Performance - Audi S1 8X (2010-2018)

P3 V3 OBD2 Gauge Basic Features Plug and Play Install - plugs directly into your OBD2 port (Want to keep your OBD2 port open? The P3 hard-wire harness kit also available) OEM Integration - installs in your vent for a sleek install while retaining air flow Versatility - read boost from multiple OEM sensors through OBD2 port or using optional P3 analogue boost sensor Code Reading/Clearing - read and clear diagnostic trouble codes (DTCs) on the fly P3 V3 Gauge Readouts (all readouts can be individually configured to read in either Imperial or Metric units) Boost (via OBD2 port using OEM sensors or P3 analogue boost sensor) Coolant temperature Air/Fuel ratio (AFR or Lambda) Vehicle speed (can be calibrated in 1% increments from -9% to +20%) Intake air temperature Throttle angle Ignition timing Engine RPM Exhaust gas temperature Battery voltage Programmable shift light analogue input 1 (brown wire) can allow gauge to read any 0-5 volt linear output sensor analogue input 2 (blue wire) can allow gauge to read any 0-5 volt linear output sensor Acceleration timers (0-60mph/0-100mph/60-130mph) Braking timers (60-0mph/100-0mph) Optional Add-Ons P3 analogue Boost sensor - plugs directly into gauge harness, no wiring required) Boost tubing kit - Approx. 5' of 5/32" O.D. flexible plastic boost tubing with vacuum "T" and 3 sections of 5/32" I.D. vaccum hose. Includes 3 zip ties P3 ESVA (Ethanol Sensor Voltage Adaptor) allows your gauge to read ethanol content and fuel temperature directly from the common Continental/GM flex fuel sensor. *Ethanol sensor NOT included Trim Removal Kit - this tool kit will help you remove your vent and interior trim while minimizing the chance of scratching or damaging your trim OBD2 Splitter - attach multiple devices to your OBD2 port. *some devices will not function while another device is attached to the OBD2 port

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type AUDI S1 8X 2.0 Turbo 230 2014-2018 PR-1LJ 112mm pcd ATE

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport is proud to launch our uprated lower gearbox mount upgrade suitable for track or fast road use. This is designed to directly replace the original lower gearbox mount that is made from cast aluminium with a soft rubber bush insert. Our AIRTEC Motorsport heavy duty replacement is machined from billet aluminium and comes in a high-quality, anodised black finish with engraved logo. Accompanying the mount is a much stiffer Purple polyurethane bush insert that radically reduces engine movement. As a result, throttle response is improved, wheel hop is reduced and gear changes feel more instant as excessive slack is removed from the driveline. The mount uses the original bolts and comes complete with fitting instructions. Features: CNC machined from solid billet aluminium High-quality anodised black finish Engraved AIRTEC Motorsport logo Reduces engine movement and wheel hop on hard acceleration Faster gear changes and improved throttle response Direct replacement for original cast aluminium and rubber insert Uses original fixtures and fittings and comes with instructions Please note: Uprating the torque mount to a stiffer busing will increase noise and vibration within the cabin. AIRTEC part no: ATMSVAG17  

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Audi S1 performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which makes the system louder as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Media Example of Audi S1 sports exhaust (Cat-back - Resonated).   Example of Audi S1 sports exhaust (Cat-back - Non-Resonated). Example of Audi S1 performance exhaust (Cat-back - Non-Resonated with sports cat front pipe). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

