All

TECHNICAL DATA AIRTEC have released their Audi Sport S1 Front Mount Intercooler upgrade to its growing range of performance intercoolers. Audi have made a great job of shoehorning the 2.0 TSI from the Golf GTI into the small chassis of the S1 Unfortunately, due to the size restrictions of the S1, they have made a huge compromise in the intercooler department and the S1 intercooler is a third of the size found in the Golf GTI. Road tests found the standard intercooler was heat soaking (unable to cool the intake temps from turbo) and temperatures rising to 69 degrees which causes the ecu to pull timing out of the map and means a drop in bhp. With the AIRTEC intercooler upgrade fitted, the intake temps didn’t rise above 24 degree’s which means no loss in bhp. Test taken on standard S1 using Snap-on Ethos. We take a huge amount of pride in making sure our kits are finished to an extremely high standard. Why not make your S1 stand out by choosing Super Stealth satin black for a more OEM look or go for the Silver finish for the maximum impact. Great addition to your standard or re-mapped S1. AIRTEC Front mount Intercooler Features 1 x Huge stepped Intercooler core 80mm bottom section and 60mm top section, with flowed cast end tanks, this means less welding and a stronger Intercooler Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Airtec 3 year unlimited mileage warranty Fitting will take 3-4 hours depending on mechanical skill Fits to standard hoses Finished in Pro-Series Satin Black or Natural Silver, please choose from options Optional Airtec logo Approximate sizes 875mm width 200mm height 80mm/60mm thick Airtec Part No: ATINTVAG15

Read more less

TECHNICAL DATA AIRTEC front mount intercooler for the Audi TT 225 only. A great upgrade to any standard or re-mapped Audi TT 225. Comes complete with all alloy hard pipes, Pro Hose silicone hoses and fitting instructions. Comes complete with all alloy hard pipes, Pro silicone hoses and fitting instructions. now only comes in Pro-Series black colour  AIRTEC intercooler sizes: Height 340mm Width 680mm Thickness 60mm Registered Design Right number: 6023257 AIRTEC part no: ATINTVAG14

Read more less

TECHNICAL DATA AIRTEC are proud to introduce the front mount intercooler upgrade for the Audi TT RS (8J). Designed to fit all models, this free-flowing intercooler is a direct replacement for the smaller and more restrictive OEM set up. Featuring a huge 120mm core design together with high-flow, cast end tanks, the AIRTEC intercooler offers much greater surface area, efficiency and volume over standard. Despite this improvement, it fits neatly behind the original bumper and can be used with the original hoses. As with all AIRTEC products, the intercooler was tested back-to-back on the dyno against the OEM item. This showed a huge reduction in air charge temperatures over standard, as seen below: Rolling Road test results – Carried out at AmD Tuning on 11/04/2017 Standard Intercooler: Run 1 – Into intercooler: 117 degrees – Out of intercooler: 69 degrees Run 2 – Into intercooler: 117 degrees – Out of intercooler: 68 degrees Run 3 – Into intercooler: 119 degrees – Out of intercooler: 78 degrees   AIRTEC Intercooler: Run 1 – Into intercooler: 116 degrees – Out of intercooler: 36 degrees Run 2 – Into intercooler: 117 degrees – Out of intercooler: 36 degrees Run 3 – Into intercooler: 118 degrees – Out of intercooler : 37 degrees   The comprehensive fitting kit includes all the correct fixtures and fittings, step-by-step instructions with pictures and should take around 3-4 hours to complete. The intercooler is available in Pro-Series Black finish, with or without the AIRTEC logo. Please note, the original Audi crash bar will need modifying to fit this intercooler upgrade. If you feel your DIY skills are up to the job, this can be cut yourself. Or we can supply a pre-modified crash bar for a charge of £295.   Option 1: Without optional Crash bar – If your DIY skills are up to scratch, why not give it ago yourself Requires existing crash bar to be cut and welded. Option 2: With Crash bar – Modified Crash bar comes powder coated and pre-cut ready to fit – (£295.00)   Features: Designed and manufactured in the UK by AIRTEC AIRTEC logo’d cast end tanks for improved airflow and unbeatable strength Proven reduction in charge temps 3-year unlimited mileage warranty Available in Pro-Series Black AIRTEC logo available at no extra charge Unbeatable value for money! Approximate Dimensions: Width: 540mm Height: 215mm Depth: 120mm AIRTEC part no: ATINTVAG19

