Performance - Audi RS3 8V (2012-2020)

Our disc installation kit comes with everything you need to install these 2 piece discs to your Audi RS3 8V or TTRS 8S. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 362x32 2 piece front brake discs4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving style

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less

Type of Application:DS2500 - Off Road Use'Track Day' - Front and Rear of vehicle'Rally' - Rear of vehicle'Circuit Sprint' - Rear of vehicle'Formula' - Front and Rear of vehicle DS3000 - Off Road Use'Rally' - Front and Rear of vehicle'Circuit Sprint' - Front of vehicle'Formula' - Front and Rear of vehicle As a general guide we recommend that you consider the following when making your material compound selection: 4WD cars = same compound front and rear Rear traction cars = same compound front and rear. Front traction cars = high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003). For further advice please contact us. DS2500 (H)Track day & light race use for all vehicle types.Road style refinement but with race material ability to withstand heat with respect to life and μ.Average friction coefficient of 0.42 over working temperature range of 20°C to 500°C. DS3000 (R)Heavy duty all-round material choice.Multiple applications - touring car, rally, single seat.Average friction coefficient of 0.48 over working temperature range of 200°C to 650°C.

Read more less

Genuine VAG set of rear brake pads. Part number: 8V0698451G

Read more less

Wheel spacer and bolt kits to suit your 5x112 / 57.1mm VAG vehicle for a quick and easy solution.These kits are designed to work with Genuine OE Alloy Wheels and come with the Wheel Spacers and the correct wheel bolts to suit. We highly recommend that you measure your vehicle fully loaded to see what size spacers are required. Notes: - Wheel spacer sizes should be carefully considered- Wheel bolts included use the standard 17mm Hex, so no need for any special tools- Designed to work with Genuine OE Alloy Wheels - May not be compatible with Aftermarket Alloy Wheels- Wheel bolts should be tightened to 120nm (88.5lb/ft) and rechecked after 25 miles. 

Read more less

Racingline Brake Kit 5mm Hub Adaptor (Pair) 5×112 – VWR620005MM Clearance over big brake kits is always a challenge, especially with factory wheels. All of RacingLine’s brake kits feature our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car. Fitting and removal of the Hub Adaptor is a simple, reversible upgrade that takes minutes to do. If you ever plan to change wheels in the future, or if you run different wheels for road or track, or winter and summer, just fit or remove the adaptors to suit. As these Hub Adaptors are mechanically locked onto the disc hub, They aren’t  classified as spacers in countries where spacers are illegal. The 5mm of extra space will mean that the OEM factory wheels will fit over our brake kits. POSITIVE FIXATION  Clever ‘petal’ design (female on the disc, male on the Hub Adaptor) plus a fixing screw physically locks the two parts together. HIGH QUALITY Beautiful midnight-black gloss anodised finish will keep the Hub Adaptors looking beautiful and  corrosion -free. INSTALL & REMOVE Removal and refit just takes minutes to do if you ever change your wheels. Perfect for the: RacingLine Stage 2 Monoblock Performance Brake Kit RacingLine Stage 3 Forged Monoblock Performance Brake Kit​ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR620005MM

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

Racingline Front Subframe Brace for MQB/MQB EVO MQB & MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving. ​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics. Not surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes. RacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. This is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track. Confirmed Applications For all MQB & MQB EVO AWD ModelsVWR810006 VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat 2.0 TSI B8 2015+VW Arteon 2.0 TSI 2017+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 TSI 2016+VW Jetta VII GLI 2018+ Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Tarraco 2.0 TSI 2018+SEAT Leon III 5F 2015-2020 Cupra Leon IV FW 2020+Cupra Ateca 2018+Cupra Formentor 2020+ Skoda Octavia IV vRS NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 5E 2014-2020Skoda Superb III 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810006

