totally custom and unique to you? Drop us an email at support@ceuk.org with your ideas, and we'd love to offer you a quote! ETA This product being fully customisable to your tastes is made to order and the lead time may be a couple of working days during busy times!
£25.00 - £30.00
CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Estate)
CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). ESTATE ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus ESTATE Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 2 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!
£12.00
MK4 Focus - OEM Style Footwell Light Unit Upgrade
An enhanced Edition treat in the form of our ridiculously bright footwell upgrade for the MK4 Focus - Now as a full complete replacement unit. Unit is for NONE COLOUR CHANGING footwell lights only - This will NOT work with cars that have colour changing footwell lights! What have we done? Not only have we taken the OEM chip board which features just a measly 1 LED chip and added an additional 11 - giving you a total of 12 SMD's. We've gone further! The OEM housing is frosted, giving a diffused look and output. This has been done by Ford to mask the poor performance of a single LED chip - and allow the light to be dispursed around the area rather than directional; This also dulls the light output by about 30% Clearest Unit Ever! Our brand new unit is 100% Clear, which stops the dulling affect of the output; When you couple this with 12x more LED's than standard, well the numbers speak from themselves! This is a totally brand new pioneering product designed & created by our Enhanced Edition team in the UK! We believe Every single MK4 has the wiring for the Footwell lights (The ST has Footwell lights and we have found wiring In all lower spec MK4 Focus during testing) - under your Footwell there will be a hole - the wiring should be inside this hole, often clipped up behind the streering wheel panel.! A powerful 12SMD Led board (OEM Unit has 1smd) available in 4 colours - which adds both ambience and brilliance to your interior When do they work? 1: when you open the door of your vehicle 2: when you switch the engine off after a drive 3: when your Engine is switched on (giving interior Ambience during drives) The lights Mimic your ambient lighting, and will come on when the doors are opened, or the headlights are switched on! have you been #Enhanced Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Please Note - Green & Orange is not currently available in the oem style unit! WATCH THE LAUNCH VIDEO
£20.00£18.00
ST Logo Replacement (Small)
Small ST logo Designed to work with our Cup Holders and Fog Guards which have a section for the ST logo to be placed supplied with a 3M backing in many colours. Sold as Singles
£1.00
CEUK Rear Bumper reflector Guards - MK4 & MK4.5 Focus (All Models - Hatchback)
CEUK Rear Reflector Guards for the MK4 and MK4.5 Focus (all models). HATCHBACK ONLY Fits all models of the MK4 and MK4.5 2017-2024 Focus Hatchback Protect your rear reflector whilst adding some style at the same time! Cut from Premium 2mm Acrylic these don't just protect, but #Enhance Available in Premium Gloss Black 4 different designs to choose from Cut from Premium 2mm Acrylic Solid 3M Adhesive installation - will not fall off! Perfect Fit Designed & Manufactured in CEUK HQ West Yorkshire The design is cut into the guard so the reflector shows through - should you wish to have a coloured ST logo insert for your guards these are sold separately here Instructions are provided however they are self explanatory - remove the backing paper to expose the weatherproof 3M adhesive and hold firmly in place for upto 30 seconds whilst it affixes! Why? They just look cool!! Whats in the Kit: 2x Fog Guards (Left & Right) Double Sided Weatherproof Tape (Already applied) Instructions Please ensure you have some Isopropanol Alcohol or an Alcohol wipe to clean the area before application!
£12.00
![Performance - Ford Focus MK4 (2018-Present)](http://www.carenhancementsuk.co.uk/cdn/shop/collections/mk4_focus_st.jpg?v=1725609361&width=640)