Manufactured from fibreglass and comes pre finished and sprayed in a gloss black paint.
This spoiler lip requires bonding on using a polyuerthane adhesive (such as tigerseal).
Manufactured from Lloyds approved Grp materials to a very high standard.
This product comes in Gloss black exactly as pictured with all fixings required.
Manufactured from Lloyds approved Grp materials to a very nigh standard.
This product comes in Gloss black exactly as pictured with all fixings required.
Manufactured from Lloyds approved Grp materials to a very high standard.
This product comes in Gloss black exactly as pictured with all fixings required.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper
Our Focus MK3 RS V2 front splitter, Specifically styled design that follows the curves and angles of the RS's front bumper. The V2 Splitter is designed to sit higher than our original RS splitter making it a more practical option for the Lowered RS.
This product is manufactured utilising time proven composite technology.
They are supplied as pictured in a gloss black gell coat ready to fit.
The splitter is supplied with a full stainless steel fitting kit.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.
Our Focus MK3 RS front splitter, Specifically styled design that follows the curves and angles of the RS's front bumper. This splitter will add around 2" to the centre section of the bumper, giving the front end the well suited low agressive look.
This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.This product is supplied with a laser cut bracket to support the middle of the splitter.
Our fog light extension are the perfect way to give your ST's front end a little more agression.These are manufactured in Nylon12 and supplied in a mottled charcoal/black as in the latter pictures.We advise that these are bonded using a polyurethane adhesive such a as tiger seal for maximum safety and securityThese can be painted if required by a bodyshop.
Manufactured from Lloyds approved Grp materials to a very high standard.
This product comes in finished in a gloss black gel coat exactly as pictured with all fixings required.
NEW AND IMPROVED FITMENT!
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.
This product is supplied with fixings and is a simple direct fit.Please note if your ST is running our splitter this will need to be removed for install of the chin lip.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper
Our Focus MK3.5 ST front splitter, Specifically styled design that follows the curves and angles of the front bumper. This splitter finishes of the front end perfectly with its added depth that the ST should have come with from factory.
This product is manufactured utilising time proven composite technology.
They are supplied as pictured in a gloss black gell coat ready to fit.
The splitter is supplied with a full stainless steel fitting kit.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper
Our Focus MK3.5 ST front splitter, Specifically styled design that follows the curves and angles of the front bumper. This finishes of the front end perfectly with its added depth that the ST should have come with from factory.
This product is manufactured utilising time proven composite technology.
This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.
Manufactured from Lloyds approved Grp materials to a very high standard.
This product comes in Gloss black exactly as pictured with all fixings required.
The spoiler lip comes in a sprayed gloss back finish ready to fit
For fitting this requires bonding on using a polyuerthane adhesive (such as tigerseal).
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.
It comes with a full stainless steel fitting kit and is a simple direct fit.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper
Our Focus MK3 PFL front splitter, Specifically styled design that follows the curves of the front bumper. This splitter finishes the front end perfectly with the added depth that the Focus ST should have come with as standard.
This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.
Manufactured from Lloyds approved Grp materials to a very high standard.
This product comes in Gloss black exactly as pictured with all fixings required.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper
Our MK3.5 Focus ST-Line front splitter, Specifically styled design that follows the curves and angles of the front bumper.
This product is manufactured utilising time proven composite technology.
They are supplied as pictured in a gloss black gell coat ready to fit.
The splitter is supplied with a full stainless steel fitting kit.
Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.
These Brows will fit all Focus MK3 (pre-facelift headlights)
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.We advise to use a small amount of polyurethane adhesive (such as tigerseal) to help secure the brows when fitting.
Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.
These Brows will fit all Focus MK3 (pre-facelift headlights)
Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.We advise to use a small amount of polyurethane adhesive (such as tigerseal) to help secure the brows when fitting.
Manufactured from Lloyds approved Grp materials to a very high standard.
This product comes in Gloss black exactly as pictured with all fixings required.
Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.
Our MK3 ZS front splitter, Specifically styled design that follows the curves and angles of the front bumper. This splitters added groves exagerrate the existing profiles of the front bumper.
This product is manufactured utilising time proven composite technology.
They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.
As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Mk3 Focus ST and RS owners who want to further improve the performance and potential of their cars for track or fast road use.
Direct Replacement FitDesigned to fit both the 2.0-litre ST and 2.3-litre RS models, the manifold is a true direct replacement that utilises all of the original fixtures and fittings, including the standard throttle body and therefore pipework.
There are also provisions to fit either the original plastic engine cover or the AIRTEC Motorsport replacement engine cover, and the design also includes a moulded fixing tab to secure the vacuum line, as per the original.
The comprehensive fitting kit includes a thermal gasket to help reduce heat transfer from the cylinder head, together with all fixtures and fittings, new rubber gaskets as well as detailed installation instructions.
Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black with a raised AIRTEC Motorsport logo, for a neat OEM+ look to improve the appearance of the engine bay.
The design also offers improved flow compared to the original, which in-turn offers a notable increase in throttle response. Remapping is not necessary after fitting, but for optimal gains there would be a benefit.
A key feature of the manifold is its ability to allow an easy solution for extra fuelling capabilities, thanks to the four port injector bosses and fuel rail fittings. This allows additional fuel to be easily added for big power builds without having to use an inlet manifold port injector spacer. Please note: we do not currently supply a direct fit fuel rail but the option will be available in the future.
Features:
True direct replacement fit that requires no additional parts
Cast aluminium construction for improved strength
Extra fuelling capabilities with port injection bosses
Improved flow and increased throttle response
Finished in a high-quality black powder coat
Includes all fixtures and fittings required to fit
Detailed installation instructions included
AIRTEC part no: ATMSFO151
Street PRO Side Skirts Diffusers Ford Focus RS Mk3
FITS ONLY:Ford Focus RS Mk3 (2015-2018)
COMPLETE SET CONTAINS:
§ Maxton Racing Side Skirts Diffusers
§ Mounting kit
Maxton Racing properties include:
§ A more durable material; 10 mm thick ABS plastic.
§ Increased impact and scratch resistance.
§ New designs, providing a new unique style.
§ UV protective coating.
§ Temperature/weather resistant.
§ Products arrive with protective film vacuum sealed to it.
§ No painting required.
§ Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core.
§ If you decide to paint the product, primer must be used first.
§ Parts are labelled confirming authenticity and quality of the product.
This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).
