Performance - VW Golf MK5 (2003-2008)

The factory 2.0 TFSI air-box works efficiently on a standard vehicle. As power is increased through tuning, however, it quickly becomes a major restriction, reducing the additional power offered. Ensuring the engine can get access to enough air is paramount when increasing power, an open cone air-intake system is the most effective way of achieving this, but not all products are made equal. Having worked with a number of intake solutions during software development, we noticed a lack of high quality and more importantly, high flowing kits available. Working alongside some of the biggest names in the air filter industry, we engineered and designed what is still one of the highest flowing kits available. Pioneering design allows air to reach the turbo as quickly as possible whilst minimising turbulence and restriction. As a result, boost can be maintained for longer, giving you access to more power throughout the rev-range along with a more aggressive sound, and performance you can feel all the way to the redline. BENEFITS Increases power and torque Maintains boost for longer Single piece pipe 25% less restriction Three-layer foam filter Scaled MAF housing CamCoat option available INTAKE PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around a lightweight 90mm intake pipe, mandrel bent to maintain the internal diameter in the corners and to create a one-piece solution. This offers superior flow and avoids the air turbulence and resistance experienced on intake kits with multiple sections, usually caused at each join resulting in very turbulent airflow, ultimately restricting performance. MAF SCALING Ensuring correct MAF (Mass Air Flow) sensor scaling is the real art when it comes to designing air intake systems if incorrect the intake system can actually reduce power and cause major fuelling issues. The Revo kit integrates the stock MAF sensor in a specifically designed housing on the one-piece pipe to ensure correct scaling during fitment. THREE LAYER FOAM FILTER An intake system is only as good as the filter. This kit comes complete with a tried and tested Revo three-layer foam filter with an impressive 857cm² surface area, supported by galvanised, epoxy-coated mesh to ensure the filter cannot collapse. The filter has a large 180mm external diameter body and a smooth radius aluminium bell mouth, specifically designed for optimum airflow from the filter to pipe-work. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze, which are surface filters designed to trap particles on the outer layer, instantly causing restriction. Revo foam filters work by trapping dirt particles within each of the oiled foam layers, allowing air to negotiate its way through the filter, reducing restriction and offering much longer service intervals. We tested the filter at a leading motor testing centre ‘Mira’ on an industry recognised dust load test. On a full dust load test, the foam filter was found to still be 99.1% efficient, filtering down to 5 microns while offering the least amount of restriction over similar products. HEAT SHIELD The intake system features a laser-cut aluminium heat shield that ensures the filter is well insulated from ambient under-bonnet temperatures. The shielding is designed to utilise the ducting in the factory grill to maximise airflow and prevent heat-soak. SILICONE HOSE The silicone hoses included in the kit are manufactured using high-quality automotive grade silicone, engineered to combine the system using stepped necks to offer a smooth transition of air to avoid turbulence. The turbo inlet hose has also been specifically designed to fit both K03 and K04 turbo powered cars. TESTING 2.0 TFSI Intake Restriction  2.0 TFSI Stock vs Stage 1 Power Graph 2.0 TFSI Stock vs Stage 1 Power Graph   INTAKE PERFORMANCE FIGURES Engine Software Power Torque 2.0 TFSI (K03) Stage 1 + 16 BHP + 5 NM 2.0 TFSI (K04) Stage 2+ + 40 BHP + 15 NM   *Maximum power and torque increases are shown in testing when using Revo 2.0 TFSI intake system compared to a stock intake   TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the RT992M200700 Revo 2.0 TFSI Air Intake System Fitting Instructions     FITMENT      Manufacturer Model Engine Year Audi A3 (8P) 2.0 TFSI 2006 - 2012 Audi S3 (8P) 2.0 TFSI 2006 - 2012 Seat Leon MK2 2.0 TFSI 2005 - 2012 Seat Altea 2.0 TFSI 2006 - 2009 Skoda Octavia Mk2 2.0 TFSI 2005 - 2013 VW Golf MK5 2.0 TFSI 2003 - 2009 VW Golf MK6 (R, ED35) 2.0 TFSI 2008 - 2013 VW Scirocco R 2.0 TFSI 2008 > VW Jetta 2.0 TFSI 2006 - 2010 VW Passat 2.0 TFSI 2005 - 2010

