Performance - Seat Leon MK3 (5F) (2013-2020)

AIRTEC Motorsport are proud to introduce the front mount intercooler upgrade for the VAG MQB EA888.3 platform. This freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Fits the following vehicles: Volkswagen Golf Mk7/7.5 R - 2.0 TSI Volkswagen Golf Mk7/7.5 GTI incl. Clubsport and Clubsport S - 2.0 TSI Seat Leon Cupra 265/280/300 - 2.0 TSI (Now fits 2018 on wards!). Seat Leon - 1.9/2.0 TSI Audi S3 8V (Hatchback and Saloon variants) - 2.0 TSI Audi TTS 8S - 2.0 TSI Audi TT 8S - 1.8/2.0 TSI Audi A3 8V - 1.8/2.0 TSI Skoda Octavia vRS - 2.0 TSI Featuring a 60mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original hoses. As with all AIRTEC products, the intercooler was tested back-to-back on the dyno aginist the OEM item. This showed a huge reduction in air charge temperatures over standard. Our test car was fitted with a Cobra cat-back exhaust system and running Revo Stage 1 software. Stock intercooler temps reduce to an average of 64 degrees and peak at 68 degrees (after 5 back-to-back runs). On the Stage 1 Revo software, the car struggled to produce a peak power increase of 40bhp, due to the restrictive and inefficient OEM VW intercooler being unable to cool the intake temperatures effectively. With the AIRTEC intercooler fitted, the IAT saw a huge drop of 120 degrees, keeping temps much closer to ambient temperature and proving to be more reliable run after run. This gave a huge increase in performance, shown by the dyno test results below. Test results taken @ AmD Rolling road: Before AIRTEC intercooler was fitted, the car made 336.1bhp & 350.9 lb/ft of torque After the intercooler was fitted it made a very impressive 371.8bhp & 352.9 lb/ft Standard intercooler: Run 1 - IN 115 degrees, OUT 44 degrees Run 2 - IN 117 degrees, OUT 48 degrees Run 3 - IN 118 degrees, OUT 52 degrees AIRTEC intercooler: Run 1 - IN 116 degrees, OUT 18 degrees Run 2 - IN 117 degrees, OUT 20 degrees All research, design and development carried out at AIRTEC HQ in the UK, by our team of top fabricators and engineers. Extensive UK track days and multiple trips to the Nurburgring complete our well rounded development and testing programme. We strive to put all of our products through a gruelling test so we can focus on ensuring they are nothing but the very best quality, delivering you the best performance on the road and the track. Intercooler dimensions: Core thickness: 60mm Height: 418mm Intercooler width: 860mm Part no: ATINTVAG12

Read more less

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

2.0 TSIOil management system& catch can for 2.0 TSI EA888.3 If you're going to take your MQB car on track, you really need our 2.0 TSI Oil Catch Can Oil Management Kit. Without it, you'll risk oil starvation.Simple as that. How doesit work? Not all catch tank kits are equal. Designed with a built in engine baffle plate, our system is uniquely designed to aid engine oil control, as well as catching unwanted oil and water vapour. The 2.0 TSI EA888.3 retains oil in the engine under excessive braking G-forces. Oil pools at the front of the engine, leading to smoke clouds and ultimately oil starvation.  3 way baffled catch tank to effectively  collect excess moisture and oil vapour. Keeps your intercooler and inlet tracts clear of oil build-up and provides clean airflow through the inlet manifold. DIRECT PCV REPLACEMENT Our catch tank kit is supplied complete with a replacement PCV plate offering easy installation. 210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.   SUPERIOR BAFFLE SYSTEM A built in baffle plate prevents oil surging to the cylinder head and making its way into the intake - or worse, starving the engine. CATCH TANK Not just a tank, but a three way inner division ensures separation of moisture and oil.  PRECISION MACHINED Precision machined components utilising the latest 5 Axis CNC machines. POLISHED SWIVEL FITTINGS Racingline fittings are all hand polished before anodising for the ultimate finish and limits the chances of "spanner rash" PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC technology. AN-10 male fitting for main breather line. Removable baffle plate for easy maintenance Sealing gasket against the PCV replacement plate. CONFIRMED APPLICATIONS VWR13G700 > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ * For 2019 Golf GTI only a new evaporation canister which obstructs the catch can fitment. ​ You will need to purchase Volkswagen part 5Q0133366K to allow fitment