Read more less

We welcome to Awesome's range of products the all new RacingLine Cold-Air Intake System kit for the current Audi RS3 FL and TTRS (DAZA and DWNA engines). It enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars.  Our giant High-Flow TriFoam™ triple-layer filter unit is at the heart of the intake.  As always for RacingLine intakes, each filter is handmade in the UK - this one has an exceptional surface area increase, being 42.5% larger than the factory filter at 95,717mm2. The new Cold-Air Intake System uses stunning matte 3K twill carbon fibre construction for the front scoop, intake canister and 3.5" (90mm) rear intake pipe for ultra-light weight and impressive thermal insulation to keep IATs down. The full-width front scoop captures cold, dense air via its two large intakes, and uses clever internal ducting to smooth airflow into the filter canister with minimal turbulence. It's not just about performance either; the stunning carbon weave of the intake will enhance your engine bay every time you lift the bonnet!  Welcome to our new Cold-Air Intake System kit for the current Audi RS3 FL and TTRS (DAZA and DWNA engines). It enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars.   Our giant High-Flow TriFoam™ triple-layer filter unit is at the heart of the intake.  As always for RacingLine intakes, each filter is handmade in the UK - this one has an exceptional surface area increase, being 42.5% larger than the factory filter at 95,717mm2.    The new Cold-Air Intake System uses stunning matte 3K twill carbon fibre construction for the front scoop, intake canister and 3.5" (90mm) rear intake pipe for ultra-light weight and impressive thermal insulation to keep IATs down.   The full-width front scoop captures cold, dense air via its two large intakes, and uses clever internal ducting to smooth airflow into the filter canister with minimal turbulence.    And it's not just about performance; the stunning carbon weave of the intake will enhance your engine bay every time you lift the bonnet! 

Read more less

Racingline Billet Underbody Tunnel Braces Want to sharpen up your MQB handling responses? MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust system. What do they do? MQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body’s weaker points and limit chassis flex under demanding loads. Our new Billet Underbody Braces replace these weak braces with intricately machined aluminium replacements, greatly improving stiffness, giving much better exhaust clearance and even look great! CNC Machined from a solid billet of 6061-T6 Aluminium, each brace has been engineered to remove unnecessary material whilst still increasing rigidity. With any 3″ diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, our new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible. We offer two braces – a Centre and a Rear Tunnel Brace. Owners of FWD cars can fit both, AWD cars can only fit the Rear Tunnel Brace. Looking to fit a larger bore Exhaust System? For large diameter aftermarket exhausts, there simply isn’t clearance space above the factory tunnel brace. Many owners have no choice but to remove the brace. But the brace is there for a reason. With the extra clearance our Rear Tunnel Brace gives, you can now maintain strength and fit your bigger exhaust. VWR810005 – Rear Tunnel BraceVWR810004 – Centre Tunnel Brace (Front-wheel drive only)