supplied with replacement solenoid and has lower profile than T9351   The T9481 is a performance blow-off valve solution for the late-model VW, Audi, SEAT and Skoda vehicles. In summary, if you know your GFB valves, this is the same as the T9451 VTA but with an integrated solenoid valve for a lower stack height and greater engine bay clearance. If you want sound with your performance (or performance with your sound!), GFB’s T9481 VTA delivers! By combining atmosphere venting with the proven performance benefits of our ground-breaking DV+, the VTA delivers an aggressive blow-off sound, improved throttle response, as well as superior boost holding and reliability. With its low-profile integrated solenoid and compact design, installing the T9481 is a breeze. Just swap out your factory diverter valve with the VTA, and you’re good to go. Reliable Boost HoldingDespite some improvements in reliability by the latest generation of OEM diverter valves, the performance trade-offs remain. There is no escaping the fact that the moulded plastic valve mechanism of the OEM valve cannot reliably seal boost pressure. The VTA’s CNC-machined aluminium and brass valve components, combined with a Viton face seal ensure reliable boost holding even up to 50psi. Sharper Throttle Response, Faster Boost RecoveryOEM electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response. GFB’s patented “pilot actuation” system allows the VTA’s piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response. Unrivalled longevity, backed by our Lifetime WarrantyThe combination of precision manufacturing, attention to detail, and robust materials means the VTA will last a lifetime. So does the warranty. Why choose a VTA over a "BOV spacer"?Whilst “BOV spacers” might offer a cheap way to get a blow-off sound, they fail to tackle the fundamental performance and reliability issues associated with the OEM diverter valve - all they do is redirect the vented air. The VTA offers more than just sound. By replacing the OEM diverter valve you also get enhanced performance and reliability. FITS: Make Model Mark Variant Audi A1 8X1 3-Door Hatchback S1 quattro Audi A3 MK2 8P1 3-Door Hatchback 1.8 TFSI Audi A3 MK2 8P1 3-Door Hatchback 2.0 TFSI quattro Audi A3 MK2 8P1 3-Door Hatchback S3 quattro Audi A3 MK2 8P7 Cabriolet 1.8 TFSI Audi A3 MK2 8P7 Cabriolet 2.0 TFSI Audi A3 MK2 8PA 5-Door Sportback 1.8 TFSI Audi A3 MK2 8PA 5-Door Sportback 2.0 TFSI Audi A3 MK2 8PA 5-Door Sportback 2.0 TFSI quattro Audi A3 MK2 8PA 5-Door Sportback RS3 quattro 2.5 TFSI Audi A3 MK2 8PA 5-Door Sportback S3 quattro Audi A3 MK3 8V1 3-Door Hatchback 1.8 TFSI Audi A3 MK3 8V1 3-Door Hatchback 1.8 TFSI quattro Audi A3 MK3 8VA 5-Door Sportback RS3 quattro Audi A3 MK3 8VS Saloon / Limousine 1.8 TFSI Audi A3 MK3 8VS Saloon / Limousine 1.8 TFSI quattro Audi A4 B6 & B7 Cabriolet 2.0 TFSI 16V Audi A4 B7 Avant 2.0 TFSI Audi A4 B7 Saloon / Limousine 2.0 TFSI Audi A4 B8 Avant 1.8 TFSI Audi A4 B8 Avant 1.8 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI quattro Audi A4 B8 Avant 2.0 TFSI quattro Audi A4 B8 Saloon / Limousine 1.8 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI quattro Audi A4 B8 Saloon / Limousine 2.0 TFSI quattro Audi A4 B9 Avant 2.0 TFSI Audi A4 B9 Avant 2.0 TFSI Audi A4 B9 Saloon / Limousine 2.0 TFSI Audi A4 B9 Saloon / Limousine 2.0 TFSI quattro Audi A5 8F7 Cabriolet 1.8 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI quattro Audi A5 8F7 Cabriolet 2.0 TFSI quattro Audi A5 8T3 Coupé 1.8 TFSI Audi A5 8T3 Coupé 2.0 TFSI Audi A5 8T3 Coupé 2.0 TFSI quattro Audi A5 8TA Sportback 1.8 TFSI Audi A5 8TA Sportback 2.0 TFSI Audi A5 8TA Sportback 2.0 TFSI Audi A5 8TA Sportback 2.0 TFSI quattro Audi A5 8TA Sportback 2.0 TFSI quattro Audi A6 C6 Avant 2.0 TFSI Audi A6 C6 Saloon / Limousine 2.0 TFSI Audi A6 C7 Avant 2.0 TFSI Audi A6 C7 Saloon / Limousine 2.0 TFSI Audi Q5 8RB 2.0 TFSI quattro Audi TT MK2 Coupé 8J 2.0 TFSI Audi TT MK2 Coupé 8J 2.0 TFSI Audi TT MK2 Coupé 8J 2.0 TFSI quattro Audi TT MK2 Coupé 8J 2.0 TTS quattro Audi TT MK2 Roadster 8J 2.0 TFSI Audi TT MK2 Roadster 8J 2.0 TFSI Audi TT MK2 Roadster 8J 2.0 TTS quattro Seat Alhambra 710, 711 1.8 TSI Seat Leon MK2 2.0 TFSI Seat Leon MK2 2.0 TFSI Cupra Seat Leon MK2 2.0 TFSI FR Skoda Octavia MK2 2.0 vRS Skoda Octavia MK2 2.0 vRS Skoda Octavia MK3 1.8 TSI Skoda Octavia MK3 1.8 TSI Skoda Octavia MK3 1.8 TSI 4x4 Skoda Octavia MK3 2.0 TSI RS Skoda Octavia MK3 2.0 TSI RS Skoda Octavia MK3 2.0 TSI vRS Skoda Octavia MK3 2.0 TSI vRS Skoda Octavia MK3 2.0 TSI vRS Volkswagen Beetle 5C1 2.0 TSI Volkswagen Beetle 5C1 2.0 TSI Volkswagen Beetle 5C7 2.0 TSI Volkswagen Beetle 5C7 2.0 TSI Volkswagen Golf MK5 2.0 GTI Volkswagen Golf MK5 2.0 GTI Edition 30 Volkswagen Golf MK6 2.0 GTI Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK7 2.0 GTI Volkswagen Jetta MK5 2.0 TFSI Volkswagen Jetta MK6 2.0 TSI Volkswagen Passat B6 2.0 FSI Volkswagen Passat B6 2.0 FSI Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 TSI Volkswagen Scirocco MK3 2.0 TSI Volkswagen Tiguan 5N 2.0 TFSI 4motion Volkswagen Tiguan 5N 2.0 TFSI 4motion Volkswagen Tiguan 5N 2.0 TSI 4motion Volkswagen Tiguan 5N 2.0 TSI 4motion