Read more less

Mount Upgrade Kit OVERVIEW The Revo mount upgrade kit is designed to improve the driving experience of your vehicle. Power development on the EA888 2.0L engine quickly uncovered problems with severe engine movement. The fluid-damper design of the stock engine/transmission mounts and air gap design of the lower torque mount become overtaxed with increased power, numbing the driver of critical vehicle feedback and absorbing useable power. The Revo mount system includes replacement engine and transmission mount assemblies, as well as a replacement lower torque arm and lower bushing insert. Precision-machined aluminium/stainless steel parts and Powerflex polyurethane bushings manage the movement of uprated engines, transferring more energy to the wheels versus the OEM mounts. The polyurethane bushing design provides a more connected feeling for the driver during spirited drives, reducing engine movement and stiffening up the front of your vehicle. BENEFITS High strength, high-quality material construction Direct replacement kit Powerflex polyurethane bushings Reduced engine movement   DESIGN AND PRODUCTION   DIRECT REPLACEMENT Using 3D CAD modelling software, Revo engineers digitized each OEM mount for exact fitment. Several prototypes were evaluated to ensure factory alignment between the vehicle’s engine and chassis. Each Revo kit includes an assortment of brackets and spacers to securely mount any accessories previously fixtured to the stock units.   HIGH STRENGTH CONSTRUCTION 6061 T6 aluminium billet and 304 stainless steel round are used to manufacture the mount frames, while each bushing is moulded from top quality polyurethane by Powerflex. All manufacturing is controlled to a strict dimensional tolerance to guarantee each mount is identical to the prototypes tested. Custom length, Grade 10.9 bolts are supplied with each kit to match the strength & thread engagement of the factory units.     POWERFLEX BUSHINGS Powerflex utilises a unique formula of polyurethane, custom designed to ensure optimum fitment in the machined housings. After testing of various amounts of compliance, our engineers were able to fine-tune the final bush to achieve a balance between performance and comfort. Polyurethane is also resistant to oil, fuel unlike the rubber used in the OEM mount which can lead to perishing and failure. Our specified durometers provide a stiffer mount to limit the engine movement without compromising on NVH (Noise Vibration Harshness) levels in the process.   REVO MOUNTS   ENGINE MOUNT Several specific details set the Revo engine mount apart from similar kits. The engine mount bushings, mounting arm and base plate are all specifically sized to provide clearance to the engine block bracket. The mounting arm locator is machined to 0.30mm tolerance to provide engagement to the stock mounting bracket without any interference. Each kit includes a variety of brackets and spacers designed to provide new mounting points for every part previously mounted to the stock assembly. The Type II hard aluminium anodizing, powder coated steel parts and stainless steel non-critical hardware provide excellent corrosion protection while the Grade 10.9 steel bolts provide OE level strength.   TRANSMISSION MOUNT As with the engine mount, several specific details set the Revo transmission mount apart. The mount base plate is designed to incorporate the Revo bushings while providing clearance to the chassis frame rail. Several prototypes were used to adjust the overall height of the assembly, optimizing clearance to the wiring tray mounted above and frame rail below. The same Type II hard anodizing and custom length Grade 10.9 bolts provide OE level strength and corrosion resistance.      