ECS Tuning

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your facelift B8.5 S5 or A5 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment.  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.​ Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - OE-type self-tapping torx screws   PRODUCT DEVELOPMENT Our ECS MK7 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.   *1 sterile antiseptic alcohol wipe (ES2918127) is suggested for proper installation.*

Read more less

Fits pre-facelift models without integrated tips in the rear valance FITS SEDAN ONLY Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B9 S4. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your facelift B8.5 S4 or A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

ECS Tuning Gloss Black Rear Diffuser - Mk7 Golf GTI Upgrade the exterior styling on your 2013 - 2017 Volkswagen MK7 GTI with our ECS Tuning Gloss Black Rear Diffuser.An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads!Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with the ECS Gloss Black Diffuser!  PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side) PRODUCT DEVELOPMENT The ECS MK7 GTI Rear Diffuser was designed, engineered, tested and quality inspected by ECS's own Research and Development team in their Wadsworth, Ohio facility. ECS strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T Volkswagen Golf VII Hatchback 2.0T Gen3

Read more less

The ECS Tuning Rear Chassis Braces bridge the gap between the mounting points of the trailing arm pockets and brace the weak rear tunnel areas. These triangulated bolt-on bars help to increase structural rigidity of the floor and chassis area which limits body roll. Beautifully powder coated your choice of wrinkle red or wrinkle black to offer both good looks and durability.   PART DESIGN Mandrel bent DOM steel professionally TIG welded to chassis adapter plates. Precision engineered to fit 4Motion and FWD models.  Powder coated for superior durability and corrosion resistance Reuses the already-stout OE center-tunnel brace for exhaust clearance.   PERFORMANCE FEATURES With the ECS Rear Chassis Braces in place, body roll  is minimized. Our brace is a precision engineered structural component that ensures power is transferred properly and not lost through chassis flex, without any increase in NVH.    PRODUCT DEVELOPMENT Our ECS Rear Chassis Brace Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is easy. Simply unbolt the trailing arm mounting bolts and rear tunnel nuts, and install the appropriate-side brace.   Trailing arm mounting bolts are recommended to be replaced every time they are loosened. Please see ES250674 - QTY 4, for replacements (QTY 4 services BOTH braces). Torque to 50 Nm +45°. Center bar nuts are reusable. Torque to 20 Nm.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8/B8.5 A5 (with integrated trunk spoiler) and S5. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your facelift B8.59 S5 or A5 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. *Does not fit Competition models Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B8 S4 or A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details The Engineering team at ECS Tuning has spent countless hours in the development of the exclusive B7 2.0T Luft-Technik Intake System. This intake was precision engineered using state of the art laser scanning, dyno testing, and 3D CAD technology to ensure factory-like fitment in your engine bay with increased engine performance. The twin-layer powder coated aluminum heat shield resists the performance robbing effects of heat soak by secluding the air filter to the right side of the engine bay. The throttle body inlet hose is crafted of high quality 4-ply silicone to achieve increased durability and resistance to collapsing. This intake has been subjected to rigorous real world testing with verified performance gains on our in-house chassis dyno resulting in an increase of 5WHP and 5WTQ on the APR Stage 1 ECU upgrade. The slight increase in induction noise during heavy acceleration gives hint to the added performance without being too intrusive. The end result of all of this effort is an intake system that combines unrivaled beauty, fitment, quality and performance in one stunning package that will make a statement in your engine bay.    The ECS Tuning Luft-Technik Intake System features: Specifically crafted to fit B7 A4 2.0T engines using all stock mounting locations 4-ply silicone turbo inlet to hinder collapsing, mated with stainless steel hardware & hose clamps for exceptional corrosion resistance and durability Powder Coated twin-layer aluminum heat shield 3" conical hi-flow reusable air filter; featuring 8 ply cotton gauze construction and a bell mouth inlet to minimize restriction while maximizing filtration efficiency Stainless steel hardware & hose clamps for exceptional corrosion resistance and durability Broader and smoother torque curve for an enhanced driving experience Gains of +5 WHP / +5 FT-LBS WTQ on APR Stage 1 ECU Upgrade  No modifications required, fully reversible installation Complete install instructions provided! Settle for nothing but the absolute best with ECS Tuning's Luft-Technik Intake Systems.  For help with installation please download or print ECS Tuning's in-depth PDF installation instructions found under the Installation tab.  *Not CARB Approved. Cross Reference Intake, Cold Air Intake This Part Fits the Following Vehicles Make Model Submodel Engine Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7 Golf R with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - OE-type self-tapping torx screws   PRODUCT DEVELOPMENT Our ECS MK7 Golf R Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. *1 sterile antiseptic alcohol wipe (ES2918127) is suggested for proper installation.*

