Airtec

TECHNICAL DATA Bolt on BHP, by lowering the charge Air temperatures, a remapped car has increased power by ecu changes that raise boost pressure and other parameters, this increase in boost pressure raise intake temps and power loss soon follows, by fitting an up-rated intercooler you lower these intake temps, in turn increasing bhp and making your engine safer The step design has been proven by two other Intercooler manufactures and proved this design works, we have put our own twist on things with smooth cast end tanks and our proven bar ‘n’ plate intercooler core Fits all Turbo powered Mini cooper S, no drilling required. Some minor trimming of lower grill may be required. Available in Pro-Series satin Black only Approximate Dimensions: 699mm width 210mm height Step core design 80mm bottom section, 40mm top section Intercooler Volume Capacity (The amount of charged air that the intercooler can hold) AIRTEC: 3.2 litres AIRTEC part number: ATINTMINI01

Read more less

TECHNICAL DATA AIRTEC Mini R53 Cooper S Oil Cooler ADAPTOR PLATE ONLY – Oil cooler ADAPTER PLATE – If you want to add an oil cooler to your Gen 1 MINI but do not fancy installing a full kit, here is our AIRTEC adapter plate that allows you to tap into the existing oil system. Comes with #10 fittings. Fits 2003-2006 R53 MINI Cooper S Hatchback with Manual Transmissions.

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit R53 Cooper S models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a natural silver or high quality powder coated black finish. It also  features a sight glass to view the coolant level and comes with an uprated high pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style. Features Direct replacement header tank for the R53 Cooper S Lightweight aluminium construction High quality black powder coat or natural silver finish Sight glass to view coolant level Uprated high pressure cap included No drilling or cutting required All fixtures included as well as fitting instructions Registered Design Right number: 6049901 AIRTEC part no: ATMSMINI2

Read more less

TECHNICAL DATA Bolt on BHP, by lowering the charge Air temperatures, a remapped car has increased power by ecu changes that raise boost pressure and other parameters, this increase in boost pressure raise intake temps and power loss soon follows, by fitting an up-rated intercooler you lower these intake temps, in turn increasing bhp and making your engine safer AIRTEC Test results – Tim’s 233.3 bhp (Airtec cooled) Tuned Mini R53 @ Amd rolling road 10th May 2013 – Note, Results below were with bonnet closed on every run. Fits all Supercharged powered Mini R53 cooper S Standard Intercooler – Peak power 204.9 bhp & 161.1 Ib/ft Run 1 -Temperature Into intercooler from charger 150 degree & Out of Intercooler into engine 123 degree Run 2 -Temperature Into intercooler from charger 152 degree & Out of Intercooler into engine 130 degree Run 3 -Temperature Into intercooler from charger 155 degree & Out of Intercooler into engine 135 degree Conclusion – the standard intercooler on a tuned Mini just doesn’t work, most owners know this, here’s the proof for other owners that didn’t know. Competitors Intercooler 50mm core (Note, this version didn’t have Air diverter scoop) – Peak power 216.0 bhp & 171.4 Ib/ft Run 1 -Temperature Into intercooler from charger 124 degree & Out of Intercooler into engine 66 degree Run 2 -Temperature Into intercooler from charger 131 degree & Out of Intercooler into engine 67 degree Run 3 -Temperature Into intercooler from charger 140 degree & Out of Intercooler into engine 89 degree Conclusion – This intercooler worked much better than standard, but we feel the 50mm tube and fin core still couldn’t handle highly tuned Mini’s intake temps. Airtec Intercooler 60mm core – Peak power 233.3.0 bhp & 190.5 Ib/ft Run 1 -Temperature Into intercooler from charger 130 degree & Out of Intercooler into engine 44 degree Run 2 -Temperature Into intercooler from charger 137 degree & Out of Intercooler into engine 47 degree Run 3 -Temperature Into intercooler from charger 149 degree & Out of Intercooler into engine 49 degree Conclusion – The Airtec 60mm bar and plate core works really well and keeps temps below 50 degree’s   Features Available in Pro-Series Black finish No drilling required Huge Air deflector fin ‘forces air into front section of intercooler’ Full Alloy Air ram scoop CNC connecting flanges First R53 of the shelf Intercooler to have 60mm core Cast alloy smooth flow end tanks, no turbo surge issue’s with this design. Mini specialists ‘Orranje’ Airtec test results http://www.minitorque.com/forum/f751/orranje-presents-airtec-tmic-r53-mini-36247/ Now only available in Pro-Series Black.

