Performance - VW JETTA MK6 (2010-2019)

This is a performance enhancing induction kit for the VAG 1.2 & 1.4 TSI TFSI EA211 engine. This may fit other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Reduced turbo lag Turbocharger feels more responsive Enhanced BOV sounds What Does It Do? This induction kit delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated turbo inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

This is a performance silicone intake hose for 1.2 & 1.4 TSI TFSI EA211 engine. This kit fits other VAG vehicles with this engine, please see vehicle fitment compatibility chart. Features Improved throttle response Silicone inlet pipe Dyno results: max gains 5-7bhp (this may vary dependant on vehicle) What Does It Do? This induction silicone intake hose delivers increased air flow over the standard restrictive part. Whether this hose is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black silicone inlet pipe Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Audi A3 (8V) 1.4 TFSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI

Read more less

Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed! Even better driving dynamics and more exciting looks: H&R TRAK+ wheel spacers make your car even sportier! By moving the wheel out from the hub, TRAK+ wheel spacers widen the stance of the vehicle and lower its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you’ve been looking for. Like all of H&R’s street-engineered products, H&R TRAK+ wheel spacers are certified by the German Technical Inspection Agency (TÜV). H&R also has the correct wheel bolts or nuts to install TRAK+ wheel spacers on most cars, with original or aftermarket wheels. 40mm overall Axle spacers High strength, light weight aluminum/magnesium alloy CNC machined Anodized for optimum corrosion protection Available for most domestic and imported automobiles For use with original or aftermarket wheels (Studs may need shortening if aperture in rear of alloy wheel is not sufficient for clearance) Compatible with all suspension designs TUV approved SPECIFICATIONS Track widening per axle [mm] 40 Thickness [mm] 20 Number of Holes 5.0 Bolt Hole Circle Ø [mm] 112 Centering Diameter [mm] 57.1 Colour Black Registration Type with TÜV® certificate   Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

Make Model Sub-Model Engine Engine Type BHP Year Special Comments Front Brake Caliper Type VOLKSWAGEN Jetta Mk6 2.0 Turbo 200 2010-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo 200 2010-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo 211 2012-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo 211 2012-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo Diesel 110 2010-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo Diesel 140 2010-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo Diesel 150 2014-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo Diesel 170 2010-2018 ATE VOLKSWAGEN Jetta Mk6 2.0 Turbo Diesel 170 2010-2018 ATE

Read more less

This Performance intake kit is designed to fit the MK7 Volkswagen Golf, Audi, Seat Leon, and Skoda that have the EA211 - 1.4 TSI/TFSI engine. Features 70mm intake diameter Improves performance and throttle response Enhanced induction and turbo sound Full fitting kit and instructions Easy to clean using our filter maintance kit - CK-003 What Does It Do? This performance intake kit allows improved air flow and sound over the standard restrictive factory equipment. What Will I Get? Ramair Filters utilise the top-quality components in all their kits, see below for what this kit will include: Black powder coated heat shield Ramair Foam Filter Black powder coated aluminium intake pipe PVC intake ducting Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2014-2019 Audi Q3 (8UB/8UG) 1.4 TFSI 2014-2018 Audi A1 (8X) 1.2 TFSI 2014-2018 Audi A1 (8X) 1.4 TFSI 2014-2019 Audi Q2 (GA) 1.4 TFSI 2014-2019 Skoda Octavia (MK3) 1.2 TSI 2014-2019 Seat Toledo (KG) 1.4 TSI 2014-2019 Seat Toledo (KG) 1.2 TSI 2014-2019 Seat Alhambra (MK2) 1.4 TSI 2014-2019 Seat Ateca (KH) 1.4 TSI 2014-2019 Seat Leon (MK3) 1.2 TSI 2014-2019 Seat Leon (MK3) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.4 TSI 2014-2019 Seat Ibiza (6J/6P) 1.2 TSI 2014-2019 Skoda Octavia (MK3) 1.4 TSI 2014-2019 Skoda Superb (MK3) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.4 TSI 2014-2019 Skoda Rapid (NH) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.2 TSI 2014-2019 Skoda Yeti (5L) 1.4 TSI 2014-2019 Skoda Fabia VRS (NJ) 1.4 TSI 2014-2019 Skoda Kodiaq (NS) 1.4 TSI 2014-2019 Skoda Fabia (NJ) 1.2 TSI 2014-2019 VW Golf (MK7) 1.2 TSI 2014-2019 VW Golf (MK7) 1.4 TSI 2014-2019 VW Tiguan (5N) 1.4 TSI 2014-2019 VW Touran (MK2) 1.2 TSI 2014-2019 VW Tiguan (AD/BW) 1.4 TSI 2014-2019 VW Tiguan Allspace (AD/BW) 1.4 TSI 2014-2019 VW Passat (3G) 1.4 TSI 2014-2019 VW Beetle (A5) 1.2 TSI 2014-2019 VW Caddy (MK4) 1.2 TSI 2014-2019 VW Beetle (A5) 1.4 TSI 2014-2019 VW Caddy (MK4) 1.4 TSI 2014-2019 VW Passat (CC) 1.4 TSI 2014-2019 VW Polo (6R/6C) 1.2 TSI 2014-2019 VW Polo (6R/6C) 1.4 TSI 2014-2019 VW Touran (MK2) 1.4 TSI 2014-2019 VW Polo Blue GT (6R/6C) 1.4 TSI 2014-2019 VW Scirocco (MK3) 1.4 TSI 2014-2019 VW Sharan (MK2) 1.4 TSI 2014-2019 VW Jetta (A6) 1.4 TSI 2014-2019 VW Jetta (A6) 1.2 TSI 2014-2019 Audi A3 (8V) 1.2 TSI 2014-2019 Audi A3 (8V) 1.4 TFSI

