ECS Tuning

The Engineering team at ECS Tuning has spent countless hours in the development of the exclusive Audi 4.0T S6/S7 Luft-Technik (Air Technology) Cold Air Intake System.  This intake was precision engineered using state of the art laser scanning, dyno and flow bench testing, and 3D CAD technology to combine factory-like fitment in your engine bay with increased engine performance resulting in max gains of +36 WHP / +48 FT-LBS WTQ with an APR stage 1 tune! Designed for power, individual intake filters feed each turbo while diameter matched steps throughout the entire intake tract provide a smooth airflow path. The powder coated aluminum heat shield with bulb seal resists the performance robbing effects of heat soak by secluding the air filter and sealing against the hood. The turbo inlet hoses are crafted of a high quality fiber reinforced 5-ply silicone to achieve increased durability and resistance to collapsing.  This intake has been subjected to rigorous real world testing with verified performance gains on our in-house dyno and flow bench resulting in an increase of 36WHP and 48WTQ with an APR stage 1 tune and a 31.2% increase in flow rate over stock. The increase in turbocharger spool noise during heavy acceleration is an enthusiast's dream, giving hint to the added performance without being too intrusive. The end result of all of this effort is an intake system that combines fitment, quality and performance into one stunning package that will make a statement in your engine bay.   The ECS Tuning Luft-Technik Intake System features: Specifically crafted to fit Audi C7/C7.5 S6/S7 4.0T engines using all stock mounting locations Diameter matched steps in entire intake tract to provide a smooth airflow path along full inlet Individual intake filters for each turbo Fiber reinforced 5-ply silicone turbo inlets to hinder collapsing Powder Coated aluminum heat shield and inlet duct that seal to the hood to lower intake temps Conical hi-flow reusable air filters; featuring 8 ply cotton gauze construction and a bell mouth inlet to minimize restriction while maximizing filtration efficiency Stainless steel hardware & hose clamps for exceptional corrosion resistance and durability Broader and smoother torque curve for an enhanced driving experience Max gains of +36 WHP / +48 FT-LBS WTQ with an APR stage 1 tune Flow rate of 478.3 CFM compared to the stock intake at 364.6 CFM when tested at -9.0 in H2O - this is a 31.2% increase in flow rate! No modifications required, fully reversible installation Settle for nothing but the absolute best with ECS Tuning's Luft-Technik Intake Systems!  For help with installation please download or print ECS Tuning's in-depth PDF installation instructions found under the Installation tab.  ** Not CARB Approved. This Part Fits the Following Vehicles Make Model Submodel Engine Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Requires removal of the factory trunk spoiler Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B9 S4 and A4. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like!   4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. *Installation on the B9 S4 requires removal of the factory trunk spoiler. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Fits up to 2019 model year with *pre-facelift* front bumpers Raise the level of style on your B9 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front lip, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front Lip Spoiler was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your facelift B8.5 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8/B8.5 S4. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! **For B8-B8.5 chassis vehicles with an integrated trunk spoiler - see comparison photo above for reference. Fits all B8/B8.5 S4. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference plastic, wing, carbon fiber This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your pre-facelift B8 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. If you are looking for a whole package, this front lip is designed to compliment our flat side skirts (ES4045736) and rear bumper side splitters (ES4044452).  To further compliment the look of your new front lip, check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B9 S4 with the ECS Tuning Carbon Fiber Grille Overlay Set. This quality addition was engineered and designed in-house to fit directly to your factory grille, with no modifications required. These overlays cover up the existing chrome and add a more aggressive profile and design.  The overlays were designed to provide the vehicle with a more aggressive look by accentuating the trim area inside the grilles. An exclusive design only available through ECS Tuning, this grille overlay set will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Grille Overlay Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper side grille trim using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing a similar look to the "RS model" front bumpers. Features from the bumper, grille, and inlet grille are integrated into our design  Enhances the already existing grille flares for more aggressive “RS” styling Grille overlays extend across the inside of the inlet grille to cover any exposed chrome   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Overlay Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Overlays directly to the grille trim using the pre-applied adhesive tape. