Performance - VW Golf MK7 (2012-2020)

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf R Mk7 performance exhaust is made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back), these parts replace the centre and rear sections. This non-resonated exhaust makes the system louder as it excludes the centre silencer and therefore, has a sportier exhaust note. This exhaust however, is also available as a resonated version (including centre silencer) which is a quieter option. All relevant fittings and gaskets are supplied. Please Note - This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swop from quieter to louder tones as before. Fitted images show the non-valved resonated version.   COBRA SPORT REVIEW   Cobra Sport have gained a fantastic reputation in the Japanese, Ford and Vauxhall exhaust markets over the years and hope to capitalise on this success by launching a more comprehensive selection of VAG products over the coming months to complement and expand their market reach. Therefore, they have now added the VW Golf R MK7 to the range. Matt Thomas, Sales Manager at Cobra Sport says “The Golf R MK7 exhaust system has completed the R&D program, and we have now collated the performance results. Having tested the resonated cat back exhaust system on the rolling road we saw an impressive +7.4bhp increase. This cat back system utilises the factory valve actuators/motors to give you a much quieter sound when running in eco mode, in this mode the system is barely louder than the standard system". Having driven both the resonated & non-resonated cat back system on a daily basis, I found the non-resonated to be slightly uncomfortable at motorway speeds, and slightly on the louder side for normal road use, although, nowadays I would class myself as the more mature driver. The Cobra Sport system really improves the drivability of this car and takes it to the next level". Independent rolling road testing of the Golf MK7 resonated turbo back system with sports cat front pipe and aftermarket air intake revealed a +40.76bhp (30.4KW) power increase measured at all 4 wheels with the Golf R putting an impressive 270.61bhp (201.8KW) through the rollers. This testing was undertaken by a dealer in Australia in temperatures of 29.3 degrees celsius and an air density of 93.6%. A substantial weight saving can also be achieved with the 3” turbo back system providing a whopping 35% decrease in weight from the Original Equipment version. The styling of the system is finished off with either quad 5” x 3” oval slash-cut tailpipes in stainless steel finish or the upgraded ceramic coated versions.

Read more less

Turbo Inlet Hose The Revo Turbo Inlet Hose has been designed and engineered to directly replace the stock pipe and elbow found in vehicles with the 1.8 and 2.0 TSI engines with an IHI turbo. The Revo Turbo Inlet Hose offers a high-quality single piece replacement for the OEM parts which allows for smoother uninterrupted air flow, improving the throttle response and performance of your vehicle. Key Features Increased performance Improves air flow efficiency Constant taper for smoother flow Turbo matched inlets Replaces restrictive stock turbo elbow Engineered for both LHD and RHD fitment OEM Part With ample efficiency for a stock vehicle, the OEM system quickly becomes a choking point for the engine when running Revo Software. With a generously sized air box, the standard plastic intake hose causes the most amount of restriction; convolutions designed to allow for engine movement disrupt airflow, a small internal diameter limits the volume of air and a sharp reduction in hose diameter at the turbo causes turbulence. Turbo Inlet The Revo machined inlet replaces the restrictive elbow found on the IS20/IS38 turbos. The machined billet aluminium inlet securely fits to the OE unit using locking tabs and integrated O-rings. With almost double the cross-sectional area compared to other available products, air can stabilise and distribute before a smooth tapered transition to the turbo. Removing the internal steps between components further ensures uninterrupted airflow and removes any unnecessary turbulence. Silicone Hose Design The Revo Turbo Hose as an increased inner diameter that gradually tapers from air box to turbo to optimise airflow, while maintaining the tolerances required to fit both LHD and RHD vehicles with a standard air box. Designed to directly replace the plastic hose and turbo elbow, this upgrade reduces restriction and maximises smooth airflow improving both power and torque throughout the rev range. A four-ply construction with an internal wire helix increases strength to prevent collapsing under pressure. Internal steps flush fit against the stock air box and the machined inlet, creating a smooth transition between components ensuring the smoothest airflow possible to the turbo. A machined bung is integrated in to the hose, connecting the stock PCV system vacuum. Research and Development All Revo products are designed in-house and are rigorously tested. The Revo Turbo Inlet Hose allows the Stock IS38 turbo to run more efficiently, intake a larger volume of air and minimise turbulence. This increases power and torque, especially at the top end of the rev range as highlighted during controlled Dyno testing. Graphs Data Up to 12WHP and 15NM gains Graphs produced with Revo stage 2 software on Audi S3 8V Stock Runs with complete OEM Air intake setup Revo Runs with Revo Intake Hose and ProPanel Filter Technical Documents The following documents are available to view: Fitting instructions Download the Revo Turbo Inlet Hose Fitting Instructions Vehicle Applications Audi A3 (8V) 1.8 / 2.0 TFSI 12 - Audi S3 (8V) 2.0 TFSI 12 - Audi TT (MK3) 2.0 TFSI 15 - Audi TTS (MK3) 2.0 TFSI 15 - Seat Leon (MK3) 1.8 / 2.0 TSI 12 - Skoda Octavia (MK3) 1.8 / 2.0 TFSI 12 - Skoda Superb 2.0 TSI 15 - Volkswagen Golf (MK7) R 2.0 TSI 12 - Volkswagen Golf (MK7) GTI 2.0 TSI 12 - Volkswagen Golf (MK7) 1.8 TSI 12 - * Fitments for 1.8 TSI & 2.0 TSI Engines with IHI IS20 and IS38 Turbos © Revo Technik