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this smart front mount intercooler for the Mini R53 Great addition to any Mini R53 Features 50mm thick track proven bar and plate core, spec’d to AIRTEC design AIRTEC Cast end tanks for improved Airflow and unbeatable strength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes 3-4 hours 3 year unlimited mileage warranty Only available in Pro-Series Black AIRTEC Logo available for no extra charge Huge surface area whilst still allowing plenty of airflow to top section of the radiator, essential for hotter climate countries. Please note: This kit is a custom install and will require the air-con to be removed & some minor cutting under the bonnet. This intercooler is only available in Pro-Series Black. WILL NOT FIT WITH AIRTEC OIL COOLER KIT Approximate dimensions: Core thickness 50mm Total height 340mm ‘including 40mm pipes’ Width 440mm Pipe diameter used 45mm o.d. Hose colour shown for illustraion purposes only Registered Design Right number: 6030023 AIRTEC part no: ATINTMINI03

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this huge front mount for the Peugeot RCZ 1.6 Turbo. Great addition to any standard, or remapped, RCZ. Features 60mm thick track proven Bar and Plate core, specked to AIRTEC design AIRTEC cast end tanks for improved airflow and unbeatable strength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes less 2-3 hours, comes with fitting instructions 3 year unlimited mileage warranty Available in Pro-Series Satin Black or Natural Silver AIRTEC logo available at no extra charge Huge surface area, but still allows plenty of airflow to top section of the radiator, which is essential for hotter climate countries Approximate dimensions: 60mm thick 175mm height 760mm width  

Read more less

TECHNICAL DATA Why not add top alloy boost pipe kit for just £129.95 which includes 2 x alloy boost pipes, 1 x silicone joiner and stainless jubilee clips. Fits Citreon DS3, Peugeot 207 GTI, Peugeot 208 GTI. Part no: ATINTP&C4

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to its growing range of performance intercoolers, in the way of this huge stage 3 front mount for the 207 GTI 1.6 Turbo. Great addition to any standard, or remapped, 207 GTI. Features: 60mm thick track proven Bar-and-Plate core, specced to AIRTEC design AIRTEC cast end tanks for improved Airflow and un-beatable stength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes less 2-3 hours, comes with fitting instructions 3 year unlimited mileage warranty Available in Pro-Series satin Black only AIRTEC logo available at no extra charge Huge surface area, but still allows plently of airflow to top section of the radiator, this is essential for hotter climate countries. Intercooler testing carried out AMD Tuning: Run 1 IN: 190 degrees OUT: 23 degrees Run 2 IN: 193 degrees OUT: 25.5 degrees Approximate dimensions: Height: 378mm Width: 603mm (Including end tanks) Thick: 60mm Pipe outlets: 60mm

Read more less

AIRTEC has now added a great addition to its growing range of performance intercoolers, in the way of this huge front mount for the 207 GTI 1.6 Turbo. New V2 design. Great addition to any standard, or remapped, 207 GTI. Features 50mm thick track proven Bar-and-Plate core, specked to AIRTEC design AIRTEC cast end tanks for improved Airflow and un-beatable strength Comes with silicone and alloy boost pipe connecting hoses – includes stainless clips Fitting takes less 2-3 hours, comes with fitting instructions 3 year unlimited mileage warranty Available in Pro-Series satin Black or Natural Silver AIRTEC logo available at no extra charge Huge surface area, but still allows plenty of airflow to top section of the radiator, this is essential for hotter climate countries. Approximate dimensions: 50mm thick 290mm height 510mm width

Read more less

AIRTEC Motorsport top mount intercooler for Mazda 3 MPS MK2. Proven to be a great upgrade for any remapped cars. AIRTEC have now added the top mount intercooler for the Mazda MK2 MPS to their ever growing range of products. 1x huge 75mm thick core Fitting instructions suppled Finished in Pro-Series black High flow cast end tanks Easy fitting in 25 minutes depending on mechanical skill Proven power increase on road and track use AIRTEC approximate dimensions: 340 length310mm width75mm thick Standard intercooler: 325 length295 width50mm thick Cubic volume STANDARD – 4793mmCubic volume AIRTEC – 7905mm

Read more less

AIRTEC front mount intercooler for the Mk2 Mazda 3 MPS. Supplied with new, modified crash bar. AIRTEC have now added a great addition to its growing range of performance intercoolers. In the way of this huge front mount intercooler for the Mazda 3 MPS Mk2. A much needed upgrade for your remapped Mazda MPS. Huge 90mm core with flowed cast end tanks High quality silicone hoses finished with stainless jubilee clips. Intercooler mounted to new modified crash bar supplied so no cutting or joining required No cutting to bumper needed Fitting instructions and all required fittings supplied Proven power increase on road and track use Available in Pro-Series black AIRTEC 3 year unlimited mileage warranty Fitting will take approximately 2-3 hours Approximate Dimensions Width – 750mm Height – 210mm Thick – 90mm Registered Design Right number: 6023248 ONLY AVAILABLE IN PRO-SERIES BLACK

