Racingline

The Racingline Performance Cold-Air Intake System kit delivers cold fresh air from outside the engine bay straight to your engine for Polo GTI models via a large-diameter free-flowing intake pipe. Fits:* 1.4TSI Twincharged with Battery in Boot. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12P0GT

Read more less

Racingline R600 Cotton Filter Oversock RacingLine’s new Cotton Filter ‘Oversock’ combines the best of both filter choices. The single layer foam material protects debris and dust from settling on Cotton Filter surface, and reduces the deterioration that all pleated cotton filters always suffer from.Simply slide the foam oversock over the top of the foam filter and protect the surface layer of the cotton from dust and dirt. When it needs it, the oversock can be cleaned or just replaced cheaply to keep the cotton filter at its very best for years. Simply slides over the top of the Cotton R600 filter  Cotton Filters always deteriorate in efficiency as dirt settles and slowly restricts airflow – this Oversock keeps the surface clean Simply remove the Oversock and clean it, or replace at each service, keeping your Cotton Filter airflow like new Note, not for use with the Tri-foam filter. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12G7R600OS

Read more less

2.0 TSI MQBPerformance Intercooler.Golf mk7/7.5 GTI/R, Audi S3, Leon Cupra, Octavia vRS & more. Delivering lovely cool intake air temperatures for your 2.0 TSI EA888 gen3 MQB car. Again and again and again. What doesit do? The factory intercooler on the MQB-platform cars has proved to be unable to cope with the demands of higher power, hard driven cars, showing up as serious power losses during hard driving as air temperatures soar. Our massive 'plate & bar' Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3.  By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again. No need for the recovery cool-down times needed for the production intercooler. Our development focussed on finding the ‘sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. This race-proven cooler really is essential for every stage of tuning on any high performance MQB-platform car. MAXIMUM CORE SIZE The massive 'plate & bar' intercooler unit features a high-speed core using extra tall internal tubes for maximum boost flow. SOPHISTICATED CORE Highly effective aluminium plate & bar construction, developed following rigorous testing to optimise core dimensions, fin density, and pipe flow. SMOOTH END TANKS Cast construction for minimal turbulence and restriction delivering maximum flow across the entire core depth. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Massive 56mm core depth of our 'Plate & Bar' system uses careful optimised fin design. Giant core dimensions of 694mm x 410mm x 56mm (27” x 16.14” x 2.2”) Don't confuse our 'Plate & Bar' construction with the cheaper and less-effective 'Tube & Fin' construction that most aftermarket intercoolers use. CONFIRMED APPLICATIONS Some trimming to the plastic front panel may required for fitment: > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

REAR BODY BRACE Want to sharpen up your Golf 7 & 7.5 handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES IT DO? Modern cars like the Golf 7 & 7.5 run a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why the Clubsport S Golf gets a factory rear brace.  The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into beautiful, ultra-stiff carbon fibre link bars drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible. Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace. LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify. PRACTICAL Compatible with rear seats up or down, and we've even added in the luggage tie-downs into the mounting points. LIGHTWEIGHT A ruthless approach to weight-saving. Billet aluminium mounting brackets bonded to ultra stiff 3K twill carbon link bars. ADJUSTABLE Every mass-produced car body has small differences in dimensions. The brace is tensioned after fitment for ultra-tight alignment to your car. Confirmed Fitment Golf Mk7 Hatch Golf Mk7.5 Hatch Golf Mk7 Estate Golf Mk7.5 Estate  

Read more less

Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required.  Confirmed applications VWR900000 – BLUE  I   VWR900001 – RED  I  VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4  2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 ​ Sold individually.  Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021

Read more less

Racingline Front Panel Adaptor - Polo 6RReplacement front Panel Adaptor for the following Racingline Intakes: - VWR12P0GT

Read more less

Racingline Replacement Filter Only - Polo GTI 1.4TSIThis replacement filter is suitable for the following Racingline Intakes: - VWR12P0GT