Read more less

REVO RF0 WHEEL LIGHTWEIGHT. STRONG. FLOW FORMED.  OVERVIEW The RF0 wheel is a flow-formed alloy that's lightweight yet exceptionally strong, designed in-house at Revo HQ in the UK. Flow forming is one of the most advanced manufacturing technologies to enter the wheel industry. Flow Forming Technology involves the application of pressure to the inner barrel of the wheel while spinning and after it has been cast. This process stretches and compresses the aluminium, which increases tensile strength. In this respect, the process shares similar properties to those found in the forging process. The final product is lighter, stronger, has increased elongation, and much greater shock resistance as well as an increased load capacity over regular cast wheels. Whilst the RF0 wheel shares a similar design concept to our previous generation RV0, the more advanced manufacturing process offered through flow forming allows for more definition in the design, particularly noticeable in the spokes and rim edge fillets. By reducing the weight of your wheels 'unsprung weight' your suspension starts to have a much easier time. Each bump can be controlled more quickly and easily. This helps keep your tyre in contact with the road for longer, which is obviously great news for car control and braking. Reducing the 'rotational mass has its benefits too. A classic/timeless motorsport look featuring an embossed Revo logo and branded centre cap to compliment the subtle styling. Available in a choice of Hyper Silver, Gloss Black, Matte Bronze & Matte Anthracite. BENEFITS Flow formed manufactured Lightweight under 12kg Fits Revo big brake kit* COLOUR OPTIONS Gloss Black Matte Bronze Matte Anthracite Hyper Silver   FITTING  RF020 Wheel 20 x 8.5j, 5 x 112, ET45, CB 66.6mm – The below fitments will require a 66.6mm to 57.mm spigot ring which is included with this wheel size. Manufacturer Model Variant Year Audi A3 / S3 / RS3  All 2012 > Audi TT / TTS /TT RS All 2014 > Audi A4/A5/A6/A7 5 All 2007 > Seat Leon All 2012 > Skoda Octavia All 2014 > VW Golf All 2014 > VW Golf GTI / R All 2014 > VW Beetle All 2011 > VW Caddy All 2003 > VW Passat All 2015 > VW Tiguan All 2016 >   REVO BIG BRAKE KIT The RF020 wheels were also designed to fit with all Revo brake kits without the need for spacers.     Notes: The fitment table above is a guide, please check your individual vehicle for correct fitment. When using the RF0 wheels on track it is advised that you remove the centre caps from the wheel to avoid distortion due to excessive heat transfer Price includes x1 RF020 wheel, Tyres not included. Before installation of any wheels please ensure that you have the correct bolt fitment with the correct seating radius. Failure to do so could result in poor fitment and potential damage to your wheels. No Spigot ring is needed for this vehicle.  Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Please select the correct version to match your existing paddles. Printable templates are available here:Click for Version 1 - TemplateClick for Version 2 - TemplateClick for Version 3 - TemplateClick for Version 4 - Template For the ultimate driving experience, you need the connection directly at your fingertips. Leyo Motorsport understands that when it comes to perfecting the exit of an apex, gear changes need to be precise and fluently timed. Welcome to the greatest edition and interior modification for you performance vehicle, the Leyo Motorsport Aluminium paddle shifters. Made from 6061 billet aluminium, these shift extensions will be the classiest addition to your interior yet. Available in multiple finishes and coated with a hard anodised finish, Leyo Motorsport have truly delivered on our most in-demand product.Leyo Motorsport endeavours to get you the purest driving experience by manufacturing products that are race proven with durability in mind. Order today and pursue your very own ultimate driving experience. Click Here for an Installation Video The ultimate addition to your performance vehicle. Patented design (Pending). Direct OEM bolt-on. Clips right over existing paddle shifters. Comes with all components required to get your car looking amazing. Ergonomic back CNC surface.  Scratch Free for your OEM plastics paddle. NOTES: - Whilst version 1 is the correct shape for an 8P A3, S3 and RS3, they infact do not fit the 8P Models. - THESE WILL NOT FIT VW / SEAT / SKODA MODELS! 

Read more less

Introducing the Leyo Motorsport performance downpipe for the facelift RS3 8V (400HP)! Perfect for stage 2 and beyond with its de-cat design. This downpipe is a must for anyone serious about maximizing the full potential of their RS3.

Read more less

LEYO Cold Air Intake System for the Audi 8V RS3 guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain.  Leyo Motortsport proudly presents their all new Cold Air Intake for the facelifted Audi RS3 with the all new 400HP aluminum block.  This intake builds on the airbox design of their pre-facelift RS3 intake while integrating factory dampening design on the intake pipe.  The intake pipe with the wide 89mm filter flange tapering to 76mm creating a velocity stack design efficiently feeds cold air into the turbo. Specially designed air box prevents heat soak, effectively extracting colder induction air. For those that wants the open airbox design, Leyo RS3 intake airbox can be both enclosed or open.  No fabrication required for installation, bolts straight onto factory mounting points. Notes:- This intake does not fit the Pre-Facelift 8V RS3 (-2017)- This intake does not fit GPF equipped 8V RS3 Facelift (2019+)- Suitable for DAZA Engine Facelift RS3 8V (2017-2019)