Read more less

VWR 'Cup Edition' EVO 8.5 x 18" Alloy Wheels RacingLine's 'Cup Edition' EVO 8.5 x 18" alloy wheel has been developed for our track and race cars to give a track-orientated rim that's both ultra-strong yet light. Why choose 'Cup Edition' EVO? The VWR ‘Cup Edition’ EVO 18" Alloy Wheel has been a favourite for a decade for race and track cars to deliver an ultra-strong yet lightweight rim capable of repeatedly coping with the extreme demands that track driving brings. Developed direct from our racing programme, this exact family of VWR 'Cup Edition' EVO Alloy Wheels is based on the rims used in the Volkswagen Racing Cup and the British Touring Car Championship.  Now, our Cup Edition EVO wheel updates this classic design with lighter weight, a fresh new appearance and stunning detailing. The perfect track dimensions for MQB/MQBE of 8.5 x 18" diameter with an ET45 offset. Finished in a choice of stunning hard-wearing Satin Gunmetal Grey, Gloss Black, Matte Bronze or Motorsport White, all complete with RacingLine centre cap. Produced to the highest standards, developed and manufactured to exceed OEM standards. PERFECT FITMENT Fitment offset of ET45 for many VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD. LIGHT : STRONG Weighing 9.7kg / 21.3lbs per wheel, whilst crucially still retaining the strength needed for the demands of road or track. IDEAL FOR TRACK The choice of 18" rim is ideal for track use, allowing a higher, squarer tyre fitment without the risk of excessive rubbing. Precision engineered for Perfect Performance. Max. wheel load of 560kg tested to ISO 7141 for geometric accuracy, impact strength, structural fatigue and load rating requirements Knurled bead seats to prevent tyre slip/rotation Weight removed from the mounting face including drainage cutouts to ensure no trapped water or debris between wheel and hub face causing long term corrosion Choice of four durable finishes to look good, and stay looking good Confirmed applications. Fitment for all VWG models on MQB, MQB EVO and A5 platforms with 5x112 PCD: VWR610008 18 x 8.5 ET45 Gunmetal Grey   VWR610009 18 x 8.5 ET45 Motorsport White​ ​VWR610010 18 x 8.5 ET45 Gloss Black   VWR610011 18 x 8.5 ET45 Matte Bronze For motorsport use (eg. for vehicles with additional camber for arch clearance) we also offer an ET35 offset in Gunmetal Grey. VWR610100 18 x 8.5 ET35 Gunmetal Grey > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi SQ2 2018+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013   Strength matters. With a load rating of 560kg per wheel, these Cup Edition EVO wheels have the strength to cope with repeated, harsher track use.  It's essential for the rim to have this sort of strength engineered-in from the start. Just imagine the 'spike loads' running through a wheel hitting circuit kerbing (such as sausage kerbs) through a corner at speed. Obsessive weight saving. We've put a lot of development time into weight reduction, but without compromising strength. Incorporating cut-outs in the mounting face, material removal in the front and back of each spoke, even a groove running around the outer rim to save a few more grams. ​Knurled tyre bead seat. Another nice new feature incorporated into the design are knurled strips on the outer barrel of the wheel where the tyre bead seats.    A true motorsport feature that prevents unwanted tyre slip or rotation on the rim in extreme use. The result? 9.7kg / 21.3lbs per wheel, yet still retaining a load rating of 560kg.

