Performance - Volkswagen Arteon (2017-Present)

VWR 'Cup Edition' EVO 8.5 x 18" Alloy Wheels RacingLine's 'Cup Edition' EVO 8.5 x 18" alloy wheel has been developed for our track and race cars to give a track-orientated rim that's both ultra-strong yet light. Why choose 'Cup Edition' EVO? The VWR ‘Cup Edition’ EVO 18" Alloy Wheel has been a favourite for a decade for race and track cars to deliver an ultra-strong yet lightweight rim capable of repeatedly coping with the extreme demands that track driving brings. Developed direct from our racing programme, this exact family of VWR 'Cup Edition' EVO Alloy Wheels is based on the rims used in the Volkswagen Racing Cup and the British Touring Car Championship.  Now, our Cup Edition EVO wheel updates this classic design with lighter weight, a fresh new appearance and stunning detailing. The perfect track dimensions for MQB/MQBE of 8.5 x 18" diameter with an ET45 offset. Finished in a choice of stunning hard-wearing Satin Gunmetal Grey, Gloss Black, Matte Bronze or Motorsport White, all complete with RacingLine centre cap. Produced to the highest standards, developed and manufactured to exceed OEM standards. PERFECT FITMENT Fitment offset of ET45 for many VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD. LIGHT : STRONG Weighing 9.7kg / 21.3lbs per wheel, whilst crucially still retaining the strength needed for the demands of road or track. IDEAL FOR TRACK The choice of 18" rim is ideal for track use, allowing a higher, squarer tyre fitment without the risk of excessive rubbing. Precision engineered for Perfect Performance. Max. wheel load of 560kg tested to ISO 7141 for geometric accuracy, impact strength, structural fatigue and load rating requirements Knurled bead seats to prevent tyre slip/rotation Weight removed from the mounting face including drainage cutouts to ensure no trapped water or debris between wheel and hub face causing long term corrosion Choice of four durable finishes to look good, and stay looking good Confirmed applications. Fitment for all VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD: VWR610008 18 x 8.5 ET45 Gunmetal Grey   VWR610009 18 x 8.5 ET45 Motorsport White​ ​VWR610010 18 x 8.5 ET45 Gloss Black   VWR610011 18 x 8.5 ET45 Matte Bronze For motorsport use (eg. for vehicles with additional camber for arch clearance) we also offer an ET35 offset in Gunmetal Grey. VWR610100 18 x 8.5 ET35 Gunmetal Grey > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi SQ2 2018+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013   Strength matters. With a load rating of 560kg per wheel, these Cup Edition EVO wheels have the strength to cope with repeated, harsher track use.  It's essential for the rim to have this sort of strength engineered-in from the start. Just imagine the 'spike loads' running through a wheel hitting circuit kerbing (such as sausage kerbs) through a corner at speed. Obsessive weight saving. We've put a lot of development time into weight reduction, but without compromising strength. Incorporating cut-outs in the mounting face, material removal in the front and back of each spoke, even a groove running around the outer rim to save a few more grams. ​Knurled tyre bead seat. Another nice new feature incorporated into the design are knurled strips on the outer barrel of the wheel where the tyre bead seats.    A true motorsport feature that prevents unwanted tyre slip or rotation on the rim in extreme use. The result? 9.7kg / 21.3lbs per wheel, yet still retaining a load rating of 560kg.

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

Product Description Average gains of 5.5bhp Gains of 16bhp at peak and average of 10bhp from 4500rpm when coupled with FMTIA5/9 Average gain of 20NM of torque Prepreg 2x2 twill formed carbon fibre Dyno proven Great induction noise More responsive throttle Lifetime Warranty Compatible Vehicles: Audi A3 1.8/2.0 TSI 2015 Onwards S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) TT Mk2 2.0 TTS Mk3 8S (2014-2021) Mk3 8S 316bhp (late 2022-) Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020   Skoda Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) With the release of the VW Golf MK8 R, the development team at Forge Motorsport knew that there would be a great opportunity to help the EA888 engine breathe easier and make more power. We were lucky to get one of the first MK8R’s to enter the UK and used this opportunity to put months of development and testing into this new induction kit. Our MK8 Golf R has been put through countless hours of track day work and hill climbs, alongside the usual daily and spirited driving. This kit has been designed from the ground up, using 3D Scanning, FEA Simulation data in SolidWorks CAD, 3D printed development, and numerous dyno sessions to truly unlock the power. Simulation testing played a large part in the design process to help maximise the airflow. This included a tear drop cavity around the bonnet release mechanism to ensure that the airflow stays fast and laminar on its way to the filter element. The 3D printed prototypes helped with comparing our simulation testing to real world driving conditions. This is a valuable comparison that is used in the top tiers of motorsport, now being brought to your vehicle. During the final prototypes testing we found that the Forge induction kit with stock turbo inlet produced gains on average of 5.5BHP. However, when paired with our Turbo Inlet Adaptor FMTIA5/9 this is where the stock EA888 engine saw impressive gains, increasing power up to 16BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 10BHP, while the drivability and the punch from extra torque increases can be felt on the road as between 4000RPM to the rev limit an average gain of 20NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power. This induction kit runs the full width of the slam panel, incorporating an elegant lip which neatly slides under the slam panel to ensure that all the cold air from the front of the vehicle flows through into the inlet tract with no detriment from the engines heat. During testing we found this to make a significant increase to airflow and a reduction to inlet air temperatures (IAT’s). Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of the engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level; which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder (providing the correct amount of fuel is added) - this equates to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance of their car when tuning to stage 1, stage 2, and beyond. Not only do you get the bhp performance benefits, but INDK40 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development have gone into this extraordinary performance induction kit. FMINDK40 is part of our acclaimed Hi Flow range and will ensure that your vehicle is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. You can find a replacement filter here. *Please note - the filter is excluded from the Forge lifetime warranty*