Read more less

LEYO Cold Air Intake System for the Audi 8V RS3 guarantees greater air induction volume, colder intake air temperature and smoother air flow for superior power gain. LEYO Cold Air Intake System was designed with the ultimate goal of maximum power gain. Made with high grade full aluminium 4 inch diameter tubing  ensuring greater, smoother air flow with minimal restrictions and effective heat dispersion.LEYO R&D team also optioned for quality proven LEYO double cone filter element for uncompromising filtration, performance and ease of maintenance. Specially designed air box prevents heat soak, effectively extracting colder induction air.For those that want the open airbox design, Leyo RS3 intake airbox can be both enclosed or open.No fabrication required for installation, bolts straight onto factory mounting points.  Notes:- This intake does not fit the 2017+ aluminium block 8V RS3

Read more less

Racingline Performance Carbon Fibre Rear Body BraceThe new Rear Body Brace fits Hatch and Sportback A3 / S3 / RS3 8v models. It uses solid billet aluminium mounts secured into beautiful, ultra-stiff 3K-twill carbon fibre link bars to drastically stiffen the rear of the chassis.Modern cars like the Golf run a pretty stiff laser-welded body-shell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially when combined with stiff suspension or under the sort of loadings that track use puts on the car. The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.  By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the body-shell flex, and the suspension geometry can work as it was designed to do.Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling needed and no removal of trim required, and is completely reversible.RacingLine haven’t forgotten about practicality either. The brace is compatible with rear seats in either the up or down position, and due to the slim profile, boot space is almost unaffected. Even the load tie-downs have been incorporated into the lower mounts. Track your car on Sunday, school-run on Monday! Fitment Info:- Audi A3 8V 3 Door Hatch- Audi A3 8V Sportback - Audi S3 8V 3 Door Hatch - Audi S3 8V Sportback- Audi RS3 8V Sportback

Read more less

Magnetic Differentialoil plug kitfor all Volkswagen  I  Audi  I  Cupra  I  Skoda KEEP YOUR AWD DIFFERENTIALS AND TRANSFER BOX PROTECTED Catch any ferrous particles in your oil with our RacingLine Magnetic Differential Oil Sump Plug set What does it do? Our new Magnetic Differential Sump Plug set attracts and separates out the minute abrasive and ferrous metal particles that are carried by the oil, stopping them circulating through your diff's lubrication system. Under the skin of your MQB Haldex AWD car you've got a rear differential and centre transfer box working hard underneath you. The harder you use your car, the higher your power, the greater the risk of minute metallic debris and the greater the benefit of using this Magnetic Differential Sump Plug set. The Magnetic Differential Sump Plug traps and removes those microscopic metal particles from your diff's lubricating oil. Install couldn’t be simpler – choose our Magnetic Differential Sump Plug set with your next oil-change and simply screw the new plugs in!  WHAT'S IN THE KIT? As the factory plugs are single use, our kit gives you enough washers for five services - meaning you might even save money in the long-term! MAGNETIC OIL DRAIN PLUG NON-MAGNETIC OIL REFILL PLUG 10x WASHERS - ENOUGH FOR FIVE SERVICES PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Magnetic end to ensure any metallic particles in differential oil are collected. CNC constructed from billet T6-6061 aircraft grade aluminium. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS VWR180003 (for all applications) ALL WHEEL DRIVE 'HALDEX' CARS   Suitable for all recent 'Haldex' all wheel drive cars & SUVs, all engine types.   Two Sump Plug Sets per car :  front AWD Transfer Box and Rear Differential. (For older cars such as Golf 6 R, Audi S3 8P, Golf 5 R32 only rear diff plug fits) ​ Including: > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 Alltrack 2013-2020 > VW Passat 2.0 BiTDI 4Motion B8 2015+ > VW Arteon 2.0 BiTDI 4Motion 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 BiTDI 2016+ > VW Tiguan II 2.0 TSI 190ps 2018+ > VW Golf 5 R32 2005-2008 > VW Golf 6 R 2009-2014 > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi TTS II 8J 2008-2014 > Audi TTRS II 8J 2009-2014 > SEAT Leon III Cupra ST 4Drive 5F 2017-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 310ps 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 190ps 2018+ > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+

