FREE SHIPPING ON ALL EXHAUSTS (UK Mainland Only)
TrustPilot Rating 4.6 ★★★★☆ - EXCELLENT - Read our 840+ Reviews

CloseClose
CloseClose
Close

Performance - Hyundai Kona MK1 (2017-2023)

6 products

Alphabetically, A-Z

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
    • Eventuri Air Filter Cleaning Kit - Car Enhancements UK

      Eventuri Eventuri Air Filter Cleaning Kit

      Filters are recommended to be cleaned every 5000Km with either compressed air or with this cleaning kit. Special Notes:WE CANNOT SHIP THIS ITEM OUTSIDE OF THE UK DUE TO LIMITATIONS ON SHIPPING LIQUID CHEMICALS AND AEROSOLS

      £30.00

    • Gold Heat Resistant Wrap - Car Enhancements UK

      forge Motorsport Forge Motorsport - Gold Heat Resistant Wrap

      State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

      £27.51

    • Forge Motorsport - Induction Kit for Hyundai i30N, Veloster N & KONA N

      forge Motorsport Forge Motorsport - Induction Kit for Hyundai i30N, Veloster N & KONA N

      Forge Motorsport are excited to release our industry leading intake for the Hyundai i30N. This aftermarket cold air intake system improves your i30N’s airflow in several key ways. It routes the air more directly into your engine, using a huge 102 mm diameter CNC mandrel bent alloy pipe. The aftermarket system also improves the airflow by adding a high-flow, high efficiency air filter in place of the more restrictive factory air filter. Finally, the cold air intake system is set up to allow cooler air to easily flow into your engine FITS: HyundaiElantraN 2022-i30NMk3 2018-2020 (Including Fastback)Mk3.5 2021- FaceliftKonaNVelosterN 2019-2020 T-6DIN 2021- (Facelift) The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the Hyundai’s 2.0 four pot engine. As always filtration is important when developing an intake, so we once again turned to the industry leaders and Forge long term filtration partners Pipercross. With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided flows 60% more air than the stock filter. The intake is finished off with our unique black thermal powder coating. This kit comes with Forge’s usual detailed fitting guide to help make installation as easy as possible. Hyundai boast figures of 275bhp and 278lb.ft on their standard vehicle. When we ran our CAT backed performance exhaust development vehicle on the dyno with this intake it reached figures of 296bhp and 310lb.ft! Interestingly there has been lots of divided opinions about our intake requiring a heat shield. Testing took place with the bonnet shut and replicated wind speeds of around 70MPH. Intake temperatures were logged and monitored along with thermal images taken,. During this testing, we did not see the inlet pipe or intake temperatures rise; even after 4 hard pulls, the inlet temperatures stayed at a steady 30°C. Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The Gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge Motorsport product. In the Box:1 x Black Alloy Hard Pipe1 x Pipercross Filter1 x Valve Silicon Joiner2 x Hose clamps Please watch our video on how to fit an air filter without damaging it.   This interactive image was created with ThingLink.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

      £367.20 - £392.22

    • Pipercross Carbon Air Filter Canister with 76mm O/D Inlet/Outlets - Car Enhancements UK

      forge Motorsport Forge Motorsport - Pipercross Carbon Air Filter Canister with 76mm O/D Inlet/Outlets

      Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

      £91.94

    • Hyundai i30N MK3.5 Facelift & Kona N Turbo Inlet Adaptor - Forge Motorsport - Car Enhancements UK

      forge Motorsport Hyundai i30N MK3.5 Facelift & Kona N Turbo Inlet Adaptor - Forge Motorsport

      Product Description THIS WILL ONLY FIT 4" INTAKES - THIS WILL NOT FIT THE STOCK AIRBOX. THIS WILL ONLY FIT THE MK3.5 FACELIFT I30N With Forge leading the way in aftermarket products for the new Hyundai’s, we are proud to present our turbo inlet adaptor for the MK3.5 i30N. After investigation we found the new turbo to be larger on the latest MK3.5 I30N giving even more reason to have this superb product as the newly refreshed design needs to flow even more air than its predecessor. After stage one or two tunes the performance yields are even greater than the previous model with even better driving response and improved higher end BHP gains. Redesigned and developed by our highly skilled team on Solidworks CAD system the all billet turbo adaptor and high flow silicone inlet pipe is proven to benefit the engines performance. With one of the weak links on the i30N and intake system being the restrictive aluminium inlet pipe we found something more was needed on stage 1 and 2 tuned vehicles. You cannot go wrong with Forge Motorsport hardware on your tuned Hyundai, the results speak for themselves. Mated to our 4” intake and high performance filter (FMINDK28) the gain from the turbo adaptor alone was 10BHP, and, along with a gain in torque, it really transforms your driving experience. The power can be felt from just above 3000 RPM and helps keep a hard consistent pull all the way to the rev limiter.             Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air to be compressed due to its larger capacity. Testing was completed on a Maha independent dyno, manufactured by the same people who currently supply BMW M sport and Mercedes Benz for all of their engine calibration and dyno testing. The Forge turbo inlet adaptor and high flow inlet pipe has a capacity of more than 150% over the stock item. Not only will you notice the increased performance, but also a slight change in your engine acoustics can be heard. As with all Forge motorsport products we offer a no quibble lifetime guarantee on both the silicone hose and billet adaptor. Will this fit other intakes? The answer is yes, it will fit other manufacturers intakes that have an inlet pipe of 102mm (4”). This will not fit the OEM. This is a simple installation and a modification that releases even more power from the Hyundai`s motor and fitting takes typically around 45 minutes and includes a full set of comprehensive installation instructions. Manufactured from 6082 aerospace grade aluminium Black anodised for ultimate protection and durability Increased capacity of over 150% No engine check lights (EML) Perfect fit with our induction kit Increased air flow Hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. Made in the UK Lifetime warranty

      £142.79

    • Racingline Filter Oil & Cleaning Kit – VWR120000 - Car Enhancements UK

      Racingline Racingline Filter Oil & Cleaning Kit – VWR120000

      Racingline Filter Oil & Cleaning Kit The Racingline Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. Instructions are provided for cleaning and maintenance. It’s a simple process, but please take time to read through, or ensure that your technician reads them, before you begin. We would suggest that you keep these notes with your car for future maintenance/owners. We recommend that the filter element is cleaned and reoiled every 10,000 miles/16,000 km, and/or a visual inspection at least every 12 months. This is a simple procedure, and will ensure that your filter continues to deliver the power improvements over a standard car. If your car is regularly used in a dry/dusty environment, we advise that you clean and re-oil your filter more regularly If you don’t clean your filter at the above intervals, no loss of filtration will occur, and your engine will still be fully protected. However, the performance advantages from the additional air flow of a clean filter will be lost. You will also shorten the life of the filter element. REPLACEMENT FILTER Like all the other filters on your car, it’s worth replacing the air filter element itself periodically. Rather than cleaning and re-oiling, lots of customers prefer to simply replace their filter element for what is a relatively low cost. We recommend replacement after 2 years for optimum performance. Of course, the filter will last for a longer period of time with correct maintenance and inspection for condition of foam as laid out below. BUY REPLACEMENT FILTER Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120000

      £28.82

    Close
    Chat with us