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B9 S4 or A4 S-line with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a similar look to the "RS model"front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing a similar look to the "RS model" front bumpers. Features from the bumper, grille, and inlet grille integrated into our design  Enhances the already existing grille flares for more aggressive “RS” styling Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B9 A4. An exclusive design only available through ECS Tuning, your new trunk spoiler will be sure to catch attention and turn heads. The spoiler is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid*.  To compliment the look of your new trunk spoiler, check out the ECS Carbon Fiber Grille Accent Set, Side Blades, Diffuser, and Front Lip, only available from ECS Tuning. *Installation on the B9 S4 requires removal of the factory trunk spoiler. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference rear spoiler, carbon spoiler, rear lip, carbon lip, lip spoiler, carbon fiber lip spoiler, rear wing, wing This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B9 A4/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Grille Accents, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. *Front Lip Spoiler was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* Cross Reference valance This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Audi B9 S4. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the other ECS Carbon Fiber products! **Not compatible with hands free open/close feature Cross Reference valance This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8 S4 with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a similar look to the RS model front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. 3M dual sided tape has been pre-applied to each piece, ready for installation right out of the box.  Note:  Due to slight variations in bumpers, we include extra 3M tape to use as needed.  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. To compliment the look of your new grille accents, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Front Lip, only available from ECS Tuning.   Previous Revisions 018360ECS01 Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Facelift B8 A4 S-Line or S4 with the ECS Tuning Carbon Fiber Front Lip Spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, and Diffuser, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8 A4 & S4. The spoiler is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  *For B8 chassis vehicles with an integrated trunk spoiler. Fits all B8/B8.5 S4. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference Spoiler This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your pre-facelift B8 S4 or A4 S-Line with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Pre-facelift B8 A4 S-Line/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Pre-Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Due to the very high temperatures and constant heat cycling the OEM screws encounter, the flimsy plastic will become brittle over time.  With almost 100% certainty, the stock screws will strip or break resulting in a coolant leak and an undrivable car if they are not replaced.  ECS Tuning has you covered - we designed precision machined 7075-T6 billet aluminum bleeder screws that will last a lifetime!   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 S4 Quattro 3.0T Audi C6 A6 All V6 3.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro V6 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Protection of your undercarriage and oil pan is vital. Between giant potholes, speed bumps and bumpy terrain your vehicle is exposed to a variety of impacts that can ruin your oil pan or other critical components. Protect your vitals with our ECS Tuning in-house design and engineered Street Shield Aluminum Skid Plate Kit. Constructed from strong and sturdy 5052 lightweight aluminum, our skid plate is sure to stand up to harsh road conditions that your OEM plastic belly pan could not. This plate is laser cut for a perfect fit and includes all new mounting hardware for the perfect finish.  We have incorporated an oil drain plug door so you don't have to remove the skid plate for an oil change.  It is designed to sit flush with the rest of the skid plate so there is nothing hanging down to catch on any road debris.  Engineered and manufactured in the USA, you can expect nothing but the best performance and longevity with our superior Aluminum Street Shield Skid Plate Kit from ECS Tuning! Be sure to check out our PDF attached below for complete installation instructions. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 SQ5 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Protection of your undercarriage and oil pan is vital. Between giant potholes, speed bumps and bumpy terrain your vehicle is exposed to a variety of impacts that can ruin your oil pan or other critical components. Protect your vitals with our ECS Tuning in-house design and engineered Street Shield Aluminum Skid Plate Kit. Constructed from strong and sturdy 5052 lightweight aluminum, our skid plate is sure to stand up to harsh road conditions that your OEM plastic belly pan could not. This plate is laser cut for a perfect fit and includes all new mounting hardware for the perfect finish.  We have incorporated an oil drain plug door so you don't have to remove the skid plate for an oil change.  It is designed to sit flush with the rest of the skid plate so there is nothing hanging down to catch on any road debris.  Engineered and manufactured in the USA, you can expect nothing but the best performance and longevity with our superior Aluminum Street Shield Skid Plate Kit from ECS Tuning! Be sure to check out our PDF attached below for complete installation instructions.