Read more less

DSG OIL FILTER HOUSING STUNNING MIDNIGHT-BLACK GLOSS BILLET DSG OIL FILTER HOUSING REPLACEMENT. It’s all about the details, and that includes your engine compartment. WHY CHANGE DSG OIL FILTER HOUSING? The latest addition to our range of exquisite under-bonnet billet parts are these beautiful billet RacingLine DSG Oil Filter Housings for Golf R, GTI, Audi S3 and more.   This solves the issues of warping and leaking that affect the standard item, and acts as a heat-soak to reduce oil temps. It's made to match OEM dimensions right down to the original factory size hex nut. With much improved heat conductivity over the plastic original, it significantly helps with gearbox oil cooling.  The DSG Filter Housing still accepts the factory gearbox oil filter to maintain simplicity and keep that OEM fitment for your future oil changes.  A quality part means you can forget about the problems of cracked & warped plastic housings forevermore. 6-SPEED GEARBOX DQ250 VWR19G708 7-SPEED GEARBOX DQ380/381 DQ500 VWR19G709 PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined  with the latest CNC 5-axis technology Acts as a heat soak to help reject heat from the gearbox oil to atmosphere Polished, then gloss-anodised to stay beautiful for year after year CONFIRMED APPLICATIONS There are two different types of DSG filter housing, depending on your gearbox type: ​ 6-speed DQ250:                   7-speed DQ380/DQ381/DQ500:    VWR19G708 VWR19G709 > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi A1 Competition 207ps 40TFSI GB 2021+ > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Octavia III vRS 2.0 TDI 5E 2014-2020 > Skoda Octavia II vRS 1Z 2004-2013 > Skoda Superb III 3V 2015+ > Skoda Karoq 2.0 TSI 190hp 2018+ > Skoda Kodiaq vRS 2018+

Read more less

High-Flow Panel Air Filter – TT RS (8S) RS3 (8V) – VWR1130RS Looking for a simple, warranty-friendly upgrade for your car? Racingline’s HIgh-Flow Panel Air Filter for the latest and greatest Audi RS3 8V.2 and TTRS 2.5 TFSI cars replaces the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam filter. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, Racingline’s Panel Filter allows a small but worthwhile increase in airflow through to the turbo.    Simply put, it’s the best panel air filter you can buy. TRIFOAM® FILTER Racingline’s unique Trifoam® filter construction allows them to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty. CONFIRMED APPLICATIONS > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TTRS 2.5 TFSI 8S 2017+ > Audi RSQ3 F3 2019+ > Cupra Formentor VZ5 2.5 TFSI 2020+

