racingline

Racingline 380mm Carbon Ceramic Disc UpgradeThis pair of replacement Complete Discs come ready to install as a replacement for your Racingline Stage 3 Carbon Ceramic Brake kit.They can also be used to Upgade an existing Racingline Stage 3 Brake kit with Steel Discs, however you must also purchase the appropriate padss. Please note: They are not compatible with the Older generations of Racingline Big Brake Kit.

Read more less

Racingline Strap OnlyTo suit the following Racingline VWR Intake kits:- VWR12G5GT- VWR12G60R- VWR1230S3- VWR12L0CR

Read more less

Racingline Performance – Subframe Torque Link Mount Fits Transverse engines:* 3.2 V6* 2.0TFSI* 2.0TSI* 2.5TFSI   To harness your power increases, and transfer that power to the road or track where you need it, Racingline Performance Engine Mounts will give a much more solid drive, and crucially give additional durability. The Racingline Performance Engine Mounts are certainly not one of the most exciting or visual modifications that you can do to your car! But they are truly one of the most worthwhile for anyone who appreciates the driving dynamics of their car. Almost everyone who tries these mounts on a Golf or Scirocco wants them. WHAT DO THE ENGINE MOUNTS DO?The whole engine and gearbox is located in only three places. One at engine-side plus another at the end of the gearbox which support the weight of the whole drivetrain, plus a third torque arm underneath the engine to contain the fore-aft movement (often called the pendulum or dog-bone mount). The standard car uses very compliant rubber in these mounts to give a soft take-up of power and isolate the cabin from drivetrain noise. For a daily driven standard car, these bushings do a good job of keeping cabin vibration to a minimum. But when you ask more of these mounts, with higher power or hard driving, the flex in the bushes becomes very noticeable. This gives a slightly loose feeling to the drivetrain and an increased chance of wheel-hop under hard acceleration as the whole engine and box assembly judders. If your car produces high power, or has covered quite a few road miles, or is driven hard, the softness of these three standard rubber mounts allows more and more movement as you come on and off the power. With worn mounts, we have even seen failures of the exhaust manifold and driveshafts as the whole drivetrain shifts around under load. WHAT DIFFERENCE DO THE Racingline Performance MOUNTS MAKE?The Racingline Performance engine mounts stiffen the whole location of the drivetrain greatly to give a much crisper feeling to your car. This means no more jerky behaviour on and off the throttle or when you change gear, and all-but eliminates wheel hop off the line. Of course, a bit more noise from the drivetrain comes into the cabin, but most keen drivers love the sense that they are more connected to their car. As opposed to some aftermarket push in bushes which crudely fill the voids in the factory mounts, the Volkswagen units are completely redesigned replacement mount assemblies. We specify a stiff urethane of 75A durometer which allows some movement within the mounts, and filters much of the drivetrains vibration but with a design that very significantly reduces the movement on each. For most road cars, wed recommend the lower engine mount on its own, leaving the two upper mounts standard. This makes a huge difference to how the car drives, and is a pretty minimal difference to the cabin refinement. The lower engine mount on its own is one of our most popular upgrades for Golfs and Sciroccos. For more heavily modified, track and motorsport cars, all three mounts should be upgraded. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR15G503

Read more less

Racingline Tapered Seat Aluminum Nut Only. We supply both Radius 'Ball Seat' and Tapered 'Conical Seat'.Please ensure you check you are ordering the correct type to suit your wheels.SOLD INDIVIDUALLY