Read more less

The Engineering team at ECS Tuning has spent countless hours in the development of the exclusive Audi B9 RS5 2.9T Kohlefaser Luft-Technik (Carbon Fiber Air Technology) Cold Air Intake System. This intake was precision engineered using state of the art laser scanning, flow bench testing, and 3D CAD technology to combine factory-like fitment in your engine bay with increased engine performance. This intake is crafted of high quality hand laid carbon fiber with a fiberglass interior layer to achieve world class appearance and durability while resisting the performance robbing effects of heat soak. The turbo inlet hose is crafted of a high quality 4-ply silicone to achieve increased durability and resistance to collapsing.  We also include a bellmouth (velocity stack) filter flange inlet to reduce turbulence and maximize flow. This intake has been subjected to rigorous real world testing with verified performance gains on our in-house flow bench. At -12.0 in H2O test pressure, the stock intake had a flow rate of 362.0 CFM and our ECS intake had a flow rate of 462.7 CFM - an increase of 27.8%!  The increase in turbocharger spool noise during heavy acceleration is an enthusiast's dream, giving hint to the added performance without being too intrusive. The end result of all of this effort is an intake system that combines fitment, quality and performance into one stunning package that will make a statement in your engine bay.   The ECS Tuning Kohlefaser Luft-Technik Intake System features: Specifically crafted to fit Audi B9 RS5 2.9T engines, using stock mounting locations Carbon Fiber lid, carefully contoured to allow the smoothest flow path 4-ply silicone turbo inlet to hinder collapsing Powder Coated aluminum heat shield 3" conical hi-flow reusable air filter; featuring 8 ply cotton gauze construction and a bell mouth inlet to minimize restriction while maximizing filtration efficiency Stainless steel hardware & hose clamps for exceptional corrosion resistance and durability Broader and smoother torque curve for an enhanced driving experience 27.8% increase in flow rate compared to the stock intake No modifications required, fully reversible installation Complete install instructions provided! Settle for nothing but the absolute best with ECS Tuning's Kohlefaser Luft-Technik Intake Systems.  For additional help with heat protection, ECS Tuning has created pre-cut DEI Reflect-A-Gold to apply directly to the intake heat shield. Check out ES3610302 for more information. For help with installation please download or print ECS Tuning's in-depth PDF installation instructions found under the Installation tab.    *Not CARB Approved. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 RS5 Quattro 2.9T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The Engineering team at ECS Tuning has spent countless hours in the development of the exclusive Audi B9 RS5 2.9T Luft-Technik (Air Technology) Cold Air Intake System.  This intake was precision engineered using state of the art laser scanning, flow bench testing, and 3D CAD technology to combine factory-like fitment in your engine bay with increased engine performance. The powder coated aluminum heat shield resists the performance robbing effects of heat soak by secluding the air filter to the right side of the engine bay. The turbo inlet hose is crafted of a high quality 4-ply silicone to achieve increased durability and resistance to collapsing.  We also include a bellmouth (velocity stack) filter flange inlet to reduce turbulence and maximize flow. This intake has been subjected to rigorous real world testing with verified performance gains on our in-house flow bench. At -12.0 in H2O test pressure, the stock intake had a flow rate of 362.0 CFM and our ECS intake had a flow rate of 462.7 CFM - an increase of 27.8%!  The increase in turbocharger spool noise during heavy acceleration is an enthusiast's dream, giving hint to the added performance without being too intrusive. The end result of all of this effort is an intake system that combines fitment, quality and performance into one stunning package that will make a statement in your engine bay.   The ECS Tuning Kohlefaser Luft-Technik Intake System features: Specifically crafted to fit Audi B9 RS5 2.9T engines, using stock mounting locations 4-ply silicone turbo inlet to hinder collapsing Powder Coated aluminum heat shield 3" conical hi-flow reusable air filter; featuring 8 ply cotton gauze construction and a bell mouth inlet to minimize restriction while maximizing filtration efficiency Stainless steel hardware & hose clamps for exceptional corrosion resistance and durability Broader and smoother torque curve for an enhanced driving experience 27.8% increase in flow rate compared to the stock intake No modifications required, fully reversible installation Complete install instructions provided! Settle for nothing but the absolute best with ECS Tuning's Luft-Technik Intake Systems.  For additional help with heat protection, ECS Tuning has created pre-cut DEI Reflect-A-Gold to apply directly to the intake heat shield. Check out ES3610303 for more information. For help with installation please download or print ECS Tuning's in-depth PDF installation instructions found under the Installation tab.    *Not CARB Approved. Install photos shown on an S4, fit and aesthetic will be virtually identical. New install photos coming soon.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 RS5 Quattro 2.9T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less