Read more less

RACINGLINE R600 EVO COOLANT UNDERHOSE Our R600 EVO Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look R600 EVO COOLANTUNDERHOSE PIPEFor VWG 2.0TSI EA888.4 (excluding Golf mk8 R)   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Reinforced 4-ply reinforced silicone to withstand the high pressures of the coolant system Inner Flouro lining to be compatible with G12 and G13 coolant fluid used on MQB cars Precision moulded to retain the perfect shape for the life of the car Temperature-resistant premium grade silicone rubber will exceed any possible coolant temperatures and keep its rigidity CONFIRMED APPLICATIONS VWR17 G8R600  FOR CARS WITH R600 INTAKE FITTED > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW Tiguan II 2.0 TSI 245ps 2021+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > Cupra Ateca 300ps (EA888.4) 2021+ > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+

Read more less

ADJUSTABLE REAR DROPLINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Rear Droplinks are an essential upgrade to any lowered or performance car WHAT THEY DO. Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements.Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier.  Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. ADJUSTABLE When you lower ride height, the geometry will now be adding preload to your anti roll bar. It's vital to adjust this back to neutral with the +/- 5mm adjustment built-in. PRECISE Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. Increase durometer rubber bushing creates direct response for anti-roll bar under cornering conditions RACE-PROVEN Developed for our race cars - adjusting out the sway bar preload allows the anti roll bar to work within its correct operating envelope is an essential part of geometry set-up. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Motorsport-specification ball joint ends - high strength teflon-lined steel +/- 5mm of adjustable length with stainless steel insert to zero Anti Roll Bar preload  Increase durometer rubber bush to create direct response for anti-roll bar under cornering conditions Rubber dust boots fitted to protect the joints  Left / Right threaded ends make for easy length adjustment in-situ without having to detach and re-attach Lightweight CNC-machined 6061-T6 Aluminum bodies with beautiful gloss black anodised coating CONFIRMED APPLICATIONS VWR520000 (supplied as a pair) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+

Read more less

CLICK BAIT. BILLET OIL FILLER CAP For all VWG 2.0 TSI EA888.4 engines Make topping your oil up a pleasure! WHY CHANGE YOUR OIL CAP? The RacingLine Billet Oil Cap is beautifully over-engineered in customary RacingLine fashion to give an exquisite feel and exceptional product experience.  Our oil cap is all about the 'click'. Never again will you worry whether you tightened your oil cap fully - as this billet aluminium cap clicks hard and locks into place. The precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI engines. IT’S ALL ABOUT THE DETAIL PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined  with the latest CNC 5-axis technology. Each cap starts life as a solid billet of 6061 aerospace-grade aluminium. Polished, then gloss-anodised Midnight Black to stay beautiful year after year. CONFIRMED APPLICATIONS VWR19002 For all 2.0 TSI EA888.4 Engines in MQB 'EVO' & other cars, including: ​ New rubber seal included on your new oil cap - ready to fit! > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 8 GTE 2020+ > VW Golf 8 1.5 TSI 2020+ > VW Golf 7 & 7.5 1.4 TSI / 1.5 TSI 2013-2020 > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc 1.4 TSI / 1.5 TSI 2017+ > VW Tiguan II 1.4 TSI / 1.5 TSI 2016+ > VW Tiguan II R 2.0 TSI 320ps 2020+ > Audi A1 GB 1.5 TFSI 2019+ > Audi S3 8Y 2020+ > Audi Q2 1.4 TFSI / 1.5 TFSI 2017+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi A3 8Y 1.5 TFSI 2020+ > Audi A3 8V 1.4 TFSI / 1.5 TFSI 2013-2020 > SEAT Ibiza 6F 1.4 TSI / 1.5 TSI 2017+ > Cupra Leon IV FW 2020+ > Cupra Leon IV FW 1.5 TSI 2020+ > Cupra Leon IV 300 TSI FW 2020+ > Cupra Leon IV 245 TSI FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 1.4 TSI / 1.5 TSI 2015-2020 > Cupra Formentor 310ps 2020+ > Cupra Formentor 245ps 2020+ > Cupra Formentor 2020+ > SEAT Ateca 1.4 TSI / 1.5 TSI 2016+ > SEAT Ateca 2.0 TDI 2016+ > SEAT Arona 1.4 TSI / 1.5 TSI 2017+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+