Read more less

Racingline Track Suspension Coilover Kit – VWR340000-G6 The VWR TrackSport kit has been developed directly from VWR’s full race kits; the only differences are in the internal valving settings and the spring rate/lengths that are supplied. The kit really is that special. Coilover rear dampers, plus 45mm inverted ‘thick-stem’ front damper providing a super stiff front McPherson strut, unique in the market. Easy set up: 12-point adjustment of bump and rebound damping, adjustable with no tools or jacking via the beautifully over-engineered adjuster knobs. Includes shortened Adjustable Drop Links plus Adjustable Top Mounts, CNC Machined and pre installed pillow ball bearing, for super accurate camber set up. INVERTED FRONT The TrackSport kit uses inverted ‘thick-stem’ front dampers, giving a much stiffer strut to avoid flex under intense load. COILOVER REAR Rear dampers are now coilover, allowing a full range of spring travel at the rear, rather than relying on shorter springs (as non-coilover rear kits do). LIGHTWEIGHT Lightweight, shortened aluminium bodies, exactly as VWR’s race kits use for a really significant weight saving. ADJUSTABLE DROP LINKS When you lower your car, the VWR Adjustable Drop Links included with Tracksport will readjust the preload on your anti roll bar and add precision to handling response. LINEAR SPRINGS Supplied with 60mm id linear springs with helper springs; in standard sizes to make them easily swapped for different rates for full set-up options. ADJUSTABLE TOP MOUNTS Tracksport comes with the VWR Adjustable Top Mounts, allowing camber adjustment and a transformation in precision. Confirmed Fitment (VWR340000-G6) VW Golf 5 2005-2008 1K VW Golf 5 GTI 2005-2008 1K VW Golf 5 R32 2005-2008 1K VW Golf 5 GTI ED30/Pirelli 2006-2007 1K VW Golf 6 2008-2014 5K VW Golf 6 GTI 2009-2014 5K VW Golf 6 R 2009-2014 5K VW Golf 6 R 2009-2014 5K VW Scirocco TSI/TDI 2008+ VW Scirocco R 2009+ VW Jetta V GLI 2005-2011 1K VW Jetta VI GLI 2011+ 1B VW Passat CC 2008-2017 A6 Audi A3 2003-2012 8P Audi S3 2006-2012 8P Audi TT 20 TFSI II 2006-2014 8J Audi TTS II 2008-2014 8J Audi TTRS II 2009-2014 8J SEAT Leon II 2005-2012 1P SEAT Leon Cupra/R II 2006-2012 1P Skoda Octavia II 2004-2013 1Z Skoda Octavia vRS II 2004-2013 1Z Looking for newer generation vehicles? Check out the VWR340000-G7 kit here. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR340000-G6

Read more less

Racingline Track Suspension Coilover Kit – VWR340000-G7 The VWR TrackSport kit has been developed directly from VWR’s full race kits; the only differences are in the internal valving settings and the spring rate/lengths that are supplied. The kit really is that special. Coilover rear dampers, plus 45mm inverted ‘thick-stem’ front damper providing a super stiff front McPherson strut, unique in the market. Easy set up: 12-point adjustment of bump and rebound damping, adjustable with no tools or jacking via the beautifully over-engineered adjuster knobs. Includes shortened Adjustable Drop Links plus Adjustable Top Mounts, CNC Machined and pre installed pillow ball bearing, for super accurate camber set up. INVERTED FRONT The TrackSport kit uses inverted ‘thick-stem’ front dampers, giving a much stiffer strut to avoid flex under intense load. COILOVER REAR Rear dampers are now coilover, allowing a full range of spring travel at the rear, rather than relying on shorter springs (as non-coilover rear kits do). LIGHTWEIGHT Lightweight, shortened aluminium bodies, exactly as VWR’s race kits use for a really significant weight saving. ADJUSTABLE DROP LINKS When you lower your car, the VWR Adjustable Drop Links included with Tracksport will readjust the preload on your anti roll bar and add precision to handling response. LINEAR SPRINGS Supplied with 60mm id linear springs with helper springs; in standard sizes to make them easily swapped for different rates for full set-up options. ADJUSTABLE TOP MOUNTS Tracksport comes with the VWR Adjustable Top Mounts, allowing camber adjustment and a transformation in precision. Confirmed Fitment (VWR340000-G7) SEAT Leon III 2012+ 5F SEAT Leon Cupra III 2014+ 5F Audi A3 2012+ 8V  Audi S3 2013+ 8V Audi RS3 2015+ 8V Audi TT III 2014+ 8S Audi TT 2.0 TSI III 2014+ 8S Audi TTS III 2015+ 8S VW Golf 7 GTI 2013+ 5G VW Golf 7 R 2013+ 5G VW Golf 7 GTI ClubSport 2016+ 5G Skoda Octavia III 2012-2020 1Z Skoda Octavia vRS III 2004-2020 1Z Looking for older generation vehicles? Check out the VWR340000-G6 kit here. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR340000-G7