Read more less

Our ECS Tuning Rear Stress Bar Kit stiffens the chassis in the rear of your Volkswagen MK5 Rabbit, R32 or MK6 Golf, GTI, Golf R in the area most prone to chassis flex during hard cornering or changes in road surfaces. Our Stress Bar helps to stiffen the rear chassis from undesired torsional flexing of the body which allows for faster turn-in speed and flatter cornering, while reducing chassis creaks and groans. Our Rear Stress Bar Kit achieves all of these great benefits with little intrusion in the cabin, maximizing cargo area, while maintaining functionality with the rear seatbacks in all positions, with no noticeable increase in NVH. The entire assembly is easily removed in minutes and requires no permanent drilling or cutting into the body.   PART DESIGN In-house designed and engineered in our Wadsworth, Ohio facility, using FARO ARM laser scanning technology for precise fitment  Upper mounting brackets effectively grab the inside of the rear seat latch anchor and require absolutely no cutting or drilling for an easy install Upper mounting brackets are machined from 6061-T6 billet aluminum and are finished in a black anodized coating Rear Stress bar is made from heavy duty .120" wall DOM steel tubing, powdercoated in a tough wrinkle black finish and features a turnbuckle style adjustment for simple on-car tensioning Heavy duty zinc-plated rod ends with LH and RH threads feature high quality bearings and locking jam nuts to secure final adjustments Total kit adds only 7 pounds Upgradeable to our "Stage 2 Add-On Kit" which provide two lower braces, brackets and a union assembly to further tie the rear chassis together (see ES3603701)    KIT CONTENTS Upper mounting brackets and hardware  Upper stress bar with rod ends and jam nuts    PERFORMANCE FEATURES By tensioning the body together in the largest void of the vehicle, body flex is reduced. This improves the handling of the vehicle by reducing understeer, in addition to allowing faster turn-in speed all while reducing common creaks and groans.   PRODUCT DEVELOPMENT Our ECS Tuning Rear Stress Bar Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information.  Cross Reference hatch brace, hatch bar, interior brace This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen R32 MKV All 3.2 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The factory charge pipes and rubber couplers on your 2.0T FSI engine were never designed to handle the stress and abuse of higher boost levels much beyond stock. When combined with power-robbing abrupt and sharp bends, inferior rubber material, and small diameter tubing, it's easy to see why your intercooler pipes and couplers should be replaced, even on stock engines.  Our in-house designed and engineered High Flow Intercooler Pipe Kit features mandrel bent, bead rolled, powdercoated aluminum plumbing from the outlet of the compressor housing directly to the throttle body along with smoother flowing silicone couplers, stainless steel T-Bolt clamps and all new installation accessories for an easy, direct bolt on installation.    PART DESIGN TURBO OUTLET PIPE KIT Turbo Muffler Delete Pipe - creates a smooth connection from the compressor outlet, directly to our silicone outlet elbow. In addition to smoother airflow it increases turbocharger working sound for glorious turbo noises!  Tubing - 2.50" OD CNC-mandrel bent aluminum with bead rolled ends and Tig-welded factory-location mounting bracketry. Finished in a durable black powdercoat for long lasting great looks.  Couplers - Fiberglass-reinforced silicone hoses provide the necessary connections while optimizing airflow. Rated to withstand up to 250° F. and 45psi of boost pressure.  Hose Clamps - T-bolt hose clamps provide a strong, secure connection to prevent hose couplers from blowing off.  Intercooler Adapter - Precision CNC-machined aluminum intercooler adapter provides the connection from our silicone coupler to the OEM intercooler "quick-clip" fitting.   THROTTLE PIPE KIT Tubing - 2.50" OD CNC-mandrel bent aluminum with bead rolled ends and Tig-welded factory-location MAP sensor flange and noise pipe connection. Finished in a durable black powdercoat for long last great looks. Tested to 44psi at 0% leakdown to ensure there are no leaks. Couplers - Fiberglass-reinforced silicone hoses provide the necessary connections while optimizing airflow. Rated to withstand up to 250° F. and 45psi of boost pressure.  Hose Clamps - T-bolt hose clamps provide a strong, secure connection to prevent hose couplers from blowing off.  Intercooler Adapter - Precision CNC-machined aluminum intercooler adapter provides the connection from the OEM intercooler "quick-clip" fitting to our silicone coupler.   KIT CONTENTS TURBO OUTLET PIPE KIT Turbo Muffler Delete Pipe Silicone Turbo Outlet Hose Coupler w/ T-bolt Clamps  Turbo Outlet Pipe Assembly  Silicone Intercooler Inlet Hose Coupler w/ T-bolt Clamps  Intercooler Inlet Adapter    ​THROTTLE PIPE KIT Intercooler Outlet Adapter  Silicone Intercooler Outlet Hose Coupler w/ T-bolt Clamps  Throttle Body Pipe Assembly w/ MAP sensor hardware  Silicone Throttle Body Hose Coupler w/ T-bolt Clamps    PERFORMANCE FEATURES Dyno tested on our in-ground Mustang "AWD 500 SE" Dyno on a MK5 GTI 2.0T FSI comparing ECS Turbo Outlet and Throttle Body charge pipes against OEM charge pipes. Our test vehicle was equipped with our ECS Kohlefaser Luft-Technik Intake, ECS OE-upgrade Cast Intercooler, 3.0" High Flow Downpipe and Malone Stage 2 ECU Software.  OEM Charge Pipes - 234 WHP @ 6,100 RPM & 265 WTQ @ 3,600 RPM ECS Charge Pipe Kit - 255 WHP @ 5,750 RPM (+21 WHP) & 282 WTQ @ 3,900 RPM (+17 WTQ)    PRODUCT DEVELOPMENT Our ECS 2.0T FSI High Flow Intercooler Charge Pipe Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. Performance data metrics are collected utilizing our in-house Mustang AWD 500 SE in ground dyno.   INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Volkswagen Golf V All 2.0T Volkswagen Jetta V All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B9 A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a single tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the C7 A6 and S6. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