Read more less

PLEASE ENSURE YOU MEASURE AND ORDER THE CORRECT SIZE FOR YOUR VEHICLE AS THIS PRODUCT IS MULTI SIZE / VEHICLE FITMENT REAR ANTI ROLL BAR BUSH 18.5MM PFR85-815-18.5   OEM Part Number: 5Q0511305AQ Size 18.5mm --- REAR ANTI ROLL BAR BUSH 18.5MM PFR85-815-18.5BLK   OEM Part Number: 5Q0511305AQ Size 18.5mm --- REAR ANTI ROLL BAR BUSH 19.6MM PFR85-815-19.6   OEM Part Number: 5Q0511305AR OEM Part Number: 5Q0511305BK OEM Part Number: 5Q0511305BC Size 19.6mm --- REAR ANTI ROLL BAR BUSH 19.6MM PFR85-815-19.6BLK   OEM Part Number: 5Q0511305AR OEM Part Number: 5Q0511305BK OEM Part Number: 5Q0511305BC Size 19.6mm --- REAR ANTI ROLL BAR BUSH 20.7MM PFR85-815-20.7   OEM Part Number: 5Q0511305AS OEM Part Number: 5Q0511305BD Size 20.7mm --- REAR ANTI ROLL BAR BUSH 20.7MM PFR85-815-20.7BLK   OEM Part Number: 5Q0511305AS OEM Part Number: 5Q0511305BD Size 20.7mm --- REAR ANTI ROLL BAR BUSH 21.7MM PFR85-815-21.7   OEM Part Number: 5Q0511305AT /5Q0511305BF OEM Part Number: 5Q0511305BA / 5Q0511305BE OEM Part Number: 8V0 511 305 A / 8V0511305A Size 21.7mm --- REAR ANTI ROLL BAR BUSH 21.7MM PFR85-815-21.7BLK   OEM Part Number: 5Q0511305AT /5Q0511305BF OEM Part Number: 5Q0511305BA / 5Q0511305BE OEM Part Number: 8V0 511 305 A / 8V0511305A Size 21.7mm --- FITS: Audi RS3 MK3 8V (2015 - 2020), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen T-Roc 4-Motion inc R, Audi TT / TTRS Mk3 FV/8S (2014 on) Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Skoda Karoq 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Touran (2017 - ), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