Read more less

Racingline Performance – Engine Mount Fits:* Golf Mk7 GTI* Golf Mk7 R* Leon Cupra 280* A3 8V* S3 8V* Octavia vRS Mk3 To harness your power increases, and transfer that power to the road or track where you need it, Racingline Performance Engine Mounts will give a much more solid drive, and crucially give additional durability. The Racingline Performance Engine Mounts are certainly not one of the most exciting or visual modifications that you can do to your car! But they are truly one of the most worthwhile for anyone who appreciates the driving dynamics of their car. Almost everyone who tries these mounts on a Golf or Scirocco wants them. WHAT DO THE ENGINE MOUNTS DO?The whole engine and gearbox is located in only three places. One at engine-side plus another at the end of the gearbox which support the weight of the whole drivetrain, plus a third torque arm underneath the engine to contain the fore-aft movement (often called the pendulum or dog-bone mount). The standard car uses very compliant rubber in these mounts to give a soft take-up of power and isolate the cabin from drivetrain noise. For a daily driven standard car, these bushings do a good job of keeping cabin vibration to a minimum. But when you ask more of these mounts, with higher power or hard driving, the flex in the bushes becomes very noticeable. This gives a slightly loose feeling to the drivetrain and an increased chance of wheel-hop under hard acceleration as the whole engine and ‘box assembly judders. If your car produces high power, or has covered quite a few road miles, or is driven hard, the softness of these three standard rubber mounts allows more and more movement as you come on and off the power. With worn mounts, we have even seen failures of the exhaust manifold and driveshafts as the whole drivetrain shifts around under load. WHAT DIFFERENCE DO THE Racingline Performance MOUNTS MAKE?The Racingline Performance engine mounts stiffen the whole location of the drivetrain greatly to give a much crisper feeling to your car. This means no more jerky behaviour on and off the throttle or when you change gear, and all-but eliminates ‘wheel hop’ off the line. Of course, a bit more noise from the drivetrain comes into the cabin, but most keen drivers love the sense that they are more ‘connected’ to their car. As opposed to some aftermarket ‘push in’ bushes which crudely fill the voids in the factory mounts, the Volkswagen units are completely redesigned replacement mount assemblies. We specify a stiff urethane of 75A durometer which allows some movement within the mounts, and filters much of the drivetrain’s vibration but with a design that very significantly reduces the movement on each. For most road cars, we’d recommend the lower engine mount on its own, leaving the two upper mounts standard. This makes a huge difference to how the car drives, and is a pretty minimal difference to the cabin refinement. The lower engine mount on its own is one of our most popular upgrades for Golfs and Sciroccos. For more heavily modified, track and motorsport cars, all three mounts should be upgraded.   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR15G702