Read more less

Fits GPF models only. Sports Cat option includes 4.5" (114.3mm) 200 cell high flow sports catalyst. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. The sports cat option has been designed with a 4.5 in/114.3mm 200 cell high flow sports catalyst, maximising the flow rates and optimising the tuning potential of VW's high performance fastback coupe. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory.  Please note: IMPORTANT: This exhaust removes the PPF (Petrol Particulate Filter) and will require engine tuning at time of fitment to cancel the EML light. Please note: This product fits to O/E Cat Back exhaust only. Fitment is for motorsport and off road use only as this system removes the PPF filter. Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video.

Read more less

 compatible for: Audi A3 1.8/2.0 TSI 2015 Onwards Q3 2.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ2 2.0TSI (2018-2021) TT Mk2 2.0  A31.8/2.0 TSI 2015 Onwards Q32.0 TSI (2015-2018) S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ22.0TSI (2018-2021) TTMk2 Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020 Skoda Kodiaq 2.0TSI (EA888 Gen 3) RS 2021- Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Jetta MK7 (2018-2021) 2.0 GLI MK7.5 (2021-) 2.0 GLI Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) Touareg 2.0 TSI (2018-2021) Product Description Highlights: Power gains of up to 13BHP (when paired with the appropriate turbo inlet adaptor) Torque gains of up to 17NM (when paired with the appropriate turbo inlet adaptor) Pleated or foam filter available Greater engine sound Made in the UK Lifetime guarantee With our in-house VW Golf MK8R development vehicle we have been able to complete thorough testing on the EA888 gen4 platform, from rolling roads to track time. This has allowed us to create FMINDK44, the second induction kit we have available for the EA888 gen 3 and gen 4 platform (alongside our carbon fibre variant, FMINDK40). This kit features either a Forge Motorsport Ram Air high flow, pleated, synthetic nanofiber filtration filter or a Pipercross foam filter. Both are manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption. The result of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the EA888 engine. With the use of SolidWorks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. The majority of our dyno testing was done on our VW Golf R MK8 EA888 Gen 4, as such you may find slight variations in gains when fitted to other vehicles sharing this engine. During the final prototypes testing we found that the induction kit with stock turbo inlet produced gains on average of 3.5BHP. However, when paired with our turbo inlet adaptor FMTIA5 (RHD), FMTIA6, or FMTIA9 (LHD), or FMINLMK7, this is where the stock EA888 gen4 engine saw impressive gains, increasing power up to 13BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 8BHP; while the drivability and the punch from extra torque increases can be felt on the road at between 4000RPM to the rev limit an average gain of 17NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power.     Why Do We Try To Decrease Inlet Air Temperatures (IAT’S)? By utilising the OEM cold air feed, and keeping the heat shield open on the headlight corner side we were able to see a decrease in IAT’s compared to the OEM during testing. By ensuring that the intake heat shield is open on this side it also means that vehicles being tuned to stage 2/3+ have a reduced risk of being restricted with them pulling in a greater quantity of air. Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance when tuning to stage1, stage 2 and beyond. Not only do you get the bhp performance benefits, but FMINDK44 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development has gone into this extraordinary performance induction kit. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. The kit has been designed not just to increase power but to fit a whole range of vehicles on the MQB platform. This goes as far as to include cars using the OEM turbo elbow and the Forge Motorsport FMTIA5/FMTIA6/FMTIA9 high flow elbows. With FMTIA5/FMTIA6/FMTIA9 using multi ply silicone, it has minimal flex; however the OEM inlet hose uses an accordion rib design which could cause the filter to damage itself or the heat shield. Unlike our competitors, we have included a P-clip and tab on the back of the heat shield, allowing the OEM inlet hose to be secured to the heat shield, meaning no damage and no annoying rattles! Time taken to install - around 1 hour