Read more less

Sport Lowering SpringsFor 2020+ Audi S3 8Y (MagRide compatible)VWR3131S3 Make the RacingLine Sport Lowering Springs the first upgrade to your Audi S3 8Y. What they do. If you use your new S3 8Y on a daily basis and are only looking to uprate one aspect of your car, you can't do better than our Sport Springs.  They replace the car's four standard springs with re-engineered, different-rate and slightly shorter Sport Springs. The vehicle's center of gravity is lowered, reducing body roll for better dynamics, whilst maintaining the ride quality and comfort of your car. Meanwhile, the car's appearance is transformed. By getting rid of those nasty wheelarch gaps, it'll look like it always should've from the factory! What's not to like? No wonder it's our best-selling product worldwide. THE PERFECT DROP The springs lower the S3 by around 20mm in order to preserve the wheel travel needed for perfect ride & handling. ADVANCED CONSTRUCTION ​We use progressive rate springs to preserve the ride quality in normal use, but then stiffen the rates at the ends of the travel. MAGRIDE COMPATIBLE The Sport Springs are developed to be fully compatible with cars fitted with Audi’s MagRide suspension and the regular S Sports Suspension. SPECIFIC TO S3 Unlike many, our S3 Sport Springs have only been developed for S3. Meaning no compromise for your car. OEM STANDARD All our Sport Springs are high quality, European-made springs, from the same factory that produces many of the OEM springs. BEAUTIFUL RIDE Our extensive development programme has given us a ride quality just as good as that of the standard car. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Many experts consider suspension development to be as much an art as a science.  In truth, it's a bit of both.   Go lower or stiffer than our springs and your car will bounce and crash as the dampers are mismatched to spring-rate, and the springs themselves run out of travel. Our progressive-rate spring construction means the spring rate in the middle of travel is very similar to standard.  It's only towards the end of the spring's travel (so, when braking or cornering hard) that we have engineered the spring to stiffen up. It's this progressive-rate spring design that gives such good ride quality. CONFIRMED APPLICATIONSVWR3131S3    4 door S3 sedan    5 door S3 Sportback Audi S3 8Y 2020+  

Read more less

The finishing touch for your RacingLine-equipped pride and joy. Our 100mm long OEM-quality car badge is just what is needed to differentiate your car from all the the rest.   This order is for a SINGLE car badge in your choice of Bright Chrome or Gloss Black. Each badge is made from high quality injection moulded ABS, supplied with strong 3M self-adhesive backing for simple fixing.

Read more less

Racingline Billet Aluminium Fuel Cap Racingline’s new Billet Fuel Filler Cap is beautifully over-engineered, meticulously machined with the latest CNC 5-axis technology from solid billet of 6061 aerospace-grade aluminium in customary Racingline fashion to give an exquisite feel and beautiful appearance. Making opening that fuel cap just a little more pleasurable. It’s all about the detail… Machined from a solid billet of aluminium, lovingly hand-polished then anodised in glossy midnight black The design still allows you to prop the cap in the factory locater in the filler flap while you’re filling up Comes complete with new rubber o-ring seal and locating tag to match all the functionality of the plastic factory cap A new pressure relief valve integrated into the cap always maintains balanced tank pressure Closes with a satisfying engineered ‘click’ each time you fill up Confirmed Applications The screw-cap fits many slightly older or smaller VWG vehicles – some listed here. If your factory cap is a screw-in type then this will be the correct fuel cap for you. VW UP GTI – 2016-2019 VW Golf 5 – 2005-2008 VW Golf 6 – 2008-2014 VW Scirocco – 2008-2017 VW Jetta V GLI – 2005-2011 VW Jetta VI GLI – 2011-2018 VW Polo 5 6C/6R – 2008-2018 Audi S1 2.0 TSI – 2015-2018 Audi A1 – 2010-2018 Audi S3 8P – 2006-2012 Audi A3 8P – 2003-2012 SEAT Ibiza Cupra 1.8TSI 6J – 2017-2018 SEAT Ibiza Cupra 1.4 TSI 6J – 2008-2015 SEAT Ibiza 6J – 2008-2018 SEAT Leon II Cupra/R 1P – 2006-2012 SEAT Leon II 1P – 2005-2012 Skoda Octavia II 1Z – 2004-2013 Skoda Fabia II vRS 5J – 2007-2014 Porsche 911 996 – 1999–2005 Porsche 911 997 – 2005–2012 Porsche Boxster & Cayman 986/987 – 1996–2012 Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR190000

