Racingline

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

2.0 TSI EA888 gen.4 ContinentalTurbo Inlet SystemTurbo 90 Inlet & Silicone Inlet Hose.For VW, Audi, Cupra 'higher output' 300/310/320PS (Continental turbo)  Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.For the Continental turbo (higher output) 300/310/320PS engines such as Golf 8 R, Golf 8 GTI CS, Tiguan R, Audi S3 8Y & Cupra Leon & Formentor and many more.   What the turbo inlet system does.  Our new Turbo Inlet System for the 300-320PS MQB 'EVO' cars such as Golf 8R, GTI CS, Audi S3 8Y etc is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow.  The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 74mm on the factory part right up to 84mm. It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! TWO PIECE KIT It's only by combining both elements of this kit that we've been able to increase the diameter so significantly (+10mm) to release the true airflow gains.  POWER GAINS The ultra-thin wall High-Flow Turbo 90 Inlet features an internal velocity stack to maximise airflow capability through to the turbo's inlet. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered for perfect performance.  Reinforced high quality silicone prevents deformation under load or heat Flexible enough to allow just the right amount of engine movement under load Internally-stepped silicone to ensure smooth transitions CNC constructed from T6-6061 aircraft grade aluminium with Viton sealing O-ring Maximum 88mm outer diameter with ultra-thin wall 2mm tube, smoothed internal bore Polished then anodised in gloss black to look good, and stay looking good. CONFIRMED APPLICATIONS For MQB Evo cars with the 300-320ps EA888.4 (Continental turbo) engines:VWR120010 For Tiguan R ONLY with the 320ps EA888.4 (Continental turbo) engines:VWR120012 > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI EA888.4 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 (facelift EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Skoda Superb III 3V 2.0 TSI (facelift EA888.4) 2021+

Read more less

2.0 TSI EA888 gen.4 Garrett Turbo 245PS Turbo Inlet SystemTurbo 90 Inlet & Silicone Inlet Hose. RACINGLINE TURBO INLET ELBOW FOR 2.0 TSI EA888.4 245PS GOLF 8 GTI, LEON CUPRA FW, AUDI A3 8Y, OCTAVIA vRS NXVWR120003 For VW, Audi, Cupra 'lower output' 245PS / 207PS (Garrett Turbo)Golf mk8 GTI, Cupra Leon, Cupra Formentor, Octavia vRS & more. Release power with the 2.0 TSI gen 4 Turbo Inlet System. A significantly enlarged airflow path from intake straight into turbo.For the Garrett turbo (lower output) 245ps engines such as Golf 8 GTI, Cupra Leon & Formentor and Octavia vRS, plus 207ps Polo GTI AW.2 What the turbo inlet system does.  The RacingLine Turbo Inlet System for the 245PS & 207PS MQB 'EVO' cars such as Golf 8 GTI is a matched package of our much larger diameter, free flowing Turbo 90 Inlet paired with reinforced Silicone Turbo Inlet Hose for much higher airflow between intake and turbo. The factory inlet forces the airflow to pass through the restrictive plastic 'bellows' pipe, before tapering right down to run through a tight and restrictive plastic turbo inlet - in other words, terrible for flow.  The RacingLine Turbo Inlet System replaces this pipework with a larger diameter smooth-flowing silicon hose mated to a larger diameter thin-wall free flowing intake elbow. The internal diameter of the Turbo 90 Inlet is massively increased from 62.5mm on the factory part right up to 76mm. It's by combining the two parts of the kit that's allowed us to enlarge the diameter of both the Inlet and the Hose so much - and so give the maximum possible gains. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting this Turbo Inlet System. An essential upgrade! TWO PIECE KIT It's only by combining both elements of this kit that we've been able to increase the diameter so significantly (+13.5mm) to release the true airflow gains.  POWER GAINS The ultra-thin wall High-Flow Turbo 90 Inlet features an internal velocity stack to maximise airflow capability through to the turbo's inlet. EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish.  PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced high quality silicone prevents deformation under load or heat Flexible enough to allow just the right amount of engine movement under load Internally-stepped silicone to ensure smooth transitions CNC constructed from T6-6061 aircraft grade aluminium with Viton sealing O-ring Maximum 80mm outer diameter with ultra-thin wall 2mm tube, smoothed internal bore Polished then anodised in gloss black to look good, and stay looking good. CONFIRMED APPLICATIONS For 245ps & 207PS EA888.4 (Garrett turbo) engines:VWR120003 > VW Golf 8 GTI 2020+ > VW Polo 6 GTI 2.0 TSI 207ps AW.2 2021+ > Audi A1 Competition 207ps 40TFSI GB 2021+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 45 TFSI 8S 245ps (EA888.4) 2021+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Kodiaq vRS 2.0 TSI 245ps (EA888.4) 2021+

Read more less

Upgraded Boost Hose Kit.For all VWG MQB 2.0 TSI EA888 gen.3 & 3B. Internally wired, stepped internals, reinforced silicone. The RacingLine Boost Hose Kit for 2.0 TSI MQB smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  What do they do? Welcome to the ultimate Boost Hose Kit for 2.0 & 1.8TSI MQB vehicles. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.   By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs Five piece kit: The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included - however you'll only need to fit four of them.  ​ The choice of which Turbo Outlet Pipe (4a & 4b) depends on whether your car is pre- or post-2017. It's really easy to choose which to use, as it's either long or short depending on what OEM pipe you remove meaning that (unlike other kits) you can't really get this wrong! 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4a. turbo outlet pre 2017 4b. turbo outlet after 2017 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance      INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.  CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