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

SUPPLIED WITH BLACK PIPEWORK AND BLACK SILICONE AIRTEC Motorsport big boost pipe kit for the MQB EA888 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving flow. Registered Design Right number: 6046416 Please note: designed to fit onto original OEM size intercooler outlets AIRTEC part no: ATMSVAG4 TECHNICAL DATA AIRTEC Motorsport big boost pipe kit for the MQB EA888.3 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving air flow. With larger internal diameters on the pipework, less restriction means a smoother air flow and an increase of power. Kit comprises of smooth larger, mandrel bent hard pipes and is supplied with a full set of Pro Hoses silicone hoses including from the turbo outlet to the hot-side boost pipe. The AIRTEC big boost pipe kit is designed as a direct replacement of the OEM parts, eliminating restrictions found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance in the process. We have designed the kit using 63mm hot-side pipework to keep air speed high and reduce the effects of turbo lag on big power cars. For the cold-side pipework this increases to a massive 70mm to ensure maximum air flow and volume is achieved at the throttle body to maximise performance. PLEASE NOTE: Intercooler NOT included, big boost pipe kit ONLY. Also supplied with new stainless steel jubilee clips. Fits the following vehicles: Volkswagen Golf Mk7/7.5 R – 2.0 TSI Volkswagen Golf Mk7/7.5 GTI incl. Clubsport and Clubsport S – 2.0 TSI Seat Leon Cupra 265/280/290/300 – 2.0 TSI Seat Leon – 1.8/1.9/2.0 TSI Audi S3 8V (Hatchback and Saloon variants) – 2.0 TSI Audi TTS 8S – 2.0 TSI Audi TT 8S – 1.8/2.0 TSI Audi A3 8V – 1.8/2.0 TSI Audi S3 8V 2.0 TSI Audi TT/TTS 2.0 TSI Skoda Octavia vRS 1.8/2.0 TSI VW Golf MK7 / All road / Sportwagenn 1.8/2.0 TSI VW Golf GTi/R 2.0 TSI Please note: designed to fit onto original OEM size intercooler outlets Registered Design Right number: 6046416 AIRTEC part no: ATMSVAG4

Read more less

Only The Driven know that the cooler the air, the more power produced. Revo Intercoolers drastically improve your vehicles ability to cool air compressed by the turbo. Increased volume and surface area, bar and plate cores with end tanks specifically designed to promote even airflow all play a part in lowering temperatures; without negatively affecting pressure. REVO AIR INTERCOOLER MQB 1.8/2.0 TSI EA888 GEN3 The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 36ºC vs. the MQB Golf R intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks OEM Fitment Up to 51% Increased Core Volume Over 36ºC Lower AIT INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle. END TANK DESIGN The stock end tanks are inefficiently designed and create turbulent air in corners. These sections create a natural flow distribution but slow charge air and increase pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR AND PLATE CORE Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient air flow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.   SILICONE HOSES Supplied with stronger oil resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework. The internal diameter of each silicone is precisely matched to the outer diameter of the ribbed inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.   BRACKETS To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout of the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM Intercooler with Revo Stage 2 software, a Revo air intake system and Milltek downpipe, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA Golf GTI with Revo Stage 2 Software, Golf R intercooler and Carbon Series Front Scoop Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM Golf R intercooler is highlighted. With max gains of +10 HP & +20NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing just 2% peak power over the 5 runs compared to 5% on the stock cooler. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo MQB Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were hotter on the Revo Intercooler, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency. OUTLET TEMPERETURE This graph illustrates the increased cooling performance of the Revo intercooler vs OEM Golf R intercooler over all five runs. The Revo Intercooler keeps temperatures below 49ºC on the fifth run, lower than the stock on its first at 58ºC.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 1.8 / 2.0TSI 2012 > Audi S3 8V 2.0TSI 2012 > Audi TT / TTS 2.0TSI 2015 > Seat Leon 1.8 / 2.0TSI 2013 > Skoda Octavia 1.8 / 2.0TSI 2013 > Skoda Superb 1.8 / 2.0TSI 2015 > VW Golf Mk7 / Alltrack / Sportwagen 1.8 / 2.0TSI 2013 > VW Golf Mk7 GTI / R 2.0TSI 2014 > VW Passat 1.8 / 2.0TSI 2015 > VW Tiguan 2.0TSI 2016 > VW Touran 2.0TSI 2016 > DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo MQB Golf / Octavia / Leon Intercooler Instructions FITTING INSTRUCTIONS Download the Revo MQB A3 / S3 Intercooler Instructions NOTES Simple replacement of the OEM part Also available for the Golf Mk5/6 MLB Platform Will not fit on cars with O2 sensors fitted without interference on the sensor. It is recommended to speak with your dealer before if you are unsure.

