Performance - VW JETTA MK5 (2005-2010)

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Key facts Pipe Ø: 2.75" (69.85mm) Barcode (GTIN): Tip style: Twin 76.2mm Jet Fitting takes from 1.00 to 1.50 hours O.E system requires cutting for removal. FITS: Volkswagen Jetta Mk5 GLI 2.0T FSI 2006 to 2010   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap FITS: Audi A3 1.8 TSI 2WD 3-Door 2008 to 2012 Audi A3 2.0T FSI quattro 5 door SportBack 2004 to 2012 Audi A3 2.0T FSI 2WD 3 door 2003 to 2012 Audi A3 2.0T FSI 2WD 5 door Sportback 2003 to 2012 Audi S3 2.0 T quattro 3-Door 8P 2006 to 2012 Audi S3 2.0 T quattro Sportback 8P 2007 to 2012 Seat Leon FR 2.0 T FSI 200-211PS 2006 to 2013 Seat Leon Cupra 2.0T FSI 240PS 2006 to 2011 Seat Leon Cupra K1 2007 to 2009 Skoda Octavia vRS 2.0 TSI 2010 to 2013 Volkswagen Golf Mk5 GTi 2.0T FSI 2004 to 2009 Volkswagen Golf Mk5 GTi Edition 30 2.0T FSi 230PS 2006 to 2009 Volkswagen Golf Mk6 GTi 2.0 TSI 210PS 2009 to 2013 Volkswagen Golf Mk6 R 2.0 TFSI 270PS 2009 to 2013 Volkswagen Jetta Mk5 GLI 2.0T FSI 2006 to 2010 Volkswagen Scirocco GT 2.0 TSi 200PS 2008 to 2016 Large-bore Downpipe and De-catMust be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap Cast Downpipe with HJS High Flow Sports Catwith HJS HQ 200 Cell High Flow Sports Cat. For Fitment to Milltek Sport 2.75" cat-back systems only. Requires a Stage 2 ECU remap Cast Downpipe with Race Catwith 200 Cell Race Cat. For Fitment to Milltek Sport 2.75" cat-back systems only. Requires a Stage 2 ECU remap   Part No. Description Tailpipe Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU284 Large-bore Downpipe and De-cat - Must be fitted with the Milltek Sport cat-back system and requires a Stage 2 ECU remap 76.2 3 No 3 No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less