Read more less

Racingline Performance – Transmission Mount Fits Transverse engines:* 2.0TFSI* 2.0TSI   To harness your power increases, and transfer that power to the road or track where you need it, Racingline Performance Engine Mounts will give a much more solid drive, and crucially give additional durability. The Racingline Performance Engine Mounts are certainly not one of the most exciting or visual modifications that you can do to your car! But they are truly one of the most worthwhile for anyone who appreciates the driving dynamics of their car. Almost everyone who tries these mounts on a Golf or Scirocco wants them. WHAT DO THE ENGINE MOUNTS DO?The whole engine and gearbox is located in only three places. One at engine-side plus another at the end of the gearbox which support the weight of the whole drivetrain, plus a third torque arm underneath the engine to contain the fore-aft movement (often called the pendulum or dog-bone mount). The standard car uses very compliant rubber in these mounts to give a soft take-up of power and isolate the cabin from drivetrain noise. For a daily driven standard car, these bushings do a good job of keeping cabin vibration to a minimum. But when you ask more of these mounts, with higher power or hard driving, the flex in the bushes becomes very noticeable. This gives a slightly loose feeling to the drivetrain and an increased chance of wheel-hop under hard acceleration as the whole engine and box assembly judders. If your car produces high power, or has covered quite a few road miles, or is driven hard, the softness of these three standard rubber mounts allows more and more movement as you come on and off the power. With worn mounts, we have even seen failures of the exhaust manifold and driveshafts as the whole drivetrain shifts around under load. WHAT DIFFERENCE DO THE Racingline Performance MOUNTS MAKE?The Racingline Performance engine mounts stiffen the whole location of the drivetrain greatly to give a much crisper feeling to your car. This means no more jerky behaviour on and off the throttle or when you change gear, and all-but eliminates wheel hop off the line. Of course, a bit more noise from the drivetrain comes into the cabin, but most keen drivers love the sense that they are more connected to their car. As opposed to some aftermarket push in bushes which crudely fill the voids in the factory mounts, the Volkswagen units are completely redesigned replacement mount assemblies. We specify a stiff urethane of 75A durometer which allows some movement within the mounts, and filters much of the drivetrains vibration but with a design that very significantly reduces the movement on each. For most road cars, wed recommend the lower engine mount on its own, leaving the two upper mounts standard. This makes a huge difference to how the car drives, and is a pretty minimal difference to the cabin refinement. The lower engine mount on its own is one of our most popular upgrades for Golfs and Sciroccos. For more heavily modified, track and motorsport cars, all three mounts should be upgraded. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR15G501

Read more less

Racingline Turbo Inlet EVO EA888 Gen.4 Engines with Garrett Turbos FOR 2.0TSI ‘LOWER OUTPUT’ 245PS EA888.4 Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo. For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI, Audi A3, Leon Cupra and Octavia vRS only. Our new Turbo Inlet System for the 245PS MQB ‘EVO’ cars such as Golf 8 GTI is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic ‘bellows’ pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet – in other words, terrible for flow. The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 62.5mm on the factory part right up to 76mm. It’s by combining the two parts of the kit that’s allowed us to enlarge the diameter of both the Inlet and the Hose so much – and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! Confirmed Applications VW Golf 8 GTI 2020+VW Tiguan II 2.0 TSI 245ps 2021+ Audi A3 2.0 TSI 8Y 2020+Audi TT 45 TFSI 2.0 TSI 8S 2021+Audi Q3 45 TFSI 2.0 TSI 2018+ Cupra Leon IV 245 TSI FW 2020+Cupra Formentor 245PS 2020+ SEAT Tarraco FR Sport 2.0 TSI 245ps 2021+ Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120003

Read more less

Racingline Turbo Inlet EVO EA888 Gen.4 Engines with Continental Turbos FOR 2.0TSI ‘HIGHER OUTPUT’ 300PS – 320PS EA888.4 – TURBO 90 INLET & SILICONE INLET HOSE COMBINATION Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo. For the Continental turbo (higher output) 300-320ps engines such as Golf 8 R, Golf 8 GTI CS, Audi S3 8Y, Cupra Leon and Formentor models. Our new Turbo Inlet System for the 300-320PS MQB ‘EVO’ cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic ‘bellows’ pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet – in other words, terrible for flow. The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm. It’s by combining the two parts of the kit that’s allowed us to enlarge the diameter of both the Inlet and the Hose so much – and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! Confirmed Applications VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Arteon R 2.0 TSI 320ps 2020+VW Tiguan II R 2.0 TSI 320ps 2021+ Audi S3 8Y 2020+ Cupra Leon IV 300 TSI FW 2020+Cupra Formentor 310PS 2020+