Read more less

As part of our expanding BWM product range, AIRTEC Motorsport is proud to launch our 1 & 3-Series diesel intercooler upgrade suitable for track or fast road use. In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item. The designOur solution to increasing the intercooler’s size and performance within the confines of the limited space behind the bumper is based upon a wider, taller core with a huge 150mm depth. This offers a massive 94% increase in overall capacity in comparison to the original intercooler, as well as a significant increase in frontal area over standard, which allows it to make the most of the air flow provided. Together with our high-flow, moulded one-piece cast end tanks to ensure flow is directed correctly and efficiently, the AIRTEC Motorsport intercooler offers much greater efficiency and volume over standard. Available in a high-quality powder coated black finish, the comprehensive kit also comes complete with all fixtures and fittings, as well as detailed fitting instructions. Its proven cooling efficiency increase makes it an essential modification for modified 1 & 3-Series diesel models. DimensionsOEM intercooler                                               AIRTEC Motorsport intercoolerWidth: 520mm                                                  Width: 550mmHeight: 100mm                                                 Height: 110mmDepth: 90mm                                                    Depth:150mmCapacity: 4.7 litres                                            Capacity: 9.1 litresFront area: 5,200cm²                                    Front area: 6,050cm² Inlet and outlets: 62mm FitmentThis intercooler is a replacement for BMW part number 17517524916 and is suited for all models with matching 62mm inlet and outlets. PLEASE NOTE: Later 120d and 320d models have 70mm inlet and outlets and requite this intercooler: AIRTEC Motorsport Front Mount Intercooler for BMW E9X 325D/330D (E-Series) – Auto Specialists If in doubt, please measure the inlet and outlet, or check the part number of your current intercooler by putting the VIN number of your car into BMW Parts Catalog (realoem.com) Fits the following E-Series models:1-Series:2003 to 2011 – 116d/118d2003 to 2007 – 120d 3-Series:2004 to 2011 – 316d/318d2004 to 2008 – 320d X1:2008 to 2015 – 16d/18d Features 94% increase in overall capacity in comparison to original AIRTEC logo cast end tanks for improved air flow and unbeatable strength Increase in frontal area over standard Huge increase in cooling ability Powder coated black finish Includes fittings and fixtures AIRTEC Logo at no extra cost Registered Design Right number: 6049893 AIRTEC Part No: ATINTBMW3

Read more less

AIRTEC intercooler for the E82 BMW 135i, E92 335i and E89 Z4 35i (N54) 60mm thick proven bar and plate core, spec’d to AIRTEC designs AIRTEC logo’d cast end tanks for improved airflow and unbeatable stength Dyno proven power gains Lower intake temps meaning a safer engine 3-year unlimited mileage warranty Available in either Natural Silver or Pro Series Black finishes AIRTEC logo available at no extra charge Unbeatable value for money! Test results Carried out at AmD Essex rolling road. Intercoolers being testing for ACT (Air Charge Temperature) Standard BMW Intercooler (Stage 1 remap). Average air temperature into intercooler: 115 degreesAverage air temp out of intercooler: 69 degrees With intake temps over 60 degrees it is likely that the engine will be pulling back the power AIRTEC Intercooler (Stage 1 remap) Average air temp into Intercooler. 84 degreesAverage air temp out of Intercooler. 36 degrees With lower intake temperatures our AIRTEC intercooler was seeing an increase in power of 17 bhp The increase in power proves just how important it is to have lower intake temperatures and why our AIRTEC intercooler is a must have for any remapped cars Registered Design Right number: 6023245 AIRTEC part no: ATINTBMW2

Read more less

TECHNICAL DATA Great upgrade for all Corsa D’s with remapped ECU software. Works well on standard cars too! AIRTEC Front mount intercooler kit includes these parts & features 1 x Huge 80mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler ‘same a VXR design’ High quality 4/5ply silicone hoses with alloy joiners & stainless Jubilee clips Powder coated standard intercooler support brackets Retains original fog lights without any modification Very minor trimming to back of bumper Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Satin Black or Natural Silver Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Only available in Pro-Series Black AIRTEC part no: ATINTVAUX8

Read more less

TECHNICAL DATA Designed to work with re-mapped Ecu for best results Finished In Pro-Series Satin Black or Natural Silver Removes restrictive OE Vauxall Intercooler, which suffers from heat soak on tuned cars. Great upgrade for all 1.4T with remapped ECU, perfect for Fast Road and Track use. AIRTEC has released their Corsa E 1.4T intercooler upgrade combing great quality at a reasonable price. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 80mm core intercooler with flowed cast end tanks, this means less welding and a stronger intercooler, utilising the same design as our replacement for the VXR. High quality 4/5ply silicon hose’s with alloy joiners & stainless Jubilee clips Powder coated standard intercooler support brackets Retains original fog lights without any modification Very minor trimming to back of bumper Fitting Instructions and all required fixings Un-Beatable value for money Proven Power Increase’s for Fast Road & Track Available in Pro-Series Black Airtec 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Registered Design Right number: 6023249 AIRTEC part no: ATINTVAUX9

