Airtec

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

AVAILABLE NOW FOR PRE-ORDER! Estimated delivery date Mid – End Jan 2020.   AIRTEC Motorsport HUGE stage 2 front mount intercooler for PUMA MK2 ST   The stage 2 intercooler utilises the large space available to fit neatly behind the front bumper. Suitable for modified PUMA MK2 ST that require the highest level of cooling efficiency and performance for track or fast road use.  

Read more less

AIRTEC Motorsport hot side lower boost pipe for PUMA MK2 ST   Designed to increase airflow on the Fiesta MK8 ST-200 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe.   Features: Swaged ends to prevent blowing of on bigger power cars. Will work perfect with standard or re-mapped Fiesta ST's. To fit with both, stock and AIRTEC intercooler. Resonator delete. Fitting takes less than 30 minutes to install and fits to standard boost hoses.   52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe. AVAILABLE ONLY IN SILVER FINISH Registered Design Right number:

Read more less

Comes standard with new high pressure blue header tank cap! No Drilling required, uses original fixing points and is a direct replacement for the original plastic header tank. This is the ultimate water header tank. AIRTEC part no: ATMSHYU2 TECHNICAL DATA Hyundai I30N Lightweight Alloy Water Header Tank replacement. Easy fit takes 20 to 30 minutes to fit, Comes with a brand New High Pressure blue header tank cap No Drilling required, uses original fixing points and is a direct replacement for the original plastic header tank. Why not cover up that plastic cap with a Polished stainless steel cap cover, finished in satin Black and engraved Hot Logo, grooved inside for that perfect fit. Registered Design Right number: 6082522 AIRTEC part no: ATMSHYU2

Read more less

Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N. Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow.   TECHNICAL DATA Adding to our growing range of performance parts, AIRTEC Motorsport are proud to introduce our big boost pipe kit suitable for the Hyundai I30N. Featuring a larger diameter, freer-flowing design, the boost pipes allow increased air flow. On the hot side, from the turbo to the intercooler, the pipework features a 63mm diameter and on the cold side, from the intercooler to the throttle body, it increases to 70mm to further reduce restriction. The cold side is also a direct fit and match to own upgraded AIRTEC Motorsport intercooler’s outlet size, but can be used on standard intercoolers too. Both pipes are designed to directly replace the OEM boost pipes and come supplied complete with Pro Hoses silicone hose connectors and all required jubilee clips and fittings. AIRTEC part no: ATMSHYU5

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake temperatures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable strength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money   Will fit Abarth 500 / 595 models fitted with the IHI turbo – 135, 140, 145 & 160 bhp models Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm   Registered Design Right number 6023445 This intercooler will fit with the automatic paddle shift gearbox on the Fiat 500 Abarth

Read more less

With ST & RS Tuning being taken to new power levels, there is a real need for upgrading the oil cooler from standard, this Solid Billet alloy plate 'Base over 10mm thick' gives you flexibility in choosing your own oil cooler and position its going to be fitted. Fitting is  easy, remove old water cooled oil cooler and fit new AIRTEC oil cooler plate with existing bolts and install pipe joiner to the 2 x 16mm i.d. water pipes. Note, Alloy pipe Joiner available from options. Anodised Black & Engraved with AIRTEC logo, it may not be seen, but its all in the presentation and we aspect you to take as much pride in building your cars as we do in making our products.

Read more less

AIRTEC Front mount Intercooler Features  1 x Twin pass huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler Comes with full fitting instructions & pipe work  No cutting bumper with our intercooler kit  Un-Beatable value for money Available in Satin Black only Airtec 3 year unlimited mileage warranty Fitting will take 1-2 hours depending on mechanical skill Finished In Pro-Series Satin Black or Natural Silver Proven horizontal 60mm core, runs left to right of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better. Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting. Proven and tested at Collins Performance with great results! Standard intercooler:62 Degrees AIRTEC Stage 1 Intercooler:44 Degrees AIRTEC Stage 2 intercooler:20 Degrees AIRTEC intercooler will fit 100PS / 125PS / 135PS and 140PS (Red and Black) models. Please note: Pipework only available in silver Approximate Dimensions: Thickness – 60mm Width – 525mm Height – 378mm Intercooler Volume Capacity (The amount of charged air that the intercooler can hold)AIRTEC: 3.45 litres AIRTEC part no: ATINTFO47

Read more less