Read more less

Racingline Audi Paddle Shifters Please check the applications listed below. Cool, sharp and positive changes are guaranteed from our replacement S-Tronic blades for Audi B9 Platform A4/S4/RS4, A5/S5/RS5 S3/RS3/TTRS (flat bottomed). The new billet aluminium blades, unlike cheaper alternatives, completely replace the standard paddles. Look great, feel great with precision shifting. PERFORMANCE AT YOUR FINGERTIPSWe have extended the size of the paddles above and below the steering wheel spokes to make pulling that next gear easier in tight turns when your hands are busy steering. This ensures that your performance behind the wheel is never compromised. NEVER SETTLE FOR LESSThere are many cheap ‘stick-on’ paddles available. As a full replacement unit, the Racingline Performance Racingline Performance DSG Paddles are completely different. The ‘stick-ons’ rely on double-sided foam tape laid on top of the factory plastic paddles and this will never give the positivity or long term rigidity that car and driver deserve. EXQUISITE DETAIL AND EXCEPTIONAL QUALITYAs with all our upgrades, the quality and attention to detail on our Racingline Performance DSG Paddle Replacements is instantly apparent. The +/- symbols are delicately cut out of the top of each blade. Polished, then gloss-anodised in a choice of Piano Black or Titanium-Silver before a laser-etched Racingline logo is placed on the bottom of each blade as a discreet assurance of quality. SIMPLE FITTINGFitting Racingline Performance DSG Paddles couldn’t be easier. With long-nosed pliers, simply pull out the pin from underneath the standard paddle – and the paddle comes away. Position your new VWR DSG Paddle into place, slide the pin back in fully and you’re good to go. Note: Some steering wheel variations may require airbag removal, we advise professional fitting in these instances. Confirmed Applications (FOR A3/S3 WITH OPTION SPORT STEERING WHEEL) Audi S3 8V 2013-2020 Audi A3 8V 2013-2020 Audi RS3 2.5 TSI 8V evo 2017-2020 Audi TTS 3 2.0 TSI 8S 2015+ Audi TTRS 3 2.5 TSI 8S 2017+ Audi A4 B9 2015+ Audi A4 3.0 TDI B9 2015+ Audi S4 B9 2016+ Audi S4 TDI B9 2019+ Audi RS4 B9 2017+ Audi A5 B9 2016+ Audi A5 3.0 TDI B9 2016+ Audi S5 B9 2016+ Audi S5 TDI B9 2019+ Audi RS5 B92017+ Audi R8 2015+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR494100

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

Racingline Billet Aluminium Fuel Cap Racingline’s new Billet Fuel Filler Cap is beautifully over-engineered, meticulously machined with the latest CNC 5-axis technology from solid billet of 6061 aerospace-grade aluminium in customary Racingline fashion to give an exquisite feel and beautiful appearance. Making opening that fuel cap just a little more pleasurable. It’s all about the detail… Machined from a solid billet of aluminium, lovingly hand-polished then anodised in glossy midnight black The design still allows you to prop the cap in the factory locater in the filler flap while you’re filling up Comes complete with new rubber o-ring seal and locating tag to match all the functionality of the plastic factory cap A new pressure relief valve integrated into the cap always maintains balanced tank pressure Closes with a satisfying engineered ‘click’ each time you fill up Confirmed Applications The fuel cap fits many VWG vehicles – main ones listed below. But if your car’s not listed below and your factory cap is a screw-on type then the RacingLine Cap will NOT fit. If it is ‘push and twist’ then it should fit. VW Golf 8 GTI 2020+VW Golf 8 R 2020+VW Golf 8 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat B8 2015+VW Arteon 2017+VW T-Roc 2017+VW Tiguan II 2016+VW Jetta VII GLI 2019+VW Polo 6 GTI 2.0 TSI AW 2017+VW Polo 6 AW 2017+VW T-Cross 1.0 TSI 2017+ Audi A1 GB 2019+Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi SQ2 2018+Audi RSQ3 F3 2019+Audi A4 / S4 / RS4 B9 2015+Audi A5 / S5 / RS5 B9 2015+Audi A6 / S6 / RS6 4G 2011-2018Audi A7 / S7 / RS7 4G 2011-2018Audi Q5 II FY 2017+Audi Q5 3.0 TDI II FY 2017+Audi SQ5 2017+Audi Q3 2019+Audi Q2 2017+ SEAT Ibiza 6F 2017+SEAT Leon IV Cupra FW 2020+SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Leon III 5F 2015-2020SEAT Ateca Cupra 2018+SEAT Ateca 1.0 TSI 2016+SEAT Arona 1.0 TSI 2017+SEAT Tarraco 2.0 TSI 2018+ Skoda Octavia IV vRS 2.0 TSI NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 2.0 TSI 5E 2014-2020Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020Skoda Fabia III NJ 2015+Skoda Karoq 2.0 TSI 190hp 2018+Skoda Kodiaq vRS 2018+ Porsche 911 991 2012+Porsche Boxster & Cayman 981/982 2012+Porsche Panamera 970 2010-2017Porsche Cayenne 958/9YO 2011+Porsche Macan 2014+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR19G711