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This VW Golf R Mk7 performance exhaust is made in 3"/76.2mm bore pipework and fits from the turbo to the standard centre section. This sports cat exhaust will enable you to pass a UK MOT emissions test or police road side checks. All relevant fittings and gaskets are supplied. (Except turbo clamp).

Read more less

Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. REVO TCU SOFTWARE STAGE 1 | STOCK IS38 The DQ250 direct-shift is an electronically controlled dual-clutch gearbox that offers much faster gear changes. The dual clutch allows gears to change instantaneously without losing boost. Improved engine performance from Revo ECU Software means that the stock shift points do not give you the maximum potential that your car has to offer. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Only The Driven know that quicker gear changes and extended rev-ranges mean more exhilarating power, and as with all Revo Software, you won’t have to compromise on day-to-day driveability. DQ250 DSG GEARBOX Revo TCU Software offers improved response and optimised shift points but maintains the characteristics of Drive and Sports mode. Manual mode now gives you more control by disabling the automatic kick down feature, unlike drive mode where if you plant your foot the gears automatically kick down, allowing you to select the gear you want and make the most of the increased torque from Revo ECU software. Automatic upshift is still active all in modes to offer the best performance and safety for your engine, whilst Dynamic Launch Control allows you to launch at various RPM points depending on your throttle position, improving your 0-60mph times. The result of over two years of extensive development through our Global Development Programme. This Software has been tested in countries from South Africa, Brazil and America to Australia, South Korea, Russia and Germany giving us invaluable data from a wide variety of driving styles and conditions. This ensures the unrivalled quality and performance you demand. SOFTWARE FEATURES DYNAMIC LAUNCH CONTROL Variable RPM launch control via throttle position GLOBAL DEVELOPMENT PROGRAM Extensively tested through our development program OBD INSTALL Revo Software can be installed quickly and safely via the OBD Port   DEVELOPMENT Revo started Developing ECU software in 2014 for the GEN3 EA888 engines, and 12 months later started working on the MQB DSG software to match. Our own in-house Audi S3, VW Golf R and Skoda vRS spent countless hours in the hands of the calibration engineers, 2 years later they had combined over 70,000miles of varied driving throughout the UK on road and track. During the early stages of testing it was established that the cars are capable of very quick launch times once tuned, however, it equally became apparent that the ECU torque strategy needed to be carefully calibrated to help each car achieve optimum performance while keeping factory OEM style drivability and mechanical sympathy for the DSG. 2016 saw the start of the Global Beta test program throughout the Revo Authorised dealer network in Russia, South Africa, Brazil, America, Malaysia, Australia, South Korea, Italy, Germany and Spain to name but a few. This ability to get people driving their own cars provided crucial feedback for Revo to begin to get the product to market, safe in the knowledge we have thoroughly tested all aspects of DSG tuning in collaboration with Revo ECU software.   TECHNICAL DATA Revo Transmission Stage 1 Software has been designed to work with Revo Stage 1 ECU Software. Calibrated for 2 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 2500 At 45-60% throttle launch RPM is 3000 At 70% throttle launch RPM is 3250 At 85-100% throttle launch RPM is 3500 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Revo Transmission Stage 1 Software has been designed to work with Revo Stage 1 ECU Software. Calibrated for 4 Wheel Drive vehciles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 3000 At 45-60% throttle launch RPM is 3500 At 70% throttle launch RPM is 3750 At 85-100% throttle launch RPM is 4000 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds