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

As part of our expanding Audi platform product range, AIRTEC Motorsport is proud to launch our intake kit for the S1 model, suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay. Having previously designed a number of enclosed induction kits for other performance models, we were keen to develop an intake package for the S1 model to offer significant improvements. Featuring a huge, free-flowing cotton air filter that is housed inside the original air box bottom half with an enlarged, three-piece laser cut lid. This allows the air filter sufficient space whilst retaining the original front air feed. The kit also includes a unique larger intake pipe that measures 80mm in diameter before gently tapering down to the meet the original turbo elbow. The larger capacity pipe also features a reduced, smoother angle to further improve internal flow. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Features: Comprehensive induction kit designed specially for the S1 platform Large cotton air filter for improved flow and increased performance Uses original air box base with enlarged three-piece laser cut lid Retains original front intake to direct constant feed of cold air to the filter Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish Includes all fixtures and detailed fitting instructions  Registered Design Right number: Application Pending AIRTEC Part No: ATIKVAG12

Read more less

REAR UPPER WISHBONE INNER BUSH PFR85-514   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

3D / 4D Number Plate frames! These are an Acrylic frame that your number plate sits in to add a bit of style to your car! Made up of 3 pieces to give a full customised number plate holder! Backing Base Plate Frame Surround Coloured insert with or without logo! Price is for One Frame - if you would like front and rear, please order QTY x2 You choose the following 3 options: The colour of your Insert Which logo you want - If Any The colour of your logo! The frame of the plate is always provided in BLACK. The logo is cut out of the insert - then a second coloured logo of your choise is inserted into the gap to give it a fully smoth and professional finish! How it works? Simply insert your number plate inside the frame using either a gel or foam double sided tape - then attach the frame to your car. These are suitable for front and rear number plates. Due to the nature of acrylic, its difficult to drill without it cracking so the frame needs to be stuck to the vehicle. We do offer a full fitting kit as well which is smaller double sided acrylic rectangles that attach to the back side of the frame and again to the car. Fitment: Please be aware these require a FLAT SURFACE to be adhered to, For the rear which has the beveled recesses for the holes our fitting kit will allow fitment, however, due to their weight and inability to be drilled you will struggle to insert these plates over say a honeycomb or mesh grill. In these instances it may be worth just ordering for the rear!  It is important you fully prepare the area before sticking these in place to prevent loss. If the plate falls off your vehicle and is damaged or lost sadly this is not covered under warranty. If you require any customisation please get in touch via Email or Whatsapp, If we can do this - we will. This may incur additional costs however!

Read more less

Fits: S1 (8X Chassis). Model: 2015 - 2018. 4 Line set. Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport is proud to launch our S1 oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the S1 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features:  Kit developed specifically for the S1 8X (Still unconfirmed on GB Models) Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide   AIRTEC part no: ATMSVAG15

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Please allow 4-5 weeks from order due to new end tank design. Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our Stage 2 front mount intercooler kit with integrated crash bar design (Replaces the stock crash bar) aimed at modified Audi S1 owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. The finished design features 60mm inlet and outlets that flow freely through custom end tanks into a 80mm – 60mm deep, single-pass stepped core. By integrating the crash bar into the design, the intercooler makes full use of the vehicle’s entire front grille area while still retaining the towing eye feature. It therefore offers a huge increase in surface area and volume over standard, and radically reduces charge temperatures, which is suited for highly modified examples with higher boost pressures and capable of supporting over 500bhp. It fits neatly behind the original bumper with no modifications required to fit and the comprehensive kit includes AIRTEC Motorsport’s CAD designed end tanks, laser-cut brackets, and all fixtures and fittings for a direct, bolt-on installation. Its proven cooling efficiency and straight forward fitment makes it an essential modification for all modified Audi S1s. AIRTEC intercooler features: Proven race quality bar and plate core Stepped core design, 80mm – 60mm 60mm inlet and outlets CAD designed end tanks to optimise air flow Comes complete with full fitting instructions Proven power increases and cooling efficiency Towing eye feature retained Replacement silicone hose for headlight washer jet Available in Pro Series Black only Please note: Cutting to lower radiator surround is required to fit. Please note: Integrated crash bar replaces the stock crash bar – Not declaring modifications can void vehicles insurance. Registered Design Right number: 6082520 AIRTEC part no: ATINTVAG35

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

The All new Enhanced Edition sequential indicator unit from CEUK for the A1/S1 8X A fine complement for our LED front and rear indicator offerings  Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Once your indicator ignites, the led strip built into the housing strobes from left to right giving a sequential look to it! Superior quality to overseas counterparts E Marked Fitment: 2010-2018 Audi A1 8X 2010-2018 Audi S1 8X Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.    

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required.  Confirmed applications VWR900000 – BLUE  I   VWR900001 – RED  I  VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4  2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 ​ Sold individually.  Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021

Read more less