Read more less

This is for UK Registration Plates only (Metal Pressed Plates & Euro Plates will not fit) Brand new to CEUK - the PlexiClick® Invisible Number plate holder system! Perfect for those who do not wish to drill their number plates or have big ugly framed number plate holders! Also perfect for those who swap their number plate for a show plate at events! Transform your vehicle with the PLEXICLICK Frameless Number Plate Holder Clips – the ideal combination of style, practicality, and durability. These frameless, clear clips are designed for quick and easy installation, providing a secure fit for your front and rear license plates without the need for drilling. Perfect for cars, vans, and other UK vehicles, these clips offer a clean, modern look with excellent performance. Whats in the kit? 4x Plexiclick® V3 for mounting two UK license plates 8x screws for fixing the clips to your vehicle 4x Anti Vibration Rubber Bungs 1x Instruction Manual Key Specifications: Material: Premium quality, weather-resistant plastic Fitment: Universal for UK standard license plates (front & rear) Color: Clear, frameless design Installation: Number plate just clicks into place and can be removed easily  

Read more less

supplied with replacement solenoid and has lower profile than T9351   The T9481 is a performance blow-off valve solution for the late-model VW, Audi, SEAT and Skoda vehicles. In summary, if you know your GFB valves, this is the same as the T9451 VTA but with an integrated solenoid valve for a lower stack height and greater engine bay clearance. If you want sound with your performance (or performance with your sound!), GFB’s T9481 VTA delivers! By combining atmosphere venting with the proven performance benefits of our ground-breaking DV+, the VTA delivers an aggressive blow-off sound, improved throttle response, as well as superior boost holding and reliability. With its low-profile integrated solenoid and compact design, installing the T9481 is a breeze. Just swap out your factory diverter valve with the VTA, and you’re good to go. Reliable Boost HoldingDespite some improvements in reliability by the latest generation of OEM diverter valves, the performance trade-offs remain. There is no escaping the fact that the moulded plastic valve mechanism of the OEM valve cannot reliably seal boost pressure. The VTA’s CNC-machined aluminium and brass valve components, combined with a Viton face seal ensure reliable boost holding even up to 50psi. Sharper Throttle Response, Faster Boost RecoveryOEM electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response. GFB’s patented “pilot actuation” system allows the VTA’s piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response. Unrivalled longevity, backed by our Lifetime WarrantyThe combination of precision manufacturing, attention to detail, and robust materials means the VTA will last a lifetime. So does the warranty. Why choose a VTA over a "BOV spacer"?Whilst “BOV spacers” might offer a cheap way to get a blow-off sound, they fail to tackle the fundamental performance and reliability issues associated with the OEM diverter valve - all they do is redirect the vented air. The VTA offers more than just sound. By replacing the OEM diverter valve you also get enhanced