These Schwaben Ramps are  lightweight at only 4 lbs each and easy to carry and maneuver. They will not slip, slide or scoot on any surface and never scratches or marks your floor. These ramps are 100% solid core construction for additional strength. These are ideal for smaller sports cars with short noses. Please take measurement below before ordering. Great for quick oil changes and underbody maintenance. Fits tires up to 8" wide. One set holds up to 3000 lbs. Ramps have have handy carrying straps. Please see handy chart below to see if our 30" Schwaben ramps are right for your vehicle! How to measure your car for fitment. 1. Take a yard stick, wedge it under the front inside edge of the front tire. 2. Raise the yard stick up until it hits the underside of your car( the spoiler. 3. Measure from the tip of the yardstick to the ground, vertically. If your measurement is 10.5" or greater, you can clear the ramps without a problem. Cross Reference race ramps, car ramps This Part Fits the Following Vehicles Make Model Submodel Engine Audi All All All BMW All All All Mercedes Benz All All All MINI All All All Porsche All All All Volkswagen All All All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

So you changed the look of the front and rear of your B8/B8.5 A4 or S4 but forgot the sides?  Upgrade your exterior styling with the ECS Tuning Gloss Black Flat Side Splitters. These side skirts simply bolt on underneath the rocker panel with included self tapping screws and add a more sporty appearance to your vehicle. A great looking stand-alone body part or one that compliments other existing exterior styling upgrades.  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment, each set is crafted of gloss black, UV stabilized ABS polymer to achieve its world class appearance and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Convenient, pre-drilled mounting holes allow you to correctly align and secure the side skirt extensions to the rocker panels. We suggest putting a dab of a rust preventative (anti seize or similar) on the tip of each screw before install.  This will lubricate the screw and protect the newly threaded holes.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Fits up to 2019 model year with *pre-facelift* front bumpers Raise the level of style on your pre-facelift B9 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8.5 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. With a flatter "splitter" style profile, this quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. If you are looking for a whole package, this splitter style front lip is designed to match and compliment our flat side skirts (ES4045736) and rear bumper side splitters (ES4044452).  To further compliment the look of your new front lip, check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The Engineering team at ECS Tuning has spent countless hours in the development of the exclusive Audi B9 SQ5 3.0T Luft-Technik (Air Technology) Cold Air Intake System.  This intake was precision engineered using state of the art laser scanning, dyno and flow bench testing, and 3D CAD technology to combine factory-like fitment in your engine bay with increased engine performance. The powder coated aluminum heat shield resists the performance robbing effects of heat soak by secluding the air filter to the right side of the engine bay. The turbo inlet hose is crafted of a high quality 4-ply silicone to achieve increased durability and resistance to collapsing. We also include a large bellmouth (velocity stack) filter flange inlet to reduce turbulence and maximize flow.  This intake has been subjected to rigorous real world testing with verified performance gains on our in-house dyno and flow bench resulting in an increase of 17WHP and 26WTQ with a JB4 tuner and an x-pipe and a 33.5% increase in flow rate over stock. The increase in turbocharger spool noise during heavy acceleration is an enthusiast's dream, giving hint to the added performance without being too intrusive. The end result of all of this effort is an intake system that combines fitment, quality and performance into one stunning package that will make a statement in your engine bay.   The ECS Tuning Luft-Technik Intake System features: Specifically crafted to fit Audi B9 SQ5 3.0T engines using all stock mounting locations 4-ply silicone turbo inlet to hinder collapsing Powder Coated aluminum heat shield and inlet duct that seal to the hood to lower intake temps 3" conical hi-flow reusable air filter; featuring 8 ply cotton gauze construction and a bell mouth inlet to minimize restriction while maximizing filtration efficiency Stainless steel hardware & hose clamps for exceptional corrosion resistance and durability Broader and smoother torque curve for an enhanced driving experience Max gains of +17 WHP / +26 FT-LBS WTQ with a JB4 tune and an x-pipe Flow rate of 408.5 CFM compared to the stock intake at 305.8 CFM when tested at -10.0 in H2O - this is a 33.5% increase in flow rate! No modifications required, fully reversible installation Complete install instructions provided! Settle for nothing but the absolute best with ECS Tuning's Luft-Technik Intake Systems.  