Performance - Ford Focus MK3 (2010-2018)

Manufactured from fibreglass and comes pre finished and sprayed in a gloss black paint. This spoiler lip requires bonding on using a polyuerthane adhesive (such as tigerseal).

Read more less

Manufactured from Lloyds approved Grp materials to a very high standard. This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

Manufactured from Lloyds approved Grp materials to a very nigh standard.  This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

Manufactured from Lloyds approved Grp materials to a very high standard.  This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK3 RS V2 front splitter, Specifically styled design that follows the curves and angles of the RS's front bumper. The V2 Splitter is designed to sit higher than our original RS splitter making it a more practical option for the Lowered RS.    This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.   Our Focus MK3 RS front splitter, Specifically styled design that follows the curves and angles of the RS's front bumper. This splitter will add around 2" to the centre section of the bumper, giving the front end the well suited low agressive look.   This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.This product is supplied with a laser cut bracket to support the middle of the splitter.

Read more less

Our fog light extension are the perfect way to give your ST's front end a little more agression.These are manufactured in Nylon12 and supplied in a mottled charcoal/black as in the latter pictures.We advise that these are bonded using a polyurethane adhesive such a as tiger seal for maximum safety and securityThese can be painted if required by a bodyshop.

Read more less

Manufactured from Lloyds approved Grp materials to a very high standard.  This product comes in finished in a gloss black gel coat exactly as pictured with all fixings required.

Read more less

NEW AND IMPROVED FITMENT!   Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.   This product is supplied with fixings and is a simple direct fit.Please note if your ST is running our splitter this will need to be removed for install of the chin lip.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK3.5 ST front splitter, Specifically styled design that follows the curves and angles of the front bumper. This splitter finishes of the front end perfectly with its added depth that the ST should have come with from factory.   This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK3.5 ST front splitter, Specifically styled design that follows the curves and angles of the front bumper. This finishes of the front end perfectly with its added depth that the ST should have come with from factory.   This product is manufactured utilising time proven composite technology.  This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Manufactured from Lloyds approved Grp materials to a very high standard.  This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

The spoiler lip comes in a sprayed gloss back finish ready to fit For fitting this requires bonding on using a polyuerthane adhesive (such as tigerseal).

Read more less

Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.  It comes with a full stainless steel fitting kit and is a simple direct fit. 

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our Focus MK3 PFL front splitter, Specifically styled design that follows the curves of the front bumper. This splitter finishes the front end perfectly with the added depth that the Focus ST should have come with as standard.   This product is manufactured utilising time proven composite technology.This splitter is supplied as pictured in a gloss black gell coat, along with a comprehensive stainless steel fixing kit, Branded with our TRC gel badge, ready to fit.

Read more less

Manufactured from Lloyds approved Grp materials to a very high standard.  This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper   Our MK3.5 Focus ST-Line front splitter, Specifically styled design that follows the curves and angles of the front bumper.   This product is manufactured utilising time proven composite technology. They are supplied as pictured in a gloss black gell coat ready to fit.   The splitter is supplied with a full stainless steel fitting kit.

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   These Brows will fit all Focus MK3 (pre-facelift headlights)  Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.We advise to use a small amount of polyurethane adhesive (such as tigerseal) to help secure the brows when fitting.

Read more less

Our brows are now manufactured using a new process to insure they are one of the thinnest available on the market today. They measure between 1-1.5mm, thus preventing 'bonnet rub'.   These Brows will fit all Focus MK3 (pre-facelift headlights)  Manufactured from fibreglass and supplied as pictured in a gloss black gell coat ready to fit.We advise to use a small amount of polyurethane adhesive (such as tigerseal) to help secure the brows when fitting.

Read more less

Manufactured from Lloyds approved Grp materials to a very high standard.  This product comes in Gloss black exactly as pictured with all fixings required.

Read more less

Definition of a front splitter - Front splitters are essential aerodynamic components that serve to balance the front vs. rear distribution of downforce. A splitter is typically found on the front-end of a race car, appearing as a flat extension to the very bottom of the front bumper.   Our MK3 ZS front splitter, Specifically styled design that follows the curves and angles of the front bumper. This splitters added groves exagerrate the existing profiles of the front bumper.   This product is manufactured utilising time proven composite technology.   They are supplied as pictured in a gloss black gell coat ready to fit. The splitter is supplied with a full stainless steel fitting kit.

Read more less

Street PRO Side Skirts Diffusers Ford Focus RS Mk3 FITS ONLY:Ford Focus RS Mk3 (2015-2018) COMPLETE SET CONTAINS: §  Maxton Racing Side Skirts Diffusers §  Mounting kit   Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).  

Read more less

Front Splitter V.6 Ford Focus ST Mk3 Facelift FITS ONLY:Ford Focus ST Mk3 Facelift (2015-2018) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox  

Read more less

Side Skirts Diffusers V.3 Ford Focus ST Mk3 FITS ONLY:Ford Focus ST Mk3 Facelift (2015-2018)Ford Focus ST Mk3 (2012-2015) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox  

Read more less