Read more less

Billet Washer Cap. It’s all about that detail. Replace that cheap blue plastic washer cap with  the stunning RacingLine Washer Fluid Cap midnight black alternative. WHY CHANGE? Doesn't your car deserve better than cheap plastic parts in the engine bay?This RacingLine billet aluminium Washer Fluid Cap provides a beautiful complete replacement for your factory blue plastic cap to really smarten up the under bonnet visuals. The replacement Washer Bottle Cap is beautifully over-engineered to give an exquisite feel and exceptional product experience.  A beautiful complete replacement for your factory blue plastic cap to really smarten up the under bonnet visuals. Secure location via the nylon retaining ring. High-gloss midnight black finish with laser-etched logos. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Each cap starts life as a solid billet of 6061 aluminium. Meticulously machined  with the latest CNC 5-axis technology. Nylon retaining ring replicates the factory indexing tabs to keep the cap aligned straight. Polished, then gloss-anodised to stay beautiful, year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Three luxurious finishes://  Gunmetal Grey//  Star Silver// Gloss Black *NEW* At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details SKU: VWR600360BLK

Read more less

SUPERCAR PERFORMANCE. RACINGLINE'S OEM+ STAGE 3 TURBO KIT: INTELLIGENTLY DESIGNED FOR EXCEPTIONAL POWER. Combining everyday usability with devastating performance just one squeeze of the throttle away.All for great value. FIT IT.  THEN ENJOY IT. RacingLine's OEM+ Stage 3 upgrade offers a complete, turn-key package that is entirely usable on a daily-driven car yet offers devastating performance just one squeeze of the throttle away.     An exceptional value package of the highest quality, intelligently-designed hardware, matched in to our superb OEM+ Performance Software. Reliability comes as standard - fit it, then just enjoy it! A complete package solution that blends supercar performance with everyday practicality. The heart of the Stage 3 kit is our significantly re-engineered IS38 turbo - featuring our own turbine wheels and high-spec bearing pack inside. By retaining the housing of the IHI turbo, fitment is simple and cost-effective, reusing the factory oil and coolant lines plus gaskets with no aftermarket connections or adaptors to worry about. Developed and supplied as a full, complete install kit combining our hardware with our matched OEM+ software for a true 'Plug and Play' solution. The result? Expect 480hp, amazing driveability, and on a 4WD DSG car 0-60mph/100kph in around 3 seconds. True supercar performance.   For IS20 (smaller turbo) cars such as Golf 7 GTI, expect a power output of 450bhp. POWER GAINS Power gains are sensational. This package is more than capable of delivering over 500bhp - although we have calibrated it to a safer level of 480bhp, confidently leaving plenty in reserve. DRIVEABILITY Drivability and reliability are right up there alongside outright performance. By using the stock IHI housing, a low-lag spool on the turbo and great efficiency ensure power, smoothness ...and even surprising economy.   OEM+ SOFTWARE The OEM+ Stage 3 kit uses our beautiful OEM+ software - developed specifically to match the Stage 3 hardware and tested over many years. Right first time, every time.  MATCHED HARDWARE Our Stage 3 kit is not just about bolting a big turbo on. It comes with our matched hardware parts, all developed to flow alongside one another. RELIABLE INSTALLATION One of the main reassurances of our OEM+ Stage 3 is that all the turbocharger's factory mountings oil lines, even gaskets are retained. No aftermarket fixings, no adaptors, no worries. SUPPORTING COMPONENTS As well as the Stage 3 kit itself, our full range of other supporting hardware has been developed alongside.  From R600 intake, Intercooler, Oil Management, Downpipe, it’s all perfectly matched together. