ECS Tuning

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T Volkswagen Golf VII Hatchback 2.0T Gen3

Read more less

Raise the level of style on your VW MK7 GTI with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Carbon Fiber mounting brackets bolt to the existing lower valance mounting locations with supplied hardware, with an optional well nut insert and machine screw to secure the front center bumper support.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware make for an easy, non-permanent installation that provides a confident, secure fitment. Center post mounting hole location is optional. Drilling is only required for the center mounting post.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 GTI with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your Volkswagen MK7.5 GTI or MK7.5 Golf R with the ECS Tuning Carbon Fiber Rear Bumper Flares. This quality addition was engineered and designed in-house to fit directly to your factory rear bumper cover, with no modifications required and are 100% compatible with P.D.C. sensors.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the bumper corners and reflector housings, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Rear Bumper Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the rear bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car Dramatically improves the appearance of the rear end and adds a wide, aggressive stance from rear and side of vehicle Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Rear Bumper Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area with an alcohol wipe or similar cleaner, and apply the Flares directly to the rear bumper cover using the pre-applied adhesive tape.     ** All other products shown in installed photography are NOT included... This kit is for QTY 2 rear bumper flares ONLY!  ** *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

The ECS Tuning Rear Diffuser Add-On Kit easily installs over the factory rear valance on your 2018+ Volkswagen GTI to provide the appearance of an aggressive diffuser, without the need to remove your OEM valance. Engineered in-house, our rear diffuser overlay will be sure to catch attention and turn heads! Featuring more aggressive outer blades and three new center blades to fill the massive void in the factory valance. Installs easily with our sleek mounting brackets and included hardware.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Overlays the factory valance to provide aggressive rear diffuser styling  Outer blades are designed around the OE blade surfaces and made more aggressive by lengthening and tapering the blade towards the bottom Center blades fill the empty cavity of the OE valance and feature countered upper mating surfaces to the OE valance for a seamless fit The bottom of the valance has provisions for mounting to the OE body brackets Sheet metal brackets are used to mount to the bottom of the OE diffuser using stainless steel hardware and rubber insulated well nuts Textured matte black finish resembles the OE valance texture for OE+ appearance  Manufactured from ABS vacuum formed plastic with UV additives to stand up to the abuse from the elements   KIT CONTENTS Rear Valance Overlay  Rear Valance Mounting Brackets (4) Side Blade Self Tapping Screws (2) Upper Mounting Rubber Insulated Well Nuts (4) Black Oxide Stainless Button Head Screws (6) Black Phosphate Barrel Nut Clips (2)     PRODUCT DEVELOPMENT Our ECS Rear Diffuser Add-On Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing   INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information. 

Read more less

Raise the level of style on your VW MK7 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.  *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware An optional well nut insert and machine screw secures the front center of the bumper. Requires drilling into the bumper cover for use.  Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures. The optional well-nut and bolt require drilling into the center of the bumper. Simply position the front lip to the center of the bumper, mark, drill and install the well-nut for a secure fitment.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Upgrade the exterior styling on your 2018+ Volkswagen MK7.5 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Please note, our diffuser is not compatible with some larger aftermarket oval exhaust tips Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.

Read more less

For vehicles with manual transmission only The GTI isn’t by any means a ‘sloppy’ car in terms of chassis rigidity, but under high-stress environments, like spirited driving or track events, it can flex and deliver a removed driving experience. Our new MK7 Front Subframe Brace is a piece to the puzzle for chassis stiffness that will provide a more connected, rigid, and responsive feeling behind the wheel of your VW.  Our new MK7 Front Subframe Brace is constructed of 6061-T6 Billet Aluminum and CNC machined for a perfect finish. Available in both anodized black and red aluminum, this brace is attractive and functional as a structural improvement and designed to fit with our existing Pendulum Mount upgrade and Street Shield Skid Plate so you don’t have to choose between excellent upgrade options in your MK7.   PART DESIGN Designed and engineered in-house using laser FARO scanning and 3D CAD modeling software  Constructed from billet 6061-T6 aluminum for structural rigidity  Machined pockets for reduced weight Low profile design maximizes ground clearance. Compatible with our ECS Billet Pendulum Dogbone Mount and ECS Street Shield Skid Plate.  Reduces subframe deflection by directly bracing lower control arm mounting points  Machined ECS logo    KIT CONTENTS Billet Aluminum Front Subframe Brace (Black or Red Anodized) Packet of thread locking compound  Replacement front control arm bolts - QTY 2   PERFORMANCE FEATURES Reduces front subframe deflection by bracing both front control arm mounting points   PRODUCT DEVELOPMENT Our ECS Billet Front Subframe Brace was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing

Read more less