For help with installation please download or print ECS Tuning's in-depth PDF installation instructions found under the Installation tab.  ** Not CARB Approved. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 SQ5 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Heavy Duty Rear Shock Mount Kit offers significant performance to your vehicle's handling and long term durability as compared to stock shock mounts. With the increased durometer over the squishy, OEM 75A durometer shock mounts, the ECS void-free 85A durometer rubber shock mounts will better resist deflection and premature wear that commonly plagues the OE mounts without sacrificing ride comfort. This is a must have if you are installing sport springs, coilovers or when replacing rear shocks. OEM shock mounts are known to wear within 100k miles, typically associated with annoying pop and  rattles as the vehicle goes over bumps and uneven terrain. The ECS Heavy Duty Rear Shock Mounts are made to last, with their higher durometer over stock and precision to OE tolerances. The shock mount bodies are made of high quality cast aluminum and feature a black powdercoated finish for excellent corrosion resistance over the OEM mounts. Our HD Rear Shock Mounts were subjected to rigorous on and off the car testing. Through a very lengthy development process with tens-of-thousands of testing miles, several design revisions and many prototypes tested, our In-House Engineering Team perfected the Heavy Duty shock mount design to offer real world benefits to make this a complete solution to the common-failing mounts of the MK5/MK6 platform (and similar) vehicles.     The ECS Heavy Duty Rubber Rear Shock Mount Kit includes the following: ECS Heavy Duty Rubber Rear Shock Mounts - QTY 2 Shock Mount Dust Caps - QTY 2 Lower Shock Mounting Bolt - QTY 2 Upper Shock Mount Bolts - QTY 4 Need new round bump stops and dust boots? Check out ES2575541 and ES316179 on our site.  Previous Revisions MK5SSKTR This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII Quattro 3.2L Audi TT MKII TTS 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

A last time, end-all repair of the inadequate OEM PCV hose design. By replacing the flimsy, heat hardened, OEM plastic hoses with 3-ply fiberglass reinforced silicone hoses, pre-molded to OEM specifications you can be certain to cure the inevitable return of many oil leaks and driveability problems that would have been.  Our ECS Tuning Silicone Upper & Lower PCV Hose Set includes the upper (manifold) PCV hose and lower (PCV to engine block) hose in gloss black silicone material and stainless steel smooth band hose clamps so you don't have to try and scour the garage or local parts stores.   PART DESIGN Molded to OEM specifications, these are a direct replacement to the failure-prone, heat-hardened plastic hoses that nobody likes to mess with! Easier to service than OEM clip-on hoses Made from heavy duty, 3-ply fiberglass reinforced silicone, our silicone hoses can handle greater temperatures and more flexibility than the OEM plastic hose without failure. Designed to resist oil, fuel and electrochemical degradation and tested up to continuous 250° Fahrenheit operating temperature and over 45psi, you can expect to achieve greater reliability, less turbulence and improved flow with our smooth silicone hose set.     PRODUCT DEVELOPMENT Our ECS Silicone PCV Hoses were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is the reverse order of removal of your OEM hoses, however, with our included worm gear clamps to be used to secure both hose end connections. Please reference your service manual on accessibility.  * This part is designed for the FSI engine only. This can easily be found on the engine cover of your 2.0T VW/Audi. It will clearly be stamped FSI (not TFSI). This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen EOS All 2.0T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Jetta V All 2.0T Volkswagen Passat B6 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Change the tone of your Audi S5 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases. The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust system note exponentially giving a more tuned European sound. The ECS X-pipe is fully CNC mandrel bent from high quality 304L stainless steel, tig welded with smooth merged pipe joints for optimal flow, and finished off with a soft brushed finish for exceptional looks. Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks. 304L Stainless Steel Engineered and tested in-house Precision CNC mandrel bent TIG welded joints Adds increased tuned European sound with minimal interior dB/drone Will NOT cause CEL (Check Engine Light) *Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available for order as es3106581. Cross Reference res delete, resonator delete, x pipe, xpipe This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less