RACINGLINE R600 EVO COOLANT UNDERHOSE Our R600 EVO Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look R600 EVO COOLANTUNDERHOSE PIPEFor VWG 2.0TSI EA888.4 (excluding Golf mk8 R)   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced 4-ply reinforced silicone to withstand the high pressures of the coolant system Inner Flouro lining to be compatible with G12 and G13 coolant fluid used on MQB cars Precision moulded to retain the perfect shape for the life of the car Temperature-resistant premium grade silicone rubber will exceed any possible coolant temperatures and keep its rigidity CONFIRMED APPLICATIONS VWR17 G8R600  FOR CARS WITH R600 INTAKE FITTED > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+

Read more less

POLO GTI mk6 AW 2017-2021 BOOST HOSE UPGRADE KIT. INTERNALLY WIRED, STEPPED, SUPER-STRONG SILICONE. The RacingLine Boost Hose Kit for Polo 6 GTI AW (2017-2021) smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  WHAT DO THEY DO? Welcome to the ultimate Boost Hose Kit for Polo GTI AW. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.  By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our four-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs FOUR PIECE KIT: The RacingLine Boost Hose Kit comes with four hoses included. 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4. TURBO OUTLET PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance    INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.    CONFIRMED APPLICATIONS MQB A0 with 2.0 TSI EA888 Gen 3B engines ​ >    VW Polo 6 GTI 2.0 TSI AW   2017-2021 ​ >    Audi A1 40TFSI GB   2019+

Read more less

2.0 TSI High Flow Turbo Inlet Hose.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3 & 3B Flow that airflow smoothly from your intake into the turbo. What theTurbo Inlet Hose does. The RacingLine High-Flow Turbo Inlet Hose is for all MQB 2.0 and 1.8 TSI EA888 gen 3 cars. The reinforced Silicone Inlet Hose has been engineered to increase air flow through to the turbocharger as the perfect compliment our R600 Cold Air Intake or even the standard airbox.   A simple fitment, it replaces the entire restrictive rear factory plastic ‘bellows’ pipe between the airbox and the turbocharger inlet.  The large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake.  Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes this hose a great compliment to the R600 intake. Put simply, you'll be wasting a chunk of the hard-gotten gains from your high-flow intake system if you leave this pipe standard. COMPATIBILITY The Turbo Inlet Hose is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS By taking away the standard plastic bellows pipe's restrictive and turbulent airflow path between the intake and the turbocharger, the High-Flow Turbo Inlet Hose gives a worthwhile power gain. EASY FIT Fitting is very straightforward. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish.   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from reinforced high quality silicone, our hose offers great rigidity to prevent deformation under load or heat. The engine moves considerably under load and so our turbo inlet hose allows just the right amount of flex.  Maximum diameter ultra smooth, high-gloss silicone with  smooth transitions promotes airflow. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines ​ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ Reinforced silicone elements embedded in critical areas to avoid compression under load.

Read more less

BREATHE FREE. LET YOUR ENGINE BREATHE. Take your RacingLine Intake to the next level with our Intake Upgrade Kit. For Audi S1, Polo GTI 1.8 and Ibiza Cupra 1.8. ​ NOTE: right hand drive cars only WHAT'S SO SPECIAL? One of our most popular products is the Cold-Air Intake System kit for Audi S1, the latest 6C Polo GTI 1.8 and Ibiza Cupra 1.8. ​ This Intake Upgrade Kit adds to your intake and takes things to the next level, ready to support higher power outputs and even turbo upgrades. The Intake Upgrade Kit comprises a new high-flow Turbo Inlet Hose plus Turbo 90 Inlet. Together these upgrades allow greatly increased airflow from your Intake into the turbocharger for lightning fast turbo response and higher power gains than the intake alone. The Upgrade Kit replaces the silicone Inlet Hose that was supplied with your intake - you won't need that any more. Put simply, you'll be wasting a chunk of the hard-gotten gains from your high-flow intake system without the Intake Upgrade Kit! COMPATIBILITY Works in conjunction with the RacingLine Intake, plus either the IS12, IS20 or IS38 turbos, ready for any future upgrades you make POWER GAINS Replacing the standard plastic pipe and elbow's highly restrictive airflow path through to the turbo gives a worthwhile power gain through smoothing and opening up that turn into the turbo SIMPLE FIT Fitting is very straightforward. The kit is installed in around 15 minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced high quality silicone to prevent deformation under boost pressure or heat Maximum diameter ultra smooth, high-gloss silicone with smooth transitions promotes airflow Formed silicon internal lip on the joins ensures smooth airflow transition Twin nitrile O-rings for the perfect seal into the turbo Maximum diameter ultra-thin wall T6-6061 aluminium with smoothed internal bore for optimised airflow CONFIRMED APPLICATIONSNOTE: the Intake Upgrade Kit currently only fits RIGHT HAND DRIVE cars. A kit for LHD cars is coming soon. ​ Some customers have fitted this kit to LHD cars, but it requires minor modification to the Turbo 90 Inlet.  ​ Audi S1 2.0 TFSI 2015-2018 Volkswagen Polo GTI 1.8 2017-2018 6CSeat Ibiza Cupra 1.8 2017-2018 6J ​ * MUST HAVE RACINGLINE INTAKE KIT FITTED

Read more less