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Our OEM+ Stage 3 turbo reuses the stock factory IHI turbocharger housing as its basis with massively uprated, re-engineered high-flowing internal componentry. Each turbo is built in the UK, balanced, checked and tested to in excess of its maximum operating speed on a Vane Flow Test Rig Race-spec 360° thrust bearing packs plus increased shaft diameter Complete new CNC machined turbine/ compressor billet wheel Cut-back high flow turbine wheel for higher flow capacity All internal flows inside the housing ported and smoothed to support increased airflow STAGE 3 TURBO PERFORMANCELet’s be honest, nobody chooses the Stage 3 upgrade for any reason other than performance.   Instant, supercar-like power is the reason we do this! But the RacingLine Performance OEM+ Stage 3 kit offers you much more besides, in terms of driveability, simple installation and reliability.  Our Stage 3 power and drivability is exceptional. Although power has exceeded 500bhp with ease in our dynamic testing, we have calibrated this full package with our OEM+ Performance Software to deliver a little less - a safe and repeatable 480bhp. What this means is true supercar performance levels. In the 4Motion cars, equipped with DSG gearbox, expect to clock around 3 seconds 0-60 (100kph) times, with the potential for quarter mile times in the low 11 / high 10 seconds. CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > Audi S3 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 2.0 TSI 190hp 3V 2019+

Read more less

FULL ALIGNMENT. KEEP YOUR ALIGNMENT WHERE IT SHOULD BE. Our new MQB RacingLine Subframe Alignment Bolt Collar kit cuts out the huge factory tolerances for accurate alignment each time, every time. WHAT'S THE PROBLEM? The RacingLine Alignment Bolt Collar kit is a simple ‘why not’ upgrade to eliminate the challenges caused by large tolerances in the factory subframe mounts, both front and rear.   The OEM subframe design uses really oversized bolt holes – giving a wide range of adjustments to shuffle the whole subframe assembly back and forth, side to side.   Whilst that may be ideal for dealers & repairers to lazily mask other misalignments in the chassis, it means that there are also huge opportunities for inaccuracy every time your subframes are refitted, not to mention the risk of the car’s alignment creeping out of tolerance with hard driving over time. WHAT IT DOES. Our precision-engineered, push-in Bolt Collars centralise the subframes by cutting out the huge hole tolerances, so perfectly centring the bolt locations every time you refit. The result? With correct alignment, you’ll keep precise steering, sharper handling and braking responses every time. By ensuring complete accuracy every time you refit your subframes, you’ll save time and cost by ensuring consistent, hassle-free alignment each time, every time.  With no need for alignments after refitting subframes in future, this really affordable upgrade will likely pay for itself many times over. No additional NVH transfer into the car and no more creaking mounts. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Full kit of 16x Bolt Collars for front and rear subframes High quality T6061 billet aluminium construction CNC construction, anodised gloss black to last Precision machining means tighter alignment specs  Simple, quick push-in fitment into OEM subframes No modification to subframe or car body is required, so fitment is completely reversible. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+

Read more less

Racingline RP700 Rear Brake Pads Our new RP700 Brake Pads are replacement brake pads for cars using the standard brake hardware, with applications for multiple MQB (and some other) performance models. Drive your car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP700 Brake Pads come in. Using an advanced high friction material, these new pads provide a dramatic improvement in the braking department.  A straight replacement for the factory pads using the standard brakes, yet delivering a much higher resistance to high temperature fade.