PENDULUM MOUNT Long-term prototype testing revealed several key elements integrated into the Revo pendulum mount. High durometer link bushings are used to keep but decrease compliance at the stock location, thereby reducing accelerated wear on the stock sub-frame mount while still reducing engine movement. Close manufacturing tolerances are held on the rear of the pendulum mount arm, ensuring perfect fitment into the stock sub-frame mount on every vehicle. Prototype testing revealed that even high-spec. hard anodizing succumb to the combination of heat/road debris over time and fades, leaving the bare aluminium exposed to the elements. As such, both exposed aluminium pieces are powder coated and stainless steel bolts used to ensure corrosion resistance.   TECHNICAL DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the RV551M500302 Revo Engine Mount Fitting Instructions FITTING INSTRUCTIONS Download the RV551M500402 Revo Transmission Fitting Instructions FITTING INSTRUCTIONS Download the RV551M500502 Revo Pendulum Fitting Instructions   FITTING  Engine / Transmission / Pendulum Mount Manufacturer Model Engine Year VW Golf Mk5 2.0 TFSI 2003 - 2009 VW Golf Mk6 2.0 TFSI / TSI 2008 - 2013 VW Jetta 2.0 TFSI 2005 - 2011 VW Beetle 2.0 TSI 2012 > VW EOS 2.0 TSI 2006 > VW Scirocco 2.0 TFSI / TSI 2008 > Audi A3 (8P) 2.0 TFSI 2003 - 2012 Audi S3 (8P) 2.0 TFSI 2006 - 2012 Audi TT / TTS (Pendulum Mount Doesnt fit this vehicle)  2.0 TFSI / TSI 2007 - 2014 Seat Leon 2.0 TFSI / TSI 2005 - 2011 Skoda Octavia 2.0 TFSI / TSI 2004 - 2013 Fitting Notes: Will Only fit vehicles with Manual 6 Speed and DSG Transmissions Performance Engines mounts will produce more vibrations at low RPM then softer OEM Mount Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8P) 1.6 / 1.9 / 2.0 TDI  2003 - 2012 Audi A3 (8P) 1.8 / 2.0 TFSI  2003 - 2012 Audi Q3 (8U) 2.0 TDI  2011 > Audi Q3 (8U) 2.0 TFSI  2011 > Audi TT (8J) 1.8 / 2.0 TFSI  2008 - 2014 Audi TT (8J) 2.0 TDI  2008 - 2014 Seat Alhambra 1.4 / 1.8 / 2.0 TSI  2010 > Seat Alhambra 2.0 TDI  2010 > Seat Altea 1.8 / 2.0 TFSI  2006 - 2015 Seat Altea  1.6 / 1.9 / 2.0 TDI  2004 - 2015 Seat Leon (Mk2) 2.0 TFSI  2009 - 2012 Seat Leon (Mk2) 1.6 / 1.9 / 2.0 TDI  2005 - 2012 Skoda Octavia (Mk2) 1.8 / 2.0 TSI  2005 - 2013 Skoda Octavia (Mk2) 1.6 / 1.9 / 2.0 TDI  2005 - 2013 Skoda Superb (Mk2) 2.0 TFSI  2008 - 2015 Skoda Superb (Mk2) 1.6 / 1.9 / 2.0  2008 - 2015 Skoda Yeti 1.8 TSI  2009 > Skoda Yeti 1.6 / 2.0 TDI  2009 > VW Beetle 1.4 / 2.0 TSI  2011 > VW Beetle 1.6 / 2.0 TDI  2011 > VW Caddy 1.6 / 2.0 TDI  2015 > VW Golf V (Mk5) 1.4 / 2.0 TSI  2005 - 2009 VW Golf V (Mk5) 1.9 / 2.0 TDI  2005 - 2009 VW Golf Vl (Mk6) 1.4 / 2.0 TSI  2008 - 2014 VW Golf Vl (Mk6) 1.6 / 2.0 TDI  2008 - 2014 VW Scirocco 1.4 / 2.0 TSI  2008 > VW Scirocco 2.0 TDI  2008 >  ** More applications. This Filter fits more applications, please cross-reference using the list above.   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi RS3 (8P)  2.5 TFSI  2011 - 2015 Audi RSQ3  2.5 TFSI  2013 > Audi A3 (8P)  3.2 V6  2003 - 2012 Audi RSQ3  2.5 TFSi  2013 > Audi TTS  2.0 TFSi  2008 - 2014 Audi TTRS  2.5 TFSi  2011 - 2014 Audi TT  3.2 V6  2006 2010 Skoda Superb  3.6 V6  2008 - 2015 VW CC  3.6 V6  2012 > VW EOS  3.2 / 3.6 V6  2006 - 2010 VW Golf R32  3.2 V6  2005 - 2009 VW Passat  3.6 V6  2010 - 2015 VW Passat  3.2 / 3.6 V6  2005 - 2010   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