performance and reliability. FITS: Make Model Mark Variant Audi A1 8X1 3-Door Hatchback S1 quattro Audi A3 MK2 8P1 3-Door Hatchback 1.8 TFSI Audi A3 MK2 8P1 3-Door Hatchback 2.0 TFSI quattro Audi A3 MK2 8P1 3-Door Hatchback S3 quattro Audi A3 MK2 8P7 Cabriolet 1.8 TFSI Audi A3 MK2 8P7 Cabriolet 2.0 TFSI Audi A3 MK2 8PA 5-Door Sportback 1.8 TFSI Audi A3 MK2 8PA 5-Door Sportback 2.0 TFSI Audi A3 MK2 8PA 5-Door Sportback 2.0 TFSI quattro Audi A3 MK2 8PA 5-Door Sportback RS3 quattro 2.5 TFSI Audi A3 MK2 8PA 5-Door Sportback S3 quattro Audi A3 MK3 8V1 3-Door Hatchback 1.8 TFSI Audi A3 MK3 8V1 3-Door Hatchback 1.8 TFSI quattro Audi A3 MK3 8VA 5-Door Sportback RS3 quattro Audi A3 MK3 8VS Saloon / Limousine 1.8 TFSI Audi A3 MK3 8VS Saloon / Limousine 1.8 TFSI quattro Audi A4 B6 & B7 Cabriolet 2.0 TFSI 16V Audi A4 B7 Avant 2.0 TFSI Audi A4 B7 Saloon / Limousine 2.0 TFSI Audi A4 B8 Avant 1.8 TFSI Audi A4 B8 Avant 1.8 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI Audi A4 B8 Avant 2.0 TFSI quattro Audi A4 B8 Avant 2.0 TFSI quattro Audi A4 B8 Saloon / Limousine 1.8 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI Audi A4 B8 Saloon / Limousine 2.0 TFSI quattro Audi A4 B8 Saloon / Limousine 2.0 TFSI quattro Audi A4 B9 Avant 2.0 TFSI Audi A4 B9 Avant 2.0 TFSI Audi A4 B9 Saloon / Limousine 2.0 TFSI Audi A4 B9 Saloon / Limousine 2.0 TFSI quattro Audi A5 8F7 Cabriolet 1.8 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI Audi A5 8F7 Cabriolet 2.0 TFSI quattro Audi A5 8F7 Cabriolet 2.0 TFSI quattro Audi A5 8T3 Coupé 1.8 TFSI Audi A5 8T3 Coupé 2.0 TFSI Audi A5 8T3 Coupé 2.0 TFSI quattro Audi A5 8TA Sportback 1.8 TFSI Audi A5 8TA Sportback 2.0 TFSI Audi A5 8TA Sportback 2.0 TFSI Audi A5 8TA Sportback 2.0 TFSI quattro Audi A5 8TA Sportback 2.0 TFSI quattro Audi A6 C6 Avant 2.0 TFSI Audi A6 C6 Saloon / Limousine 2.0 TFSI Audi A6 C7 Avant 2.0 TFSI Audi A6 C7 Saloon / Limousine 2.0 TFSI Audi Q5 8RB 2.0 TFSI quattro Audi TT MK2 Coupé 8J 2.0 TFSI Audi TT MK2 Coupé 8J 2.0 TFSI Audi TT MK2 Coupé 8J 2.0 TFSI quattro Audi TT MK2 Coupé 8J 2.0 TTS quattro Audi TT MK2 Roadster 8J 2.0 TFSI Audi TT MK2 Roadster 8J 2.0 TFSI Audi TT MK2 Roadster 8J 2.0 TTS quattro Seat Alhambra 710, 711 1.8 TSI Seat Leon MK2 2.0 TFSI Seat Leon MK2 2.0 TFSI Cupra Seat Leon MK2 2.0 TFSI FR Skoda Octavia MK2 2.0 vRS Skoda Octavia MK2 2.0 vRS Skoda Octavia MK3 1.8 TSI Skoda Octavia MK3 1.8 TSI Skoda Octavia MK3 1.8 TSI 4x4 Skoda Octavia MK3 2.0 TSI RS Skoda Octavia MK3 2.0 TSI RS Skoda Octavia MK3 2.0 TSI vRS Skoda Octavia MK3 2.0 TSI vRS Skoda Octavia MK3 2.0 TSI vRS Volkswagen Beetle 5C1 2.0 TSI Volkswagen Beetle 5C1 2.0 TSI Volkswagen Beetle 5C7 2.0 TSI Volkswagen Beetle 5C7 2.0 TSI Volkswagen Golf MK5 2.0 GTI Volkswagen Golf MK5 2.0 GTI Edition 30 Volkswagen Golf MK6 2.0 GTI Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK6 2.0 R 4motion Volkswagen Golf MK7 2.0 GTI Volkswagen Jetta MK5 2.0 TFSI Volkswagen Jetta MK6 2.0 TSI Volkswagen Passat B6 2.0 FSI Volkswagen Passat B6 2.0 FSI Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 R Volkswagen Scirocco MK3 2.0 TSI Volkswagen Scirocco MK3 2.0 TSI Volkswagen Tiguan 5N 2.0 TFSI 4motion Volkswagen Tiguan 5N 2.0 TFSI 4motion Volkswagen Tiguan 5N 2.0 TSI 4motion Volkswagen Tiguan 5N 2.0 TSI 4motion

