FREE SHIPPING ON ALL EXHAUSTS (UK Mainland Only)
TrustPilot Rating 4.6 ★★★★☆ - EXCELLENT - Read our 840+ Reviews

CloseClose
CloseClose
Close

Exhaust Systems

1569 products

Date, new to old

  • Featured
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
    • AIRTEC Motorsport Fiesta ST180 Decat - Car Enhancements UK

      Airtec AIRTEC Motorsport Fiesta ST180 Decat

      Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO7

      £218.73 - £240.61

    • AIRTEC Motorsport Fiesta 1.0 EcoBoost Decat - Car Enhancements UK

      Airtec AIRTEC Motorsport Fiesta 1.0 EcoBoost Decat

      Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO8

      £224.87 - £246.61

    • Ford Fiesta Mk7 ST180 1.6 EcoBoost – Mongoose Downpipe/Decat - Car Enhancements UK

      Mongoose Ford Fiesta Mk7 ST180 1.6 EcoBoost – Mongoose Downpipe/Decat

      Mongoose are proud to release their new product for the Fiesta ST180 1.6 Ecoboost. Our modular design initially looks complicated but it all has a reason 1, Mongoose designed this using 76mm Pipework and flexi section, this was then split into two parts to make it easier to ship and to install. 2, The flexi section comes as 2 different options, with either a 2.5” flange or 3” flange on the end where it meets the rest of the cat back system. We wanted to make a true 3” bore system for this vehicle, but when we tested the 3” flange up against an OE cat back we found that the flange on the OE cat back is only 78mm tall and with a 76mm hole this would only give 1mm each side for the gasket to seal which is not good enough and will most likely end with a leaking joint. 3, The mongoose decat is available with a 2.5” flange so it mates up to and OE system if you like or you can purchase it with a 3” flange to mate up to a Mongoose 3” cat back system (also we now do a 3” adaptor for the cat back system giving a full turbo to back 76mm bore) Part No – FD037 We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

      £305.00

    • Mongoose Fiesta ST180 1.6 litre EcoBoost Cat back with x 4 tailpipe options - Car Enhancements UK

      Mongoose Mongoose Fiesta ST180 1.6 litre EcoBoost Cat back with x 4 tailpipe options

      As used on the AS/AIRTEC ST180 demonstrator, great sound and x 4 different tail pipes to choice from Twin 4" rolled outwards 4" rolled inwards Large Oval We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

      £625.12

    • Ford Fiesta Mk7 1.0 EcoBoost MONGOOSE cat back system - Car Enhancements UK

      Mongoose Ford Fiesta Mk7 1.0 EcoBoost MONGOOSE cat back system

        Suitable for Ford Fiesta Mk7 1.0 Ecoboost 2012on (fits all 100bhp, 120bhp and 140bhp models) - For the ultimate in sound and performance the only choice has to be Mongoose. Pipework Bore – 57mm High quality T304 stainless steel aftermarket performance exhausts with Mongoose’s lifetime guarantee. All Mongoose systems offer superb fit, exceptional build quality, performance increase, great looks and the ultimate in sound. Please note that those vehicles fitted with catalytic converters as standard should remove them for competition / display use only. *PLEASE NOTE* The vehicle will not pass an M.O.T with a de-cat pipe fitted. Part No – FDS038-X3 You will also need a Zetec S rear valance when fitting this system Part no: 1833264 available from your local Ford dealer. We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

      £559.91 - £787.50

    • Sale -10% Milltek Sport - Downpipe with Decat or Sports Cat - MK7 Fiesta 1.0 EcoBoost - Car Enhancements UK

      Milltek Sport Milltek Sport - Downpipe with Decat or Sports Cat - MK7 Fiesta 1.0 EcoBoost

      This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS: Ford Fiesta Mk7/Mk7.5 1.0T EcoBoost (100/125/140PS) 2013 to 2017 NOTES: Requires a Stage 2 ECU remap Select correct fitment Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

      £314.65 - £675.12

    • AIRTEC Motorsport Tubular Exhaust Manifold for Fiesta ST 180 - Car Enhancements UK

      Airtec AIRTEC Motorsport Tubular Exhaust Manifold for Fiesta ST 180

        Tubular manifold for Fiesta ST 180. Perfect for fast road or race. Best performance when used with stage 3 Fiestas. The tubular manifold for the Fiesta ST 180 will see best performance gains when used with a stage 3 setup, hybrid or big turbo setups will see the best imrpovements. Stage 1 cars - A standard manifold on a Stage 1 Fiesta will perform perfectly, an upgraded manifold on a stage 1 car will see faster turbo spool but will not see a huge improvement over standard. Stage 2 cars - Higher power cars will see faster turbo spool and some power increase of around 3-5 bhp. This is very hard to prove on a dyno on a stage 2 car. Stage 3 cars - A turbular manifold is a must have for any stage 3 Fiesta! The standard manifold will be finding it hard to release the air with the manifold pressure not being able to cope with the power. A tubular manifold has a massive increase in air flow which could see big gains compared to standard.

      £601.68

    • Sale -10% Ford Fiesta ST180 Mk7 Milltek Rear Silencer Delete Assembly - Car Enhancements UK

      Milltek Sport Milltek Sport - Rear Silencer Delete (Addon) - Ford Fiesta MK7 ST180 & St200

      0 Reviews

      This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Milltek Sport Fiesta ST 180 Back Box Delete Pipe - Race Pipe - Milltek Sport Exhaust You must already have a milltek exhaust to install this product fits: Ford Fiesta Mk7/Mk7.5 ST 1.6 litre EcoBoost 182PS & ST200 2013 to 2017 The Milltek Cat Back Exhaust system has many different versions, all contain a rear silencer box but there are two versions already. Non Resonated - which has theperfect mid ground tone(Race) Non Resonated - which was the loudest availableand Now Milltek have made this !!The Full Race Rear Box Delete which lifts noise another step higher whilst still providing a beautiful deep tone. This Milltek Rear Box Delete for the Fiesta ST180 will fit all existing Milltek systems and remove the rear silencer totally from the car. Your existing Milltek detatchable tail pipes will fit the two outlet pipes and exit in the excat same place as they do now NOTES: Not for Road Use Designed for Motorsport / Race Applications only to be fitted to Milltek Sport Exhaust only Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXFD200 2.76'' (70mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

      £185.95£167.35

    • Sale -10% Milltek Sport - Cat Back Exhaust (Multiple Options) Fiesta MK7 1.0 EcoBoost - Car Enhancements UK

      Milltek Sport Milltek Sport - Cat Back Exhaust (Multiple Options) Fiesta MK7 1.0 EcoBoost

      FITS: Ford Fiesta Mk7/Mk7.5 1.0T EcoBoost (100/125/140PS) 2013 to 2017 NOTES: FITS AS STANDARD TO ALL ZETEC S / ST LINE MODELS CAN BE FITTED TO NONE ZETEC S / ST LINE MODELS WITH THE ADDITIONAL OF THE ZETEC S / ST LINE REAR VALANCE (FORD PART NUMBER 1833264)   Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK. Resonated: Resonated (quieter). Polished Tips. Requires Fiesta Zetec S rear valance (part number 1833264) available from your local Ford dealer Part No. Description Tailpipe Pipe Diameter Race EC MSFD239 Connecting Pipe from Milltek Cat Back to OE Cat 2.37" (60.30mm) MSFD241 Front Silencer MSFD200 Over-Axle Pipe MSFD201 Rear Silencer Assembly Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

      £638.13 - £1,076.78

    Exhaust Systems
    Close