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     CARBON SERIESAIR INTAKE SYSTEM Beautifully crafted from the highest quality 3k carbon, the Revo Carbon Series is much more than a visual enhancement. Designed to directly replace restrictive OEM components, the Carbon Series has performance woven into the core of every product. IncreasedDiameter DirectInternals ThermalBarrier Learn more about this product OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Air Intake Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedFlow DirectReplacement IncreasedDiameter Learn more about this product     PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More TCU SOFTWARE Revo Transmission Control Unit Software allows your automatic gearbox to work in harmony with Revo ECU Software. As well as enhanced driveability and quick shifts, Revo TCU Software is packed full of features. OptimisedShift Points DynamicLaunch Control GlobalDevelopment Programme Read More     INTERCOOLER PIPE UPGRADE KIT The Revo Intercooler Pipe Upgrade kit reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals Learn more about this product INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER300PS TORQUE380NM 0 - 60 MPH4.6S 100 - 200 KPH14.2S POWER400PS TORQUE550NM 0 - 60 MPH3.6S 100 - 200 KPH8.8S Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Audi S3 8V 2.0 TFSI 2014 - 2019 Audi TTS 8S 2.0 TFSI 2014 > SEAT Leon Cupra 5F 2.0 TSI 2014 - 2019 Skoda Superb 3V 2.0 TSI 2014 - 2019 VW Arteon 3H 2.0 TSI 2017 > VW Golf R Mk7 2.0 TSI 2014 - 2019 VW Golf GTI Clubsort Mk7 2.0 TSI 2016 - 2018 VW Golf GTI Clubsort S Mk7 2.0 TSI 2016 - 2017 Images shown are for illustration purposes only All software and features are ECU/TCU ID dependant. Upgrade pricing is for existing Revo ECU or/and TCU customers.  Terms and Conditions apply.  Exhaust Overrun is an seperate file option that can be choosen at point of software installation. Performance data is taken from 2016 VW Golf R Mk7 with DSG. Aftermarket downpipe required. Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer.

Read more less

A direct replacement for the standard part, Direnza radiators feature twin-core technology for optimised cooling capability. Constructed from aircraft grade aluminium (a material well-known for its excellent thermal conductivity), our radiators are the perfect addition to any car, including those driven hard on track. Designed and developed in-house by Direnza engineers, our radiators provide as much as 40% additional cooling capacity compared with standard radiator systems, their robust yet intricate design, and exceptional cooling performance a testament to our R&D processes. Direnza radiators are TIG-welded for additional strength and durability. TIG welding also provides a more precise finish than MIG welding, and reduces stress on the material at hand. Our radiators will enhance the appearance of any engine bay. Fitment VW Golf MK7 / MK8 2.0 R / TSI /2013+ models. Product Category Intercooler / Radiator Part Number DZRA093 Intercooler / Radiator - Core Height (mm) 430mm Intercooler / Radiator - Core Length (mm) 675mm Intercooler / Radiator - Core Width (mm) 40mm Intercooler / Radiator - Inlet Size (mm) 32 Push Fit Intercooler / Radiator - Outlet Size (mm) 32 Push Fit Intercooler / Radiator - Overall Height (mm) 450

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

2.0 TSI MQBPerformance Intercooler.Golf mk7/7.5 GTI/R, Audi S3, Leon Cupra, Octavia vRS & more. Delivering lovely cool intake air temperatures for your 2.0 TSI EA888 gen3 MQB car. Again and again and again. What doesit do? The factory intercooler on the MQB-platform cars has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3.  By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. This race-proven cooler really is essential for every stage of tuning on any high performance MQB-platform car. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed core using extra tall internal tubes for maximum boost flow. SOPHISTICATED CORE Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow. SMOOTH END TANKS Cast construction for minimal turbulence and restriction delivering maximum flow across the entire core depth. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Massive 56mm core depth of our 'Plate & Bar' system uses careful optimised fin design. Giant core dimensions of 694mm x 410mm x 56mm (27” x 16.14” x 2.2”) Don't confuse our 'Plate & Bar' construction with the cheaper and less-effective 'Tube & Fin' construction that most aftermarket intercoolers use. CONFIRMED APPLICATIONS Some trimming to the plastic front panel may required for fitment: > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