Read more less

TECHNICAL DATA AIRTEC huge front mount intercooler for the Mazda 3 MPS Mk1. A much needed upgrade for your re-mapped Mazda MPS. 70mm core with flowed cast end tanks High quality silicone hoses supplied with stainless jubilee clips Retains original crash bar and fog lights No cutting to bumper needed Fitting instructions supplied along with all required fittings Proven power increase Available in pro series black or natural silver AIRTEC 3 year unlimited mileage waranty Fitting takes approximately 2-3 hours Test results taken on the AIRTEC demo car Standard top mount intercooler: Run 1 In – 160.5 degrees Out – 70.7 degrees Run 2 In – 160.6 degrees Out – 70.4 degrees Run 3 In – 162.1 degrees Out – 73.9 degrees AIRTEC Stage 3 intercooler Run 1 In – 123.7 degrees Out – 23.8 degrees Run 2 In – 119.2 degrees Out – 22.6 degrees Run 3 In – 120.1 degrees Out – 22.8 degrees   Approximate Dimensions: Width – 740mm (not including pipes) Height – 170mm Depth – 70mm NOW AVAILABLE IN PRO-SERIES BLACK ONLY! Registered Design Right number: 6023247

Read more less

AIRTEC are proud to announce the latest Stage 3 intercooler for the Mk1 Mazda 3 MPS. AIRTEC have now added a great addition to its growing range of performance intercoolers. In the way of this huge front mount intercooler for the Mazda 3 MPS Mk1. A much needed upgrade for your remapped Mazda MPS. 1 x Huge 90mm core with flowed cast end tanks, This means less welding and a stronger intercooler. High quality silicone hoses which mean better flow inside the pipework, finished with stainless jubilee clips. Retains original crash bar No cutting to bumper needed Retains fog lights Fitting instructions and all required fittings supplied Proven power increase on road and track use Available in satin black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Test results taken on the AIRTEC demo car Standard top mount intercooler: Run 1 In – 160.5 degrees Out – 70.7 degrees Run 2 In – 160.6 degrees Out – 70.4 degrees Run 3 In – 162.1 degrees Out – 73.9 degrees AIRTEC Stage 3 intercooler Run 1 In – 123.7 degrees Out – 23.8 degrees Run 2 In – 119.2 degrees Out – 22.6 degrees Run 3 In – 120.1 degrees Out – 22.8 degrees Approximate Dimensions: Width – 750mm (not including pipe) Height – 210mm Thick – 90mm Registered Design Right number: 6049896 PLEASE NOTE INTERCOOLER NOW ONLY AVAILABLE IN BLACK (NOT SILVER) 

Read more less

AIRTEC Motorsport top mount intercooler for the Mazda 3 MPS MK1. Proven to be a great upgrade for any remapped cars. AIRTEC have now added the top mount intercooler for the Mazda MK1 MPS to their ever growing range of products. 1x huge 75mm thick core Fitting instructions suppled Finished in Pro-Series black High flow cast end tanks Easy fitting in 25 minutes depending on mechanical skill Proven power increase on road and track use AIRTEC approximate dimensions: 340 length310mm width75mm thick Standard intercooler: 325 length295 width50mm thick Cubic volume STANDARD – 4793mmCubic volume AIRTEC – 7905mm

Read more less

AIRTEC Motorsport Oil Catch Can Kit for Hyundai i30N Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves. Designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it. Supplied with step-by-step instructions giving this an easy DIY install, taking less than 30 minutes to fit. Features: Baffled oil catch can Oil level dipstick Three Pro Hoses silicone hoses Step-by-step fitting guide Billet fitting brackets Helps reduce carbon build-up on intake valves Will fit with standard or AIRTEC Motorsport i30N Header Tank Registered Design Right number: 6082523

Read more less

Stage 2 Airtec intercooler for the Facelift Megane. Uses standard pipe work, full height 60mm core and the essential Air-ram scoop which forces air directly into the intercooler core Rolling Road test results – carried out @ amd 19/01/16 – Ambient temperture 1 degrees Standard intercooler Run 1 – into intercooler 147 degrees – out of intercooler going to engine 55 degrees Run 2 – into intercooler 148 degrees – out of intercooler going to engine 58 degrees Run 3 – into intercooler 146 degrees – out of intercooler going to engine 62 degree   Airtec intercooler Run 1 – into intercooler 157 degrees – out of intercooler going to engine 19 degrees Run 2 – into intercooler 152 degrees – out of intercooler going to engine 18 degrees Run 3 – into intercooler 155 degrees – out of intercooler going to engine 20 degrees Test Results – The stage 2 Airtec intercooler gained 36bhp and 38.4 lbft torque agaisnt the stock Renault intercooler Features 60mm full height bar and plate core, specced to Airtec design Airtec logo’d Cast end tanks for improved Airflow and un-beatable stength Air-ram scoop that forces cold air directly into the intercooler core Gain BHP and Torque No drilling design Fitting takes 3-4 hours, comes with fitting instructions 3 year un-limited mileage warranty Available in Pro-Series satin Black only Airtec Logo available @ no extra charge Approximate dimensions: Height 400mm Width 860mm Thickness 60mm Pipe outlets are 60mm