Read more less

Racingline Turbo Muffler Delete For MQB-platform car using the 1.8T and 2.0T EA888 TSIengines with the IHI IS20 or IS38 turbo. The Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing OEM part with a smooth, turbulence free air path exiting the turbo. What does it do? The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don’t want it. By replacing the standard part with our Racingline Turbo Muffler Delete, you’ll replace this restrictive section with a straight, uninterrupted piece. The result: better boost response giving a little more power, all the while being able to actually hear your turbo working. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI EA888 gen.3 & gen.3B engines VWR160001  VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 VW Golf 7 & 7.5 R 2013-2020 VW Golf 7 & 7.5 1.8 TSI 2013-2020 VW Passat 2.0 TSI B8 2015+ VW Arteon 2.0 TSI 2017+ VW T-Roc R 2.0 TSI 2019+ VW Tiguan II 2.0 TSI 2016+ VW Jetta / GLI 7 2018+ Audi S1 2.0 TFSI 2015-2018 Audi S3 8V 2013-2020 Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 Audi TT 2.0 TSI 8S 2014+ Audi TTS 2.0 TSI 8S 2015+ Audi SQ2 2018+ Audi Q3 45 TFSI 2.0 TSI 2018+ SEAT Leon III Cupra 5F 2014-2020 SEAT Leon III 1.8 TSI 5F 2014-2020 Cupra Ateca 2018+ SEAT Tarraco 2.0 TSI 2018+ Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 Skoda Superb III 1.8 / 2.0 TSI 3V 2015+   CONFIRMED APPLICATIONS 2.0 TSI MQB / EA888 Gen.3B 190 hp engine with MAF VWR 160001 VW Passat 2.0 TSI 190hp B8 2018+ VW Arteon 2.0 TSI 190hp 2017+ VW T-Roc 2.0 TSI 190hp 2017+ VW Tiguan II 2.0 TSI 190ps 2018+ VW Polo 6 GTI 2.0 TSI AW 2017-2021 Audi A1 2.0 40TFSI GB 2019-2021 Audi A3 40TFSI 2.0 TSI 190hp 2016-2020 Audi TT 40 TFSI 2.0 TSI 197hp 2018+ Audi Q2 40 TFSI 2.0 TSI 190hp 2017+ Audi Q3 40 TFSI 2.0 TSI 190hp 2018+ SEAT Leon III 2.0 TSI 190hp 5F 2018+ SEAT Ateca 2.0 TSI 190hp 2017+ SEAT Tarraco 2.0 TSI 190ps 2018+ Skoda Octavia III 2.0 TSI 190hp 5E 2017-2020 Skoda Superb III 2.0 TSI 190hp 3V 2019+ Skoda Karoq 2.0 TSI 190hp 2018+ Skoda Kodiaq 2018+ Skoda Kodiaq 2.0 TSI 190hp 2018+  

Read more less

RacingLine Twin Dogbone Mount Inserts (MQB / MQB Evo) The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two Billet Inserts.All of the foreward/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages.The Twin Dogbone Insert uses not one but two precision machined billet inserts to avoid the damaging bending moment that comes from fitment of a single insert. Many companies offer either the upper or the lower mount insert alone - we advise very strongly against fitting just a single insert. With a single insert, the twisting moment force on the mount becomes significant, leading to almost-certain failure. That’s why RacingLine only offer the Twin Dogbone Insert, keeping the forces balanced top and bottom through the mount and remove the risk of twisting forces destroying your insert.The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchanges - especially valuable on FWD cars.Fitment of the Twin Inserts will only add a minimal NVH increase to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.Each Twin Dogbone Insert start life as a billet of T6061 Aluminium, before being precision CNC-machined into shape. Finished in RacingLine’s trademark black anodised finish for durability over many years. Easy, straightforward installation designed to be fitted without subframe removal means it just takes minutes. Why not just fit one of the two inserts?After all, many companies offer either the upper or the lower mount insert alone.RacingLine strongly advise against fitting just one insert. With a single insert, the twisting moment force on the mount becomes significant, leading to almost-certain failure.That’s why RacingLine only offer the Twin Dogbone Insert, with two billet inserts to keep the forces balanced top and bottom through the mount and remove the risk of twisting forces destroying your insert.Version 1 - This is compatible with OE Bushing Part no# 5Q0 198 037 AVersion 2 - This is compatible with OE Bushing Part no# 5Q0 198 037 F

Read more less