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped & high beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H8 or H11 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H8/11 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

For hydraulic brake and clutch systems. Meets and exceeds the current international specifications of U.S. FMVSS No. 16 DOT 4, SAE J1703 and ISO 4925 (Class 3) Suitable for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake systems and clutch systems; recommended where a non-petroleum-based medium has to be used. Not suitable for vehicles with mineral oil-based systems (e.g. certain Citroen models). If in doubt, consult the vehicle manual. Min. dry boiling point 260°C. Min. wet boiling point 165°C Notice Keep brake fluid clean and dry. Contamination by dirt, water, petroleum products or other materials can lead to brake failure or costly repairs. Store brake fluid only in its original container. Keep the container clean and tightly closed to prevent the accumulation of water. Do not refill the container and do not use it to store any other liquids. Dispose of used brake fluid responsibly (EU waste code 160113). Brake fluid damages paintwork – if spilled, wash off immediately using plenty of water.  DOT 4 Technical Info Contents 500 ml Colour Pale Amber Chemical basis Butoxyethanol Shelf life from production 36 Month Min. wet boiling point 165 °C Min. dry boiling point 260 °C Density 1.052 g/ml Density conditions at 20°C pH value 7-11

Read more less

Replacement Brake Pads for the Racingline 'Stage 2 Evo' 4-Piston Calipers - Stock CompoundThese are designed for standard road use and light fast road use. These are the ones which come in the kit when new. Wear indicators are not fitted to these pads - Track CompoundThese are designed for heavy fast road use only and light track use. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators are not fitted to these pads - EBC Yellowstuff CompoundDesigned for fast road use and light track day use. These 'R90' Approved pads are road legal, and offer slightly lower dust levels than stock pads. Wear indicators cannot be fitted to these pads- Ferodo DS PerformanceThese are designed for standard road use and enthusiastic fast road use.These are probably the best all rounder available for this kit and suit the needs of most of our customer's for Non-Tracked vehicles.Wear indicators cannot be fitted to these pads- Ferodo DS2500 CompoundThese are designed for more aggressive fast road use and ocasional 'beginner' track days. They have the same bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads - Ferodo DS3000 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pad- Pagid RSL-29 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pads - EBC RP1 CompoundDesigned for vehicles that are driven hard on track, RP1 possesses a modeately high friction level of 0.45 between 100 and 750 Celcius. This compound is an ideal heavy track use compound for over servo'd vehicles such as the VAG range. Wear indicators cannot be fitted to these pads - Tarox Corsa CompoundThese are ideal for fairly aggressive fast road use and ocasional 'beginner' track days. They have a reasonably good bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads- Tarox Competizione CompoundThese are designed for Track use only. They don't bite great from cold, however they have a higher heat range and a really good bite once up to temperature. Additional 'pad noise' and brake dust will be noticed. Wear indicators cannot be fitted to these pad Do I have the Old kit, or the EVO Kit? We have included an image in our listing to help customers check if they have the Older kit or the EVO Kit. EVO Kit - The EVO Kit can be identified by the shape of the caliper pistons being highlighted in the extenal design of the caliper. As well as this, the EVO Kit has a brace bar running down the Length of the Caliper.  VWR0323

Read more less

REAR UPPER WISHBONE INNER BUSH PFR85-514   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