If your car is fitted with adaptive cruise control, we can additionally supply you with a billet bracket and fixings to enable the relocation of the ACC radar. Simply select the ACC option in the drop down menu above. No re-coding of the unit should be necessary. Following on from our very successful intercooler for the RS3 8P chassis, the Forge intercooler for the RS3 8V chassis builds on our reputation for delivering cores that offer real-world increases in power and temperature drops. Whilst the 8V chassis shares many components with the older 8P, the space available behind the bumper is a different shape and the crash bar has also changed. This required a whole new intercooler and crash bar setup for this latest chassis* The RS3 8V core is a huge 640x250x100 and of bar and plate design. This gives it a huge 55% more surface area than stock, and an even more impressive 94% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with our FMKT024 boost hose set if you so wish. Just like on the 8P chassis, we supply a genuine Audi RS3 crash bar which we modify in house in order to accept the new larger core, then finish both the crash bar and core in our standard black crackle finish powder coat for maximum longevity. As shown in the graph above, for both tests we let the car heatsoak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of 36 deg C), then do a dyno pull from there. This gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM. On the standard car we tested on, it made 362bhp completely stock (so largely in line with what Audi quote) with a peak intake temperature of 58°C. With just this intercooler fitted and no other modifications, the same car made 386bhp with a peak inlet temperature of 23°C, a gain of 24bhp and a drop of 35°C. Gains on mapped cars will likely be even more impressive as the stock intercooler core really starts to struggle on stage 1 mapped cars. The kit contains full instructions for installation, which should take around 3.5 hours, and a complete kit which includes everything needed. The above dyno graph shows a Forge customer making gains of 52HP with this intercooler  5 / 5 stars - “In short, this product does what it states!” Working with Litchfield and their Technical Partners (Forge) I have conducted extensive testing to support the development of Litchfield tuning packages for the Audi RS3 8V. Whilst the OEM intercooler is “OK”, very rapidly on repeated road and dyno Wide Open Throttle (WOT) sweeps, the air charge temps quickly rise to levels that impact performance (pulling ignition). To extract the full potential out of the tuning packages and increase repeatability of results and improve overall reliability, I turned to Forge and their upgraded front mount intercooler. Not one for just using a product because of “sales speak”, I extensively tested the Forge offering. The conclusion based on the data logging, mapping and final results was clear. Monitoring charge temps with back to back tests instantly showed us that the cooling efficiency with the Forge product was significantly better. Comparing OEM intercooler charge temps for the coolest first run, against the Forge intercooler on it’s third repeated back to back run (really pushing this comparison with heat soak), the Forge intercooler saw a drop of 18degs peak over the OEM unit (on it’s coolest run with no heat soak). Repeated runs on the OEM intercooler saw the difference widen even more by up to 34degs higher (peak) than the Forge intercooler. Repeated runs between the OEM and Forge intercooler (all completed on the same day) saw the following peak values: OEM - 60degs Forge - 26degs The Forge intercooler also held the lowest charge temperature for longer. This sounds all fine and dandy but what does all this mean in relation to performance? First off Litchfield was able to develop their ECU calibrations without needing to worry about charge temperatures impacting performance. The car spent many hours on the dyno and completed many back to back runs. Over 30 different calibrations were created and tested. Not once did Litchfield need to let the car cool down between runs. The end result was a solid and repeatable 450+bhp achieved with only their ECU calibration, Forge Intercooler and secondary cat removal. Recently (March 2017), the car at this level of modification (Litchfield Stage 2) achieved a stonking 11.5s @ 118+mph quarter mile run at Santa Pod. This is the quickest time that we are aware of in the UK, for an RS3 8V at this level of modification using normal pump fuel, no weight reduction and on stock tyres. The car also achieved the 60mph sprint in 3.2s, the 100mph sprint in 7.9s and 100-200kmh sprint in 8.9s on this same run. I look forward to seeing how the Forge intercooler will complement Stage 3 development. Watch this space!   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This valve kit is an evolution of the FMARSDV dump valve we market for the 8P chassis RS3. It was developed for those who have tuned, or plan to tune, their 8S chassis Audi TTRS or 8V chassis Audi RS3 in excess of 450hp. Audi have seen fit to not change the design of the OEM dump valve from the previous RS3, so the same issues are carried over to the new 8V chassis, namely it was observed that cars over 450bhp were randomly getting errors from the stock solenoid dump valve not functioning. Whilst the stock valve will operate as designed, with the boost level necessary for 450bhp the stock valve couldn’t move the volume of air it needed to, so the ECU was seeing too great a positive boost in the MAP readings between gearchanges and assuming the stock valve wasn’t functioning correctly. We looked closely at this issue, and noted that there would be no real fix for this as the size of the hole for the valve is too small in the stock elbow. We decided that we would re-design and produce our own elbow, allowing a much larger DV port, which in turn would allow fitment of a larger valve to take advantage of it. We also improved the internal flow of the elbow and removed restriction within the valve. The elbow design has been changed by Audi to accommodate a different throttle body, so our design has changed too. *Please note this WILL NOT fit 2019 engine DNWA With the engine management on this engine being MAP based rather than MAF based, which is unlike many other Audi engines, we have also incorporated the option into the kit, of being able to run as a recirculation valve or with an atmospheric discharge/blow off.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This oil catch tank kit is for the Audi TTRS 8S and Audi RS3 2017-on, developed by our in-house development team. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. Extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend, particularly if you are planning more advanced power tuning at a later date. The 0.4l (400cc) catch tank boasts a collection of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap. The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F) Finally, this kit includes machined billet fittings that are anodised black to form an OEM-looking product when installed. Please note: We have found that on some late RS3 and TTRS models from 2019 onwards an additional breather has been added to the PCV. If your engine has the additional breather the catch can will NOT fit. To check this, remove your vehicles engine cover and check the visible PCV unit. Additional Breather No Additional Breather   Highlights 0.4L capacity*A drain tap for ease of emptyingA dipstick for simple level inspection2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous lookInner tube is constructed from anti-static smooth fuel resistant nitrile rubberOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapseTemperature Range: -54°C to +150°C (-65°F to 300°F)The engine cover can still be fitted after installationInstallation is straight forward with all necessary fittings and instructions included *Dipstick level is set at less than 0.4L for optimum breathing.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less