REVO AIR INTERCOOLER 1.8/2.0 TFSI The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow thus decreasing turbulence and increasing airspeed into the bespoke bar and plate core. These features enhance charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures even compared to the Audi S3 (8P) cast aluminium intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks OEM Fitment 51% Increased Core Volume over a standard cooler 21% Increased Core Volume over an OE S3 cooler Lower Intake Temperatures INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has a much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle. END TANK DESIGN End tanks play an important part in managing pressure drop and work in harmony with the core to promote airflow, the stock ones are inefficiently designed and create turbulent air in corners. These sections create a naturally small cross-sectional flow area, slowing charge air and increasing pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core by removing these turbulent pocket areas found in the OE design. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR AND PLATE CORE Designed with a bar and plate core to maximise the efficiency of heat transfer and minimise flow resistance, the Revo Intercooler easily outperforms similar tube and fin alternatives in both aspects. The Revo Intercooler goes a step farther: featuring carefully specified fin sizing and geometry to further optimise the balance between air cooling and flow restriction. The ambient core side utilises shorter fins with specially designed louvres to slow ambient air passing through the core, which improves heat transfer. While the charge core side features an offset internal fin design to balance surface area and air resistance to aid cooling ability and minimise pressure drop.   SILICONE HOSES Supplied with stronger oil resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework (Coming soon). The internal diameter of each silicone is precisely matched to the inner diameter of the ribbed intercooler inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.   BRACKETS To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout of the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OE S3 (8P) intercooler with a Revo K04 Kit, Revo production KO4 software, a Revo air intake system and full Eurojet exhaust, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of it's enhanced cooling. PERFORMANCE DATA Golf GTI TSI EA888 Gen1 with Revo K04 upgrade, OE S3 (8P) intercooler and Revo open cone air intake system and full Eurojet exhaust. Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OE S3 intercooler is highlighted. With max gains of +8 HP & +11NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing no peak power over the 5 runs. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were equal between both coolers, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency advantage. OUTLET TEMPERETURE This graph illustrates the increased cooling performance of the Revo intercooler vs OEM S3 (8P) aluminium intercooler over all five runs. The Revo Intercooler keeps temperatures well below the OE S3 intercooler throughout all 5 runs.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 (8P) 1.8 / 2.0TFSI 2004-2013 Audi S3 (8P) 2.0 TFSI 2006-2012 Seat Altea 1.8 / 2.0 TFSI/TSI 2004-2010 Seat Leon (MK2) 1.8 / 2.0 TFSI/TSI 2004 - 2012 Seat Toledo 1.8 / 2.0 TFSI 2004 - 2009 Skoda Octavia (MK2) 1.8 / 2.0 TFSI/TSI 2004 - 2013 Skoda Superb (B6) 1.8 / 2.0 TSI 2008 - 2013 Skoda Yeti* 1.8 / 2.0 TSI 2010 - 2013 VW EOS 2.0TSI 2006 - 2016 VW Golf (Mk5/6) 1.8 / 2.0 TFSI/TSI 2004 - 2014 VW Jetta (Mk5) 1.8 / 2.0 TFSI 2006 - 2010 VW Scirocco 2.0 TFSI/TSI 2009 - 2014 VW Tiguan* 2.0TFSI 2007-2010 * Yeti / Tiguan fitment for FWD vehciles only. Does not fit AWD.  DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo TFSI Intercooler Instructions NOTES Simple replacement of the OEM part Also available for the MQB Platform

