Performance - Hyundai i30 (PD) 2017 - Present

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

AIRTEC Motorsport Induction Kit for Hyundai i30N Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our new induction kit aimed at modified Hyundai i30N owners who want to improve the performance of their car with a simple, bolt on modification for track or fast road use. AIRTEC part number: ATIKHYU1 TECHNICAL DATA AIRTEC Motorsport Induction Kit for Hyundai i30N Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our new induction kit aimed at modified Hyundai i30N owners who want to improve the performance of their car with a simple, bolt on modification for track or fast road use. This freer-flowing induction kit replaces the car’s original and restrictive air box and plastic intake set up. It features a large, cotton AIRTEC filter that is protected from warm air within the engine bay by a laser cut heat-shield. A replacement intake pipe in alloy is included, as well as silicone hose connectors to complete the package. The larger filter significantly improves the car’s breathing by increasing the amount of cold air it can take in and therefore increases power, performance and sound, thanks to a louder induction note. It fits neatly in place of the original air box to further improve the look of the engine bay and comes with all fixtures and fittings for a direct, bolt-on installation. Its improved air flow and straight forward fitment makes it an essential modification for all modified Hyundai i30N. Key features: Improved air flow for power and performance increases AIRTEC performance air filter Laser cut heat shield Alloy intake pipe Silicone hose connectors Full fitting instructions Available in Pro-Series Black Finish AIRTEC part number: ATIKHYU1

Read more less

AIRTEC Motorsport Oil Cooler Kit for Hyundai i30N Following an extensive development process over the past year, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified i30N owners who struggle to maintain steady oil temperatures on track, or during fast road use. AIRTEC part no: ATMSHYU1 TECHNICAL DATA AIRTEC Motorsport Oil Cooler Kit for Hyundai i30N Following an extensive development process over the past year, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified i30N owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to integrate a large capacity, external oil cooler mounted neatly behind the grille for direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversable if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powdercoated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. Its cooling efficiency and easy fitment makes it an essential modification for all modified i30Ns. Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powdercoated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right numbers: 6093141 & 6094142 AIRTEC part no: ATMSHYU1

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

AIRTEC Motorsport front mount intercooler upgrade for the Hyundai I30N. This freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. It features a stepped twin-core (130mm and 40mm) design for maximum frontal area in the limited space provided behind the bumper. Together with high-flow, moulded one-piece cast end tanks, the AIRTEC intercooler offers much greater efficiency and volume over standard. With a 70mm cold side, this makes the AIRTEC intercooler the largest on the market currently for the Hyundai I30N! Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures, mew Pro-Hoses silicone hoses and should take around 2-3 hours to complete. The intercooler is available in Pro-Series Black finish and either with or without the AIRTEC logo and Gloss Black Pro silicone hoses. Approx. dimensions:– 160mm deep bottom core and 70mm deep top core– 195mm high– 610mm wide Intercooler test data: Features:Stepped intercooler design for maximum flowDesigned and manufactured in the UK by AIRTECAIRTEC CAD designed cast end tanks for improved airflow and unbeatable strengthReduced charge temps3-year unlimited mileage warrantyAvailable in Pro-Series black finishAIRTEC logo available at no extra chargeUnbeatable value for money! Choose from plain black, or add your choice of coloured AIRTEC logo free of charge. Please note: Only available in Pro-Series black. AIRTEC Part No: ATINTHYU1 Registered Design Right number: Pending

Read more less

Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our new OEM+ large bore intake kit aimed at modified Hyundai i30N owners. Get impressive performance increases without compromising on the factory look of your engine bay. Improve the performance of their car with a simple, bolt on modification for track or fast road use, whilst retaining the stock airbox, replacing any restrictive components with our OEM+ intake kit. This freer-flowing kit replaces the car’s original and restrictive plastic intake pipes. It features our high quality Pro Hoses silicone hoses finished in gloss black, AIRTEC aluminium intake pipe, AIRTEC turbo elbow with CNC joiner. The OEM+ Intake system significantly improves the car’s breathing by increasing the amount of cold air it can take in and therefore increases power, performance and sound, thanks to a louder induction note. Designed to improve the look of the engine bay, this kit comes with all fixtures and fittings for a direct, bolt-on installation. Its improved air flow and straight forward fitment makes it an essential modification for all modified Hyundai i30N. Key features: OEM+ look Improved throttle response Improved air flow for power and performance increases Aluminium intake pipe Silicone hose connectors Full fitting instructions AIRTEC Part No: ATIKHYU4