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS:  Volkswagen Arteon 2.0TSI 280PS 4Motion (Non OPF/GPF Vehicles Only) 2017 to 2019 Volkswagen Arteon 2.0TSI 280PS 4Motion (North American OE Valved Systems) 2019 to 2021 requires a Stage 2 ECU remap (Non-GPF Equipped Models Only)  Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Replacement Brake Pads for the Racingline 'Stage 2 Evo' 4-Piston Calipers - Stock CompoundThese are designed for standard road use and light fast road use. These are the ones which come in the kit when new. Wear indicators are not fitted to these pads - Track CompoundThese are designed for heavy fast road use only and light track use. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators are not fitted to these pads - EBC Yellowstuff CompoundDesigned for fast road use and light track day use. These 'R90' Approved pads are road legal, and offer slightly lower dust levels than stock pads. Wear indicators cannot be fitted to these pads- Ferodo DS PerformanceThese are designed for standard road use and enthusiastic fast road use.These are probably the best all rounder available for this kit and suit the needs of most of our customer's for Non-Tracked vehicles.Wear indicators cannot be fitted to these pads- Ferodo DS2500 CompoundThese are designed for more aggressive fast road use and ocasional 'beginner' track days. They have the same bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads - Ferodo DS3000 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pad- Pagid RSL-29 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pads - EBC RP1 CompoundDesigned for vehicles that are driven hard on track, RP1 possesses a modeately high friction level of 0.45 between 100 and 750 Celcius. This compound is an ideal heavy track use compound for over servo'd vehicles such as the VAG range. Wear indicators cannot be fitted to these pads - Tarox Corsa CompoundThese are ideal for fairly aggressive fast road use and ocasional 'beginner' track days. They have a reasonably good bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads- Tarox Competizione CompoundThese are designed for Track use only. They don't bite great from cold, however they have a higher heat range and a really good bite once up to temperature. Additional 'pad noise' and brake dust will be noticed. Wear indicators cannot be fitted to these pad Do I have the Old kit, or the EVO Kit? We have included an image in our listing to help customers check if they have the Older kit or the EVO Kit. EVO Kit - The EVO Kit can be identified by the shape of the caliper pistons being highlighted in the extenal design of the caliper. As well as this, the EVO Kit has a brace bar running down the Length of the Caliper.  VWR0323

Read more less

Replace your Awful Chrome R Line badges (Or add to cars without) with our full 4D Replacement Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges on your boot lid! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing (Black on our badge) and Front (White on our badge) to give you a truly Unique experience! The price shown is for 1 Badge (105mm x 38mm) This is NOT a Gel Inlay - Your OEM Badge will need to be removed

Read more less

The 034Motorsport Billet Coolant Vent Union is designed to replace the factory plastic and failure-prone coolant union on the cylinder head of the EA888 Gen3 and Gen4 engines. Being in close proximity to the turbocharger, the factory plastic coolant union is subject to a lot of heat, becoming brittle and failing over time. Upgrading to the Billet Coolant Vent Union minimizes the risk of coolant leaks, enhancing the reliability of your EA888!The 034Motorsport Billet Coolant Vent Union is machined from billet 6061-T6 aluminum, which is ideal for components exposed to high temperatures and harsh operating conditions. The Billet Coolant Vent Union is then black anodized for long-lasting looks and corrosion resistance to ensure that this upgrade is able to withstand the high temperatures next to your turbocharger. FEATURES: CNC Machined From Billet 6061-T6 Aluminum Black Anodized for Long Lasting Good Looks and Corrosion Resistance New O-Ring Preinstalled Direct Replacement of OEM Component WHAT’S INCLUDED: 034Motorsport Billet Coolant Vent Union 1x O-Ring Preinstalled VEHICLE FITMENT FOR: Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Volkswagen/Passat B8 Shop By Car/Audi/Q5 (B9) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/Volkswagen/Beetle (16) Shop By Car/Audi/S3 (8Y)

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Racingline RP700 Rear Brake Pads - For MQB Evo Models with 310mm Rear Disc Setup Our new RP700 Brake Pads are replacement brake pads for cars using the standard brake hardware, with applications for multiple MQB (and some other) performance models. Drive your car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP700 Brake Pads come in. Using an advanced high friction material, these new pads provide a dramatic improvement in the braking department.  A straight replacement for the factory pads using the standard brakes, yet delivering a much higher resistance to high temperature fade.   Fits : Volkswagen/ArteonVolkswagen Golf Mk8Audi A3 (8Y 2020-)Audi RS3 (8Y)Audi S3 (8Y)SEAT Leon Mk4Skoda Octavia Mk4