Read more less

AIRTEC are proud to introduce the Stage 1 front mount intercooler upgrade for the pre-facelift Renault Megane 3 RS 250 and 265. Designed to fit all models, this freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Featuring a 60mm core design together with high-flow cast end tanks and lower alloy scoop to force air directly to the core, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original hoses. The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete. The intercooler is available in a choice of either Natural Silver or Pro-Series Black finishes, with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in either Natural Silver or Pro-Series Black finishes AIRTEC logo available at no extra charge Unbeatable value for money!   Approximate Dimensions: Width: 860mm Height: 300mm Depth: 60mm Outlets: 60mm  

Read more less

AIRTEC are proud to introduce the 70mm core front mount intercooler upgrade for the Renault Megane II 225 and R26. Designed to fit all models, this freer-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Featuring a 70mm core design together with high-flow cast end tanks and lower alloy scoop to force air directly to the core, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper, requires no trimming or cutting and can be used with the original hoses.   The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 1 hour to complete. The intercooler is available in a choice of either Natural Silver or Pro-Series Black finishes, with or without the AIRTEC logo. Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in either Natural Silver or Pro-Series Black finishes AIRTEC logo available at no extra charge Unbeatable value for money!

Read more less

AIRTEC Motorsport Radiator and Fan Cooling Kit for Meglio (Megane Powered Clio) This complete kit creates an easy, simple radiator upgrade solution for a Renault Megane turbo converted Clio and avoids having to modify or adapt a radiator from another car. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for a Megane engine swapped Clio 197. Designed for a Megane location header tank, fitted on the left side of the engine (looking from front of car). Offering improved cooling together with a direct replacement solution. It requires minimal trimming to the original upper plastic cowling but no cutting to the standard bumper or crash bar. Supplied complete with all fixtures, fittings and brackets and 2x 9″ sucker fans for an easy and professional installation. Finished in our Pro-Series Black only. AIRTEC part no: ATRADREN1

Read more less

AIRTEC Motorsport big boost pipe kit for a Meglio (Megane turbo powered Clio) Designed to directly replace the original boost pipes and hoses with larger and freer flowing 50mm AIRTEC Motorsport hard pipes and Pro Hoses silicone connectors. This complete kit creates an easy, simple upgrade solution for a Renault Megane turbo converted Clio. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Comes complete with 2x hard pipes and 4x Pro Hoses silicone connectors. WILL FIT WITH STOCK MEGANE INTERCOOLER

Read more less

AIRTEC Motorsport Front Mount Intercooler Kit for Meglio (Megane Powered Clio) This complete kit creates an easy, simple intercooler upgrade solution for a Renault Megane turbo converted Clio and avoids having to modify or adapt an intercooler from another car. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for the Megane engine swapped Clio 197. Fitted with a large front scoop for maximum air flow to direct air straight into the intercooler. It requires minimal trimming to the original lower plastic under tray but no cutting to the standard bumper, crash bar or fog lights. Supplied complete with all fixtures, fittings and brackets for an easy and professional installation. Finished in a choice of Pro-Series Black and options of either with or without AIRTEC logo. AIRTEC part no: ATINTREN7

Read more less

AIRTEC Motorsport hot side boost pipe for Renault Clio. now only available in black Features of hot side: Designed to increase air flow with no kinks and a less restrictive pipe – To fit standard and AIRTEC intercooler kits Will not fit with Ultra racing strut brace (Will require spacers) Only available in Pro-Series Black

Read more less

AIRTEC Motorsport header tank with sight glass for the Renault Clio 200 EDC Available in Motorsport Silver or Pro-Series Black. Comes with standard blue header tank cap. Registered Design Right number: 6059103

Read more less

AIRTEC Renault Clio RS Turbo cooler  – fittings included. AIRTEC’s Clio turbo cooler has been designed to cool the super heated water which comes out of the turbo before it goes back to the water header tank. By fitting a turbo cooler you are increasing the efficiently of your cooling system and which in turn will help lower engine temperature. This product is to be fitted with the AIRTEC intercooler. Approximate dimensions: 195mm width 215mm height 50mm thickness Pipe outlet size are 10mm o.d.  Registered Design Right number: 6023447

Read more less