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER48 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER48

Read more less

 AIRTEC Motorsport De-Cat Downpipe for Hyundai I30N By removing the original restrictive catalytic converter located within the factory OEM downpipe, back pressure is hugely reduced, which in return means faster response, increased power and a more aggressive exhaust note. Supplied with an adaptor to marry up to the original exhaust system, it also fits aftermarket systems, making it the a perfect solution to replace the OEM downpipe. One of the only manufacturers that offer a cast elbow to retain diameter! Features: Made from stainless steel AIRTEC laser cut plaque Smooth bends to ensure increased flow Fits original and aftermarket exhaust systems Improved performance further enhanced with remap Will fit both GPF / Non-GPF models. Please note: De-cats are sold for motorsport and off road use only and will not pass a UK MOT test or police road side checks.

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our intercooler upgrade for the facelifted (2021 onwards) i30N suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. Our solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a stepped twin-core design l with increased depth. This offers an increase in overall capacity in comparison to the original intercooler, as well as a substantial increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. With a 70mm cold side, this makes the AIRTEC Motorsport intercooler the largest on the market currently for the Hyundai i30N! Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures, new Pro Hoses silicone hoses and should take around 2-3 hours to complete. The intercooler is available in Pro-Series Black finish and either with or without the AIRTEC Motorsport logo and Gloss Black Pro silicone hoses.   Intercooler test data: Features: Stepped intercooler design for maximum flow Designed and manufactured in the UK by AIRTEC AIRTEC CAD designed cast end tanks for improved airflow and unbeatable strength Reduced charge temps Designed to fit both DCT and manual gearbox models 3-year unlimited mileage warranty Available in Pro-Series black finish AIRTEC logo available at no extra charge Unbeatable value for money! Choose from plain black, or add your choice of coloured AIRTEC logo free of charge. Please note: Only available in Pro-Series black. Registered Design Right number: Pending

Read more less

AIRTEC Motorsport Oil Catch Can Kit for Hyundai i30N Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves. Designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it. Supplied with step-by-step instructions giving this an easy DIY install, taking less than 30 minutes to fit. Features: Baffled oil catch can Oil level dipstick Three Pro Hoses silicone hoses Step-by-step fitting guide Billet fitting brackets Helps reduce carbon build-up on intake valves Will fit with standard or AIRTEC Motorsport i30N Header Tank Registered Design Right number: 6082523

Read more less

Designed to replace the restrictive OEM pipe, this 10mm larger silicone elbow and alloy connector offers increased flow. By reducing restriction within the induction system, air flow improves and potential power increases can be released. The elbow is carefully engineered to be a direct replacement item, which ensures a simple installation process and comes with a gloss black Pro Hoses silicone hose, as well as all fixtures and fittings. Please note: fits PRE-FACELIFT (2017 to 2021) Features: 10mm larger internal diameter than stock Improved air flow for increased power CNC machined Simple DIY installation Direct replacement Enhanced sound Pro Hoses silicone connector Registered Design Right number: 6093143 AIRTEC part no: ATIKHYU2

Read more less

Comes standard with new high pressure blue header tank cap! No Drilling required, uses original fixing points and is a direct replacement for the original plastic header tank. This is the ultimate water header tank. AIRTEC part no: ATMSHYU2 TECHNICAL DATA Hyundai I30N Lightweight Alloy Water Header Tank replacement. Easy fit takes 20 to 30 minutes to fit, Comes with a brand New High Pressure blue header tank cap No Drilling required, uses original fixing points and is a direct replacement for the original plastic header tank. Why not cover up that plastic cap with a Polished stainless steel cap cover, finished in satin Black and engraved Hot Logo, grooved inside for that perfect fit. Registered Design Right number: 6082522 AIRTEC part no: ATMSHYU2

Read more less

Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N. Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow.   TECHNICAL DATA Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N. Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow. On the hot side, from the turbo to the intercooler, the pipework features a 63mm diameter and on the cold side, from the intercooler to the throttle body, it increases to 70mm to further reduce restriction. The cold side is also a direct fit and match to own upgraded AIRTEC Motorsport intercooler’s outlet size, but can be used on standard intercoolers too. Both pipes are designed to directly replace the OEM boost pipes and come supplied complete with Pro Hoses silicone hose connectors and all required jubilee clips and fittings. AIRTEC part no: ATMSHYU5

Read more less