Read more less

The Racingline Performance Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3 as well as all the other vehicles based on the same platform; with proven race championship performance to back that up. The factory intercooler has shown itself to be unable to cope with the demands of higher power, hard driven cars. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again without the recovery cool-down times needed for the production intercooler. The giant 56mm core depth of the system uses careful optimised fin design, delivering the sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. The Racingline Performance Intercooler System is a direct bolt-on replacement for the stock intercooler. It really is essential for every stage of tuning on any high performance MQB-platform car Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Brake SystemTRW Height mm69 Length mm175 Thickness mm20 Wear IndicatorIntegrated PR No.1LM Disc Ø mm340 Fitting PositionFront   Eicher Premium Brake Pad (Front) Brake pads form a vital part of the disc brake system. The friction material is applied onto the brake disc surface by the caliper pistons to generate the friction to stop the wheels turning. Brake pads are goverened by legislation known commonly as "REGULATION 90". They should be replaced when worn excessivley or when replacing the brake discs. Must be replaced in axle sets. Check for any other compnents to replace such as wear sensor leads or pad fitting pins.

Read more less

Bolt Hole Circle mm112 Brake Disc TypeVented Centering Diameter mm65 Height mm50 Minimum Thickness mm27 PR No.1LM No.Holes5 Disc Ø mm340 Fitted Quantity2 Fitting PositionFront   Pagid Brake Disc (Front) Most modern cars have disc brakes on the front wheels, and some have disc brakes on all four wheels. The function of the brake disc is to slow down or stop the car. When the brake pedal is pressed the brake pads "squeeze" the brake disc which generates friction. Brake discs should be replaced when they are worn below the minimum thickness, worn unevenly, warped or heavily scored. Should be replaced in pairs with new brake pads fitted at the same time.

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!These CNC machined precision alloy wheel spacers are 20 mm thick with a 57.1mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by Volkswagen Group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Please note: Our 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center hub. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers. Extended wheel bolts are not supplied.Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

REVO INTERCOOLER PIPE UPGRADE MQB 2.0TSI EA888 GEN3 The Revo Intercooler Pipe Upgrade kit offers incredible power and torque increases by reducing charge system resistance and improving flow compared to the restrictive stock pipework. Designed for the MQB 1.8/2.0 TSI EA888 Gen3 Engine, this upgrade is available for multiple models including VW Golf, Audi TT, A3, S3, SEAT Leon, Skoda Superb and Octavia. Featuring larger internal diameters, fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. A multitude of design features and attention to detail that Only Revo offer means this a product that not only looks great but more importantly performs. Reinforced, oil-resistant silicone hoses, lightweight mandrel-bent aluminium pipework and flush fit joints to eliminate turbulence, the Revo Intercooler Pipe upgrade is designed to fit either the stock or Revo Intercooler. KEY FEATURES Increased internal diameter Smoother airflow Fits Revo and stock intercooler +27HP & 50NM Water Meth Bung INCREASED VOLUME Each part of the kit has been designed to increase the overall diameter and increase internal volume. Larger charge air volume in the system means reduced flow resistance, allowing the turbo to expend more energy on air compression and less energy overcoming restrictions; resulting in more power. CHARGE PIPE DESIGN The Revo charge pipe is a smooth mandrel-bent aluminium pipe, coupled with a custom tapered silicone hose to gradually transition to a larger diameter from the turbo outlet to the hard pipe. The charge pipe is designed to directly replace the OEM part utilising optimised pipe routing and a unique constant-diameter design. This eliminates restrictions, including dents found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance without compromising fitment.   THROTTLE PIPE DESIGN The Revo throttle pipe increases airflow by replacing the stock part with an increased diameter, mandrel-bent aluminium hard pipe and reinforced oil resistant silicone hose. The hose connection is ID-matched to promote laminar, uniform flow across the transition of parts, as well as being slightly longer for ease of installation.   ROBUST DESIGN Only Revo scrutinises every detail of the existing system to ensure a quality replacement product for your vehicle. Alongside impressive performance benefits, this kit has several OE mounting points for stock wiring and hoses, a water-methanol installation bung and is finished in black with a laser-etched Revo logo.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The benefits of the Revo intercooler pipe upgrade allows the turbo to run more efficiently, moving a larger volume of air and minimising turbulence. This increases power and torque, especially in the middle of the rev range as highlighted during controlled Dyno testing. PERFORMANCE DATA Fitted to a Skoda Octavia vRS (2.0 TSI EA888 Gen 3) fitted with the Revo IS38ETR Turbo and Performance Pack, the Revo intercooler pipe upgrade gave an impressive gain of more than +27HP and +50NM at 3600RPM when compared to the stock parts being fitted, with a constant gain throughout the rev range, most notably from 3500-5000 RPM.   FITMENT   VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 1.8 / 2.0TSI 2012 > Audi S3 8V 2.0TSI 2012 > Audi TT / TTS 2.0TSI 2015 > Seat Leon 1.8 / 2.0TSI 2013 > Skoda Octavia 1.8 / 2.0TSI 2013 > Skoda Superb 1.8 / 2.0TSI 2015 > VW Golf Mk7 / Allroad / Sportwagen 1.8 / 2.0TSI 2013 > VW Golf Mk7 GTI / R 2.0TSI 2014 > VW Passat 1.8 / 2.0TSI 2015 > VW Tiguan 2.0TSI 2016 > VW Touran 2.0TSI 2016 >   Notes: Simple replacement of the OEM part Designed to fit with the stock airbox or Revo intake(s). Third-party intakes may cause fitment issues.  Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