TECHNICAL DATA Following the success of the VAG EA888 Gen 3 intercooler upgrade, AIRTEC Motorsport have a full big boost pipe kit to further compliment those cars running 400 bhp+, in particular cars with turbo conversions. And now, it can be purchased as a complete bundle giving your car a comprehensive cooling package. Fits the following vehicles: Volkswagen Golf Mk7/7.5 R – 2.0 TSI Volkswagen Golf Mk7/7.5 GTI incl. Clubsport and Clubsport S – 2.0 TSI Seat Leon Cupra 265/280/290/300 – 2.0 TSI Seat Leon – 1.9/2.0 TSI Audi S3 8V (Hatchback and Saloon variants) – 2.0 TSI Audi TTS 8S – 2.0 TSI Audi TT 8S – 1.8/2.0 TSI Audi A3 8V – 1.8/2.0 TSI Skoda Octavia vRS – 2.0 TSI INTERCOOLER UPGRADE Featuring a 60mm core design together with high-flow cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original hoses. As with all AIRTEC products, the intercooler was tested back-to-back on the dyno against the OEM item. This showed a huge reduction in air charge temperatures over standard. Our test car was fitted with a Cobra cat-back exhaust system and running Revo Stage 1 software. Stock intercooler temps reduce to an average of 64 degrees and peak at 68 degrees (after 5 back-to-back runs). On the Stage 1 Revo software, the car struggled to produce a peak power increase of 40bhp, due to the restrictive and inefficient OEM VW intercooler being unable to cool the intake temperatures effectively. With the AIRTEC intercooler fitted, the IAT saw a huge drop of 120 degrees, keeping temps much closer to ambient temperature and proving to be more reliable run after run. This gave a huge increase in performance, shown by the dyno test results from AmD Tuning rolling road test day. BIG BOOST PIPE KIT AIRTEC Motorsport big boost pipe kit for the MQB EA888.3 platform. Designed to increase power and torque figures by replacing the standard restrictive boost pipes and improving air flow. With larger internal diameters on the pipework, less restriction means a smoother air flow and an increase of power. Kit comprises of smooth larger, mandrel bent hard pipes and is supplied with a full set of Pro Hoses silicone hoses including from the turbo outlet to the hot-side boost pipe. The AIRTEC big boost pipe kit is designed as a direct replacement of the OEM parts, eliminating restrictions found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance in the process. We have designed the kit using 63mm hot-side pipework to keep air speed high and reduce the effects of turbo lag on big power cars. For the cold-side pipework this increases to a massive 70mm to ensure maximum air flow and volume is achieved at the throttle body to maximise performance. Registered Design Right number: 6022635 and 6046416 AIRTEC part no: ATINTVAG32

Read more less

Upgraded Boost Hose Kit.For all VWG MQB 2.0 TSI EA888 gen.3 & 3B. Internally wired, stepped internals, reinforced silicone. The RacingLine Boost Hose Kit for 2.0 TSI MQB smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  What do they do? Welcome to the ultimate Boost Hose Kit for 2.0 & 1.8TSI MQB vehicles. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.   By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs Five piece kit: The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included - however you'll only need to fit four of them.  ​ The choice of which Turbo Outlet Pipe (4a & 4b) depends on whether your car is pre- or post-2017. It's really easy to choose which to use, as it's either long or short depending on what OEM pipe you remove meaning that (unlike other kits) you can't really get this wrong! 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4a. turbo outlet pre 2017 4b. turbo outlet after 2017 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance      INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.  CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