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000 Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8P)  2.0 TFSI  2003 - 2012 VW Golf MK5  2.0 TFSI  2004 - 209 VW Golf MK6  2.0 TFSI  2009 - 2014 VW Passat  2.0 TFSI  2006 - 2011 VW  Jetta  2.0 TFSI  2005 - 2011 Audi TT  2.0 TFSI  2007 - 2010 Audi  S3 (8P)  2.0 TFSI  2007 - 2013 Seat  Leon  2.0 TFSI  2005 - 2013 Seat  Altea  2.0 TFSI  2006 - 2010 Seat  Toledo  2.0 TFSI  2005 - 2009 Skoda  Octavia  2.0 TFSI  2005 - 2013 VW  Scirocco  2.0 TFSI  2009 - 2015 VW  EOS  2.0 TFSI  2006 - 2015   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALLIPERS Our lightweight six-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The calliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITTING      Manufacturer Model Engine Year Audi A3 (8P) All 2003-2012 Audi S3 (8P) 2.0 TFSI 2003-2012 Seat Leon MK2 All 2005-2012 Skoda Octavia Mk2  All 2004-2013 VW Golf MK5/6 All 2003-2012 VW Scirocco All 2003-2012   Notes: Recommended Revo Authorised Dealer Fitment only Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

Revo ProPanel FilterHigh-Performance Air Filters OVERVIEW The Revo ProPanel is a high-grade direct replacement filter for your vehicle. Designed as direct replacement filters to fit inside your factory airbox and are suitable for road or competition use.   BENEFITS Designed to increase horsepower and rate of acceleration Exceptional filtration High air flow with three layers of foam Lifetime warranty Cleanable (Every 10,000Miles or 12 Months) Works with original manufacturers airbox   DESIGN AND PERFORMANCE Why choose foam? Because, compared to paper or other filter technologies, reticulated polyester foam achieves optimum performance against three key criteria: Maximum airflow: the ability to allow air to pass through without causing a large pressure drop. Cleaning efficiency: the capability to arrest a high proportion of airborne dust while feeding the engine clean air. Dust load-up tolerance: the capability to absorb a large amount of dust without reducing air flow capacity. This design of filter has been used in all fields of motorsport from Formula 1 to the World Rally Championship. The range receives this same attention to detail at the design stage and is then taken into production with consummate quality.   THREE LAYER FOAM SYSTEM Revo ProPanel Filters use multi-layered foam technology to trap dust and dirt while maintaining flow efficiency over time. Using foam increases the filter's surface area and is washable, compared to standard paper and cotton filters which trap dust on the surface and become less efficient the more they are used, choking the engine and reducing performance. The outer core is a coarse foam designed to trap larger particles, the second layer is a medium foam designed to trap most particles and the inner core is fine foam which will trap any particles small enough to reach it. The triple layer foam design ensures an exceptional level of engine protection and long-term performance advantage.     1: Stainless steel wire mesh To avoid erosion, only the highest quality steel is used.   2: Course outer layer:  Stops large pieces of dirt and foreign matter from penetrating further. Straightens airflow into subsequent layers.   3: Medium grade middle layer:  This second filtration layer traps most of the harmful dirt that leads to engine damage.   4: Fine inner layer:  Extracts fine particles while allowing full airflow to the engine for maximum power.     ADVANTAGES OF A REVO PROPANEL FILTER Emissions legal in all 50 US states Will not void vehicle warranty Lifetime warranty (to the original purchaser with proof of purchase)     FITTING      Manufacturer Model Engine Year Audi A3 (8P)  1.2 TFSI  2009 > Audi A3 (8P)  1.4 TFSI  2007 > Seat Altea  1.2 TSI  2010 > Seat Altea  1.4 TSI  2007 > Seat Leon (Mk2)  1.2 TSi  2010 > Seat Leon (Mk2)  1.4 TSI  2007 > Seat Toledo (Mk3)  1.4 TSI  2007 > Skoda Octavia (Mk2)  1.2 TSI  2010 - 2013 Skoda Octavia (Mk2)  1.4 TSI  2008 - 2013 Skoda Superb (Mk2)  1.4 TSI  2008 > Skoda Yeti  1.2 TSI  2009 > Skoda Yeti  1.4 TSI  2010 > VW Beetle  1.2 TSI  2011 > VW Golf (Mk5)  1.4 TSI  2007 > VW Golf (Mk6)  1.2 / 1.4 TSI  2009 > VW Jetta (Mk3)  1.2 TSI  2007 - 2010 VW Jetta (Mk4)  1.2 / 1.4 TSI  2011 > VW Passat  1.4 TSI  2010 > VW Scirocco (Mk3)  1.4 TSI  2008 > VW Tiguan  1.4 TSI  2010 > VW Touran  1.2 TSI  2010 >   Notes: Simple replacement of the OEM part Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less