Read more less

The AIRTEC intercooler is the answer for any standard or remapped BMW.AIRTEC’s BMW diesel intercooler upgrade is made with our proven 110mm Bar ‘n’ Plate design core and dramatically reduces air charge temperatures found on tuned diesel BMWs.Manufactured & fabricated in the UK at AIRTEC HQ.The upgrade comes with all required brackets and fixings, and full fitting instructions for easy installation.Features: 110mm thick proven bar and plate core, spec’d to AIRTEC designsAIRTEC logo’d cast end tanks for improved airflow and unbeatable strengthDyno proven power gains (results coming soon)Lower intake temps meaning a safer engine3-year unlimited mileage warrantyAvailable in Pro-Series Black finishAIRTEC logo available at no extra chargeUnbeatable value for money! Approximate Dimensions:Height 140mmWidth 676mm (Not including pipes)Core Thickness 110mmAIRTEC part no: ATINTBMW1

Read more less

Replaces very restrictive original twin intercooler setup with lengthy pipework, with an AIRTEC design high flow 60mm core intercooler and a shorter alloy boost pipe kit. We keep fast turbo spool up by using 50mm pipework from turbo to intercooler and 60mm out of the intercooler to help match the throttle body, this combination gives fast turbo spool up coupled with maximum power output. Dyno test results – results taken from Fiat 500 Abarth, fitted with cat back exhaust and AIRTEC FMIC Run 1.  120 degree into the intercooler and 22 degree out of the intercooler Run 2.  122 degree into the intercooler and 22 degree out of the intercooler Run 3.  123 degree into the intercooler and 22 degree out of the intercooler The AIRTEC intercooler dropped the intake tempertures by 100 degree on each run and did not suffer from heat soak Features:     60mm thick proven bar and plate core, spec’d to AIRTEC design     AIRTEC branded cast end tanks for improved air flow and unbeatable stength     Dyno proven to provide lower intake temps and gain BHP     Shorter charge pipes than standard twin intercooler set-up, shorter pipes mean faster turbo spool up     Fitting takes approximately 2-3 hours     3 year unlimited mileage warranty     Available in Pro-Series Black     AIRTEC Logo available at no extra charge     Unbeatable value for money   Will fit any Abarth with Garrett GTI446 Turbo – 165, 180 & 190 bhp models Will fit the following: Series 3 180 Competizione (Mid-Late 2015)Series 4 TurismoSeries 4 Competizione Approximate dimensions: Height – 205mm Width – 820mm Depth – 65mm   Registered Design Right number 6023445

Read more less

AIRTEC front mount intercooler for the Fiat Punto Abarth. Great addition to any standard or remapped Puntos. Replaces original restrictive 50mm core intercooler for AIRTEC’s high flow 60mm core intercooler Airtec Intercooler dimensions: Height – 205mm Width – 820mm Thick – 65mm Registered Design Right number: 6022629 AIRTEC part number: ATINTFT2

Read more less

AIRTEC front mount intercooler for the Focus ST MK3 Diesel. Designed to keep air shutters in place, to prevent cooling fans running on. Intercooler made to order, please allow 7-10 days. Approximate dimensions: Width 936mm Height 160mm Thickness ‘core’ 70mm available in black only  Registered Design Right number: 6022639 AIRTEC part no: ATINTFO43

Read more less

TECHNICAL DATA AIRTEC has now added a great addition to it’s growing range of performance intercoolers, in the way of this upgraded intercooler for the Volkswagen Golf VI, 2.0 Common Rail Please note: This intercooler will only fit the 2.0L CR engine not PD. Great addition to any standard or re-mapped Golf. AIRTEC Front mount Intercooler kit Includes these parts & Features 1 x Huge 60mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler. High quality gloss black silicon hoses which means better flow inside the pipe work, finished stainless Jubilee clips. Retains original crash bar. Retains original fog lights. No cutting to bumper. Fitting Instructions and all required fixings. Proven Power Increase’s for Fast Road & Track. Available in Satin Black or Natural Silver. Airtec 3 year unlimited mileage warranty. Fitting will take 2-4 hours depending on mechanical skill. Fits all Mk6 CR140 Golf. This is essential for hotter climate countries. Approximate Dimensions Width – 740mm ‘not including pipe’ Height – 170mm Thick – 70mm Registered Design Right number: 6023454 AIRTEC part no: ATINTVAG21

Read more less