REAR LOWER TRACK ROD INNER BUSH PFR85-512   OEM Part Number: Arm = 1K0501529F / 1K0 501 529 F OEM Part Number: Arm = 1K0501529J / 1K0 501 529 J OEM Part Number: Arm = 1K0501529C / 1K0 501 529 C --- REAR LOWER TRACK ROD INNER BUSH PFR85-512BLK   OEM Part Number: Arm = 1K0501529F / 1K0 501 529 F OEM Part Number: Arm = 1K0501529J / 1K0 501 529 J OEM Part Number: Arm = 1K0501529C / 1K0 501 529 C --- FITS: Audi A1 Quattro (2013), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Seat Alhambra MK2 (2010 - ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat CC 35 (2008-2012), Audi Q3 8U, Audi RSQ3 8U,  Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Volkswagen Sharan MK2 (2010 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Volkswagen Tiguan 5N MK1 (2007 - 2017), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Volkswagen Vento A5 (2005 - 2010), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

Replace your Awful Chrome R Line badges (Or add to cars without) with our full 4D Replacement Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges on your boot lid! Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them! Create your own look, with ANY colour Backing (Black on our badge) and Front (White on our badge) to give you a truly Unique experience! The price shown is for 1 Badge (105mm x 38mm) This is NOT a Gel Inlay - Your OEM Badge will need to be removed

Read more less

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Here we introduce to you our #Enhanced Edition H1 LED Upgrade. This product can NOT be used as a cornering light! Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. Unlike other suppliers, CEUK has developed an LED bulb which does not require the splicing of wires and difficult intricate clips to hold the lamp in place. This unit fits in its entirety as an OEM H1 Halogen bulb would. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of headlamps, different lamps and light units may give different results to those found in our pictures. Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H1 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Introducing the Enhanced Edition LED H8/11 Fog Bulb V3 This bulb will fit in both H8 and H11 Fitments and replaces the OEM fog light unit for an ultra bright replacement. This bulb can also be used as a dipped beam upgrade  Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Will fit in any vehicle which takes a H8 or H11 fitting provided you have about 1 inch of space behind the bulb! Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H8/11 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's.   

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V3 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white, But also supplied in the kit, is 2x Coloured films. 1 Film is 3000k Yellow, the second is 8000k White. Simply peel the self adhesive film off the backing and wrap it around the glass cover to change the output colour of your brand new bulb! Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these.  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 12,000 (6,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) 2x 3000k Yellow Tints 2x 8000k Blue Tints LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

Here we have our Bespoke dress up kits, One of the things that we are most famous for! Why do people spend thousands on making their engine bay look magical, but not replace the grubby rusty screws that come with your car from factory? That is a question we frequently ask, and we have the solution! We supply Anodized washers, complete with a stainless steel screw, to replace your existing ones and make your car really "Pop". The benefits are, Basically:- Your screws will never rust- You can select any colour you want!- It looks the bomb! This kit is for a Universal set of screws and washers in M6 fitment PLEASE ENSURE YOUR SCREWS ARE M6 BEFORE ORDERING! Contents: 10x Washer - 10x Stainless Steel Screw (M6)Locations: Headlights, Headlight Cover, Slam Panel etc You've seen these on eBay for £7, So why buy from us you ask...Well, The ones on eBay come with Cheaply made screws and washers, Our washers are made from a premium grade aluminium and anodized to last, and all our bolts are made from stainless steel!Our products are specific to your motor, And our replacement screws are direct stainless steel replicas of the factory screw. Meaning when they arrive, you fit them! No messing about, and no disappointment. Ad-Hoc screws and washers can be ordered, Please contact us for details!

Read more less

Description Here we introduce to you our #Enhanced Edition H7 LED V2 Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. The LED's come as standard 6000K ice white,  Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us at support@ceuk.org Please note - Some vehicles may require an LED clip of some sort to fit this item, message us direct if you want to clarify if your vehicle requires these. These are sold separately.   Good to know. High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps Technical Info Voltage: 12v Wattage: 50W Per Bulb Lumens: 20,000 (10,000 Per Bulb) What's in the box 2x H7 LED Units (6000k Default) LED clip not included - If required Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less