WHY CHOOSE THE K-BRACE?   > The main role of bracing is to increase rigidity and stability of a vehicle by preventing body roll, therefore improving grip, steering feedback and response. The K-Brace is an adaption of a strut/tower brace, but provides the same solution with significant enhancements. HEIGHTENED PERFORMANCE  > With the 4 fixing points and making use of a triangulation design, the K-brace is able to produce an undoubted amount of support in comparison to that from a singular bar strut brace. UNIQUE DESIGN > Car Manufacturers often use additional strengthening supports to the strut mountings of a standard vehicle. Therefore, by utilising those supports, in conjunction with the design of the K-Brace we are able to reduce the structural flex of the body or chassis especially during cornering. INNOVATIVE SOLUTIONS > The K-Brace will always be mounted in the most optimum position in your vehicle, while taking into consideration usability of the standard car. Rear folding seats remain fully functional, while boot space is optimised without compromising performance. TAILORED PREFERENCE > The industrial standard powder coating we provide is second to none. With 6 colours to choose from we are giving you the option to choose your alternative. VOLKSWAGEN GOLF MK7 K-BRACE  K-Brace can be installed using the Fitting aid Provided. Fits ALL Volkswagen Golf MK7 Variants including the Estate 2013 - 2020 Available in Black-White-Grey-Red-Blue-Yellow or Unpainted International delivery available  21 Working Day lead time Quality guaranteed. Please note; REQUIRES DRILLING AND SOME MODIFICATIONS TO THE CARPET. THERE ARE 8 - 13MM HOLES TO BE DRILLED TO ALLOW FOR RIVNUTS TO BE INSTALLED USING THE TOOL SUPPLIED.  

Read more less

VW Golf MK7 (Strut 54.5) (13+) 7/6kg.mm Coilover Type: RS This is the kit we recommend for the best balance of performance and comfort, designed by the factory to have the best overall compromise of spring rate, ride height range, top mount design and damping rate to suit the majority of car owners. It is more than capable of dealing with fast road and track work but also retains a high degree ride civility so the car can still be used for mundane duties and long journeys without the ride becoming tiring. The RA series coilover kits are supplied with aluminium front top mounts with pillowball centres (camber adjustable if macpherson) and aluminium rear top mounts with rubber centres or no top mounts

Read more less

REAR BODY BRACE Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES IT DO? Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why the Clubsport S Golf gets a factory rear brace.  The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify. PRACTICAL Compatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points. LIGHTWEIGHT A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars. ADJUSTABLE Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car. Confirmed Fitment Golf Mk7 Hatch Golf Mk7.5 Hatch Golf Mk7 Estate Golf Mk7.5 Estate  

Read more less