Read more less

  The APR Open PEX intake system is the best price/performance intake system on the market and has already been installed thousands of times in vehicles.The sound and performance of the engine were significantly increased and the restrictive area in the intake tract was eliminated. This made it possible to reduce the pressure loss and increase the efficiency of the turbocharger while doing the same work. This results in more power and torque while reducing load. The system uses a washable 7-inch and very high quality conical cotton filter that has a 4-inch connection.This was also necessary to reduce the standard pressure drop and maximize the airflow while also significantly increasing the sound aspect. The PEX material conducts heat very poorly, which also benefits the system and therefore ideally contributes to increasing performance.The PEX material still gives the engine compartment a touch of stock component, as far as you can say for an open air filter. The material also offers the advantage that almost any design can be realized. This made it possible to create an extremely complex and organic shape of the heat shield, which can effectively shield the hot air from below. Features: Improved intake noise Reduction of pressure loss Increases the efficiency of the turbocharger ore power and torque High quality cotton filter Airflow is maximized Made from PEX material FITS: Shop By Car/Volkswagen/Passat B8 Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Skoda/Superb (3V 2015-) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4  

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

As part of our expanding VAG product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the MQB Evo engine (300-320ps), suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow features a constant 80mm diameter throughout, which limits flow and capacity. Our AIRTEC Motorsport direct replacement kit features a cast aluminium elbow and Pro Hoses silicone hose with a larger 90mm diameter throughout, until it tapers down to meet the 80mm air box, which offers a 27% increase in cross sectional area. The increased volume and improved design works to reduce restriction and improve flow to the turbo, providing an increase in throttle response. The elbow upgrade includes all fixtures and fittings, as well as detailed instructions. Dimensions:OEM Turbo Elbow:Diameter: 80mmCross sectional area: 5,027mm² AIRTEC Motorsport Turbo Elbow:Diameter: 90mmCross sectional area: 6,362mm² Fitment:Audi S3 8Y – 2020 onwardsCupra Leon Mk4 300 TSI FW – 2020 onwardsCupra Formentor 310PS – 2020 onwardsVW Arteon R 2.0 TSI 320ps – 2020 onwardsVW Golf Mk 8 GTI Clubsport – 2020 onwardsVW Golf Mk8 R – 2020 onwardsVW Tiguan II R 2.0 TSI 320ps – 2020 onwards Features: 27% increase in cross sectional area Smoother, freer-flowing design Improves airflow to the turbo Increases throttle response Direct replacement fitment Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSVAG10

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Lower Motor MountTwin Dogbone Inserts.MQB/MQB Evo models. Get your power to the road or track where you need it!   The Twin Dogbone Inserts fill the large voids in the factory lower engine mount with two billet inserts, limiting drivetrain movement for greatly improved strength and a much more enjoyable drive. What do they do? The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.    By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.    Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).  The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts. All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages. The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages. Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Transformed Drive Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges - especially valuable on FWD cars. Durability guaranteed Unlike polyurethane or steel insert options on the market, this billet aluminum part will not deform and wear over time, and guarantees long-lasting performance. Twin Protection The Twin Dogbone Insert uses not one but two precision machined billet inserts to avoid the damaging bending moment that comes from fitment of a single insert. Added Strength Machined from billets of T6061 Aluminium, the Twin Dogbone Insert is more than strong enough to keep the drivetrain properly located on high power, hard driven cars. Twin Inserts.Working together. Upper Insert: slides into the voids along the rear side of mount. Lower Insert: inserts into the voids from underneath.  Confirmed Applications. MQB & MQB 'evo' 2.0 TSI, 1.8 TSI, 2.5 TFSI, 2.0 TDI MODELS VWR150003/4 see below to identify which type > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+   Select yourcorrect version. The factory mount comes in two version across MQB models. To ensure fitment on your vehicle, please visually verify the mount you have, then select the correct insert below:  OE part: 5Q0 198 037 A – You’ll require the Version 1 Insert OE part: 5Q0 198 037 F – You’ll require the Version 2 Insert We recommend a visual check to make certain you have the right version:   Precision Engineered forPerfect Performance. Each Twin Dogbone Insert start life as a billet of T6061 Aluminium, before being precision CNC-machined into shape Carefully developed for minimal transference of NVH through to the cabin RacingLine’s trademark black anodised finish for durability over many years Engineered to slip easily into the voids In factory lower mount Easy, straightforward installation designed to be fitted without subframe removal takes minutes  

Read more less

Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required.  Confirmed applications VWR900000 – BLUE  I   VWR900001 – RED  I  VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4  2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 ​ Sold individually.  Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021

Read more less