REVO INTERCOOLER PIPE UPGRADE MQB 2.0TSI EA888 GEN3 The Revo Intercooler Pipe Upgrade kit offers incredible power and torque increases by reducing charge system resistance and improving flow compared to the restrictive stock pipework. Designed for the MQB 1.8/2.0 TSI EA888 Gen3 Engine, this upgrade is available for multiple models including VW Golf, Audi TT, A3, S3, SEAT Leon, Skoda Superb and Octavia. Featuring larger internal diameters, fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. A multitude of design features and attention to detail that Only Revo offer means this a product that not only looks great but more importantly performs. Reinforced, oil-resistant silicone hoses, lightweight mandrel-bent aluminium pipework and flush fit joints to eliminate turbulence, the Revo Intercooler Pipe upgrade is designed to fit either the stock or Revo Intercooler. KEY FEATURES Increased internal diameter Smoother airflow Fits Revo and stock intercooler +27HP & 50NM Water Meth Bung INCREASED VOLUME Each part of the kit has been designed to increase the overall diameter and increase internal volume. Larger charge air volume in the system means reduced flow resistance, allowing the turbo to expend more energy on air compression and less energy overcoming restrictions; resulting in more power. CHARGE PIPE DESIGN The Revo charge pipe is a smooth mandrel-bent aluminium pipe, coupled with a custom tapered silicone hose to gradually transition to a larger diameter from the turbo outlet to the hard pipe. The charge pipe is designed to directly replace the OEM part utilising optimised pipe routing and a unique constant-diameter design. This eliminates restrictions, including dents found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance without compromising fitment.   THROTTLE PIPE DESIGN The Revo throttle pipe increases airflow by replacing the stock part with an increased diameter, mandrel-bent aluminium hard pipe and reinforced oil resistant silicone hose. The hose connection is ID-matched to promote laminar, uniform flow across the transition of parts, as well as being slightly longer for ease of installation.   ROBUST DESIGN Only Revo scrutinises every detail of the existing system to ensure a quality replacement product for your vehicle. Alongside impressive performance benefits, this kit has several OE mounting points for stock wiring and hoses, a water-methanol installation bung and is finished in black with a laser-etched Revo logo.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The benefits of the Revo intercooler pipe upgrade allows the turbo to run more efficiently, moving a larger volume of air and minimising turbulence. This increases power and torque, especially in the middle of the rev range as highlighted during controlled Dyno testing. PERFORMANCE DATA Fitted to a Skoda Octavia vRS (2.0 TSI EA888 Gen 3) fitted with the Revo IS38ETR Turbo and Performance Pack, the Revo intercooler pipe upgrade gave an impressive gain of more than +27HP and +50NM at 3600RPM when compared to the stock parts being fitted, with a constant gain throughout the rev range, most notably from 3500-5000 RPM.   FITMENT   VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 1.8 / 2.0TSI 2012 > Audi S3 8V 2.0TSI 2012 > Audi TT / TTS 2.0TSI 2015 > Seat Leon 1.8 / 2.0TSI 2013 > Skoda Octavia 1.8 / 2.0TSI 2013 > Skoda Superb 1.8 / 2.0TSI 2015 > VW Golf Mk7 / Allroad / Sportwagen 1.8 / 2.0TSI 2013 > VW Golf Mk7 GTI / R 2.0TSI 2014 > VW Passat 1.8 / 2.0TSI 2015 > VW Tiguan 2.0TSI 2016 > VW Touran 2.0TSI 2016 >   Notes: Simple replacement of the OEM part Designed to fit with the stock airbox or Revo intake(s). Third-party intakes may cause fitment issues.  Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

The Wagner Tuning Intercooler Kit made for the VAG MQB EA888 Gen 3 2.0TFSI This Wagner-Tuning Competition intercooler has the following core size 640mm x 410mm x 65mm and 17 litres charge air volume. The "Competition" Core offers high cooling performance and light weight (8.4KG).  Optimized in our CAD systems, the new competition-high-speed core and cast aluminium end tanks give this intercooler excellent cooling properties. Flow analyses and simulations were created to optimise the design for best possible internal airflow. This intercooler is the best choice when it comes to performance gains and low intake temperatures. Significantly reduced pressure drop than the OEM Intercooler. Anti Corrosion protective coating with perfect thermal heat dissipating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% perfect fit. Fitment is easy, replacing the OEM intercooler. All of our products undergo rigorous quality control.This Wagner Tuning VAG 1.8TSI - 2.0 TSI Competition Intercooler Kit is suitable for :-- Audi A3 8V 1,8TFSI - Audi S3 8V 2,0TFSI - Seat Leon 5F Cupra- Seat Leon 5F 1.8TSI- Skoda Octavia 5E 1.8TSI- Skoda Octavia 5E RS- VW Golf 7 GTI - VW Golf 7.5 GTI- VW Golf 7 R- VW Golf 7.5 RNOTES: - Not Suitable for Facelift S3 8V Models- Not Suitable for Facelift Leon Mk3 Models

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers: AudiA1A1 (8X) 2010-20181.4 TSI 2015 OnwardsA31.4 TSI/TFSI 2015 Onwards (8V)S32.0 TSI (8V Chassis)S4B9TTSMk3 8S 316bhp (late 2022-)CupraAteca(up to 2020)Formentor2.0 TSI (310 BHP)SeatIbizaMk4.5 (6P) 2015-20171.4 TSILeonMk3 2012-20201.4 TSI 125/140/150 BHP 2014-2019Cupra 280/290/300RSkodaSuperb280 4x4 DSGVolkswagenArteon(2017-2020)(2020-)GolfMK71.4 TSI 125BHP/138BHP/150BHPGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8RJettaMK6 (2010-2018)1.4 TSIMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLIPoloGTI 2.0 2018-2020 AW ChassisT6T6 (2015-2019)2.0 TSITiguan2.0 TSI 2017 OnwardsR 2022 Onwards (Gen 4) Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less