Read more less

Racingline RP700 Performance Brake Pads – 312/340mm Larger Brake Setup Drive your car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP700 Brake Pads come in. A straight replacement for your factory pads, using the standard brakes, yet delivering a much higher resistance to high temperature fade. You will gain a lot of performance with our upgraded brake pad set. These new High Performance RP700 Brake Pads use an advanced high friction material to provide a dramatic improvement in the braking department. Ideal for demanding driving. Perfect for fast road driving and occasional track day use. Yet without any compromise in daily driving Designed for use with your car’s factory brake hardware – simple direct replacement fitment Extensive testing of our RP700 compound has found the sweet-spot between excellent cold bite and high temp fade resistance A key development focus has been around perfecting pedal feel – resulting in progressive braking with unparalleled pedal response Available as sets of front pads or rear pads, with multiple applications (see below). Unlike other aftermarket pad brands, we offer two choices of rear pad, to suit either ventilated or solid rear discs. Pad Options VWR670004 – FRONT: // To Suit 312mm discs VWR670006 – FRONT: // To Suit 340mm discs HIGH PERFORMANCE Our key development brief for the RP700 pads is to deliver near-zero brake fade under high temperature use, yet without requiring a warmup period – essential for cars that have to perform in daily driving, fast road and occasional track use. RP700 COMPOUND Our testing programme has been underway for over a year on road and track. The resulting medium hardness pad construction uses an aramid fibre compound that gives the ‘sweet spot’ of high performance and an unrivalled pedal feel underfoot. ECE R 90 APPROVED It’s a legal requirement in most countries to carry ECE R90 certification – yet many aftermarket pads do not. Giving you the peace of mind that the pads will work just as well when cold as when up to full track temperatures.  

Read more less

Racingline VW Up! GTI/1.0TSI Air Intake System – VWR12UPGT The highest-performing, race-bred cold-air induction system for up! GTI 1.0 TSI. Plus, it’s not just an intake. The new RacingLine system includes our Turbo Inlet Elbow to guarantee the best possible performance from your intake system. The VWR Cold-Air Intake System is simply the most complete induction package available for the up! GTI… The package combines two components together – the intake itself plus the Turbo Inlet Elbow. Without these two elements flowing in harmony you’d be wasting a lot of your hard-won power gains. Together these upgrades allow greatly increased airflow from your intake into the turbo for lightning fast turbo response and a worthwhile power gain. Our High-Flow TriFoam™ triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved. Each Trifoam® filter is carefully handmade in the UK. Confirmed Applications Volkswagen UP GTI 2016+ Volkswagen UP 1.0 TSI 2016+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR12UPGT-PAR

Read more less

Racingline Cup Edition Intake Package – Mk7 Golf ‘R’/GTI, Audi S3 8V/TTS, Cupra 280/290/300 and Skoda Octavia VRS The brilliant looking Racingline Cup Edition intake package is suitable for stage 1, 2 and 3 vehicles or anyone looking for that extra air intake power and sound on MQB, Mk7 and 2.0TSI vehicles. RACINGLINE CUP EDITION INTAKE The VWR Cold-Air Intake System kit delivers cold fresh air from outside the engine bay straight to your engine via a large-diameter free-flowing intake pipe. The intake uses an oversize domed High-Flow TriFoam™ air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow with lower restriction, to ensure that the largest volumes of the coolest possible air is available to the engine at all times. This maximizes efficiency and improves driveability and torque throughout the rev range – turbocharger spool dropped nearly 500 RPMs, reducing turbo lag and creating faster turbo response. TURBO INLET PIPE Another essential element to the airflow between intake and turbo is our Turbo Inlet Hose. Replace the restrictive standard plastic ‘bellows’ pipe with our free-flowing, ultra smooth reinforced silicone pipe. TURBO 90 INLET Release a valuable power increase comes from fitting our ‘thin wall’ Turbo 90 Inlet to replace the highly restrictive standard plastic MQB elbow. Compatible with all intake pipes and all factory turbos, and beautifully machined and gloss-anodised for a perfect, simple fitment. Optional TURBO MUFFLER DELETE A valuable part of your MQB car’s smooth breathing – replace the disruptive airflow of the stock part with our precisely-machined single-piece Turbo Muffler Delete. And, as a side benefit